Microstructure evolution and mechanical properties of a high-strength Ti2AlNb alloy processed by large-strain two-pass hot extrusion
Source abstract
Abstract
The microstructure evolution and tensile behavior of Ti 2AlNb alloy (Ti-22Al-23Nb-1Mo-1Zr) processed by two-pass hot extrusion and two-step heat treatment were investigated. After extruding deformation in the B2 phase field, the B2 grains were refined from about 1500–50 µm through dynamic recrystallization. The microstructures subjected to solution treatment in the B2 + α 2 phase field and aging treatment in the B2 + O phase field include B2 matrix, lamellar O, rim O and lamellarα 2 /O phases. The microstructure and tensile properties are sensitive to aging temperature. As the increase of the aging temperature, the content of the B2 phase and the size of the lamellar O phase increase, resulting in low strength and high ductility. The alloy aged at 800 °C has a good match of strength and ductility. It has an elongation of 6.3% with a tensile strength as high as 1225 MPa due to the precipitation strengthening of numerous lamellar O phase and fine grain strengthening. The tensile fracture mode predominantly shows quasi-cleavage characteristics with typical cleavage facets and massive dimples, which is consistent with the good balance of tensile strength and ductility. An in-depth understanding of the relationship between microstructure and tensile properties in this study can be helpful for the engineering application of the Ti 2AlNb alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Microstructure analysis on enhancing mechanical properties at 750°C and room temperature of Ti-22Al-24Nb-0.5Mo alloy tubes fabricated by hot gas forming10.1016/j.jallcom.2019.03.040 ↗
2. Microstructure and mechanical properties of orthorhombic alloys in the Ti-Al-Nb system10.1016/S0966-9795(98)00044-2 ↗
3. A new ordered orthorhombic phase in a Ti3Al-Nb alloy10.1016/0001-6160(88)90141-1 ↗
4. Fabricating Ti2AlNb sheet with high tensile strength and good ductility by hot packed rolling the spark plasma sintered pre-alloyed powder
5. Effect of cooling rate on phase transformation in Ti2AlNb alloy10.1016/j.jallcom.2021.162364 ↗
6. Study on laser welding of a Ti-22Al-25Nb alloy: microstructural evolution and high temperature brittle behavior10.1016/j.jallcom.2016.04.212 ↗
7. Fabrication of a powder metallurgy Ti2AlNb-based alloy by spark plasma sintering and associated microstructure optimization10.1016/j.matdes.2015.10.042 ↗
8. Microstructure and mechanical properties of a new Ti2AlNb-based alloy after aging treatment10.1007/s12598-018-1107-x ↗
9. Instability of the O-phase in Ti-22Al-25Nb alloy during elevated-temperature deformation10.1016/j.jallcom.2013.05.018 ↗
10. High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy10.1016/j.matchar.2018.01.019 ↗
11. Microstructures and tensile properties of Ti2AlNb and Mo-modified Ti2AlNb alloys fabricated by hot isostatic pressing10.1016/j.msea.2020.139043 ↗
12. Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion10.1016/j.msea.2017.05.019 ↗
13. The enhanced tensile property by introducing bimodal size distribution of lamellar O for O+B2 Ti2AlNb based alloy10.1016/j.msea.2013.07.047 ↗
14. Microstructure and mechanical properties of non-flammable Mg-8Al-0.3Zn-0.1Mn-0.3Ca-0.2Y alloy subjected to low-temperature, low-speed extrusion10.1016/j.jallcom.2017.12.229 ↗
15. Effect of extrusion speed on microstructure, mechanical properties and work-hardening of multi-microalloying MgAlCoCrFeNi alloy10.1016/j.jallcom.2021.162706 ↗
16. A novel dynamic extrusion for microstructure tailoring and evading strength-ductility trade-off in AZ31 magnesium alloy10.1016/j.jallcom.2021.159411 ↗
17. Effect of composition on the mechanical properties of newly developed Ti2AlNb-based titanium aluminide10.1016/j.intermet.2004.12.003 ↗
18. Quasi cleavage fracture of the bimodal size lamellar O phase microstructure of a Ti2AlNb based alloy10.1016/j.jallcom.2019.05.157 ↗
19. Precipitation behavior of widmansttten O phase associated with interface in aged Ti2AlNb-based alloys10.1016/j.matchar.2018.09.009 ↗
20. Effect of heat treatments on the microstructure and mechanical properties of Ti2AlNb intermetallic fabricated by selective laser melting10.1016/j.msea.2021.141352 ↗
21. B2 grain size refinement and its effect on room temperature tensile properties of a Ti-22Al-27Nb orthorhombic intermetallic alloy10.1016/S1359-6462(02)00462-1 ↗
22. Effects of annealing on microstructure and deformation uniformity of Ti-22Al-24Nb-0.5Mo laser-welded joints10.1016/j.matdes.2017.05.005 ↗
23. Anti-correlation between solution strengthening and precipitation strengthening in lamellar O microstructures of a Ti2AlNb based alloy10.1016/j.jallcom.2020.156470 ↗
24. Achieving high ductility of Ti2AlNb sheet without sacrificing the tensile strength without post heat treatment10.1016/j.msea.2022.142897 ↗
25. In situ tensile deformation and fracture behavior of Ti-24Al-14Nb-3V-0.5Mo alloy with various microstructures10.1016/j.intermet.2003.07.007 ↗
26. Part I. The microstructural evolution in Ti-Al-Nb O+Bcc orthorhombic alloys
27. Transformations in a Ti-24Al-15Nb alloy: part I. phase equilibria and microstructure10.1007/BF02801158 ↗
28. A comparison study of microstructure and mechanical properties of Ti-24Al-14Nb-3V-0.5Mo with and without Si10.1007/s11661-000-0138-7 ↗
29. Improvement of room temperature ductility for Mo and Fe modified Ti2AlNb alloy10.1016/j.msea.2010.09.003 ↗
30. Microstructure and mechanical properties of a Ti-22Al-25Nb alloy fabricated from elemental powders by mechanical alloying and spark plasma sintering10.1016/j.jallcom.2017.01.354 ↗
31. Coarsening behavior of lamellar orthorhombic phase and its effect on tensile properties for the Ti-22Al-25Nb alloy10.1016/j.msea.2014.05.076 ↗
32. Deformation of the O and α2 phases in the Ti-Al-Nb System10.1080/01418619508243931 ↗
33. Microstructure evolution and mechanical properties of linear friction welded Ti2AlNb alloy10.1016/j.jallcom.2015.05.198 ↗
34. The effect of annealing on microstructure and tensile properties of Ti-22Al-25Nb electron beam weld joint10.1016/j.intermet.2016.02.006 ↗
35. Solution treatment for enhanced hardness in Mo-modified Ti2AlNb-based alloys10.1016/j.jallcom.2019.07.149 ↗
36. Microstructure control and mechanical properties from isothermal forging and heat treatment of Ti-22Al-25Nb (at%) orthorhombic alloy10.1016/j.intermet.2014.07.011 ↗
37. Origin of the O phase and its effect on the mechanical properties of rolled Ti-22Al-25Nb alloy sheets10.1080/09603409.2021.1886520 ↗
38. Microstructural evolution and mechanical properties of linear friction welded Ti2AlNb joint during solution and aging treatment10.1016/j.msea.2016.05.030 ↗
39. Microstructure, creep, and tensile behavior of a Ti-21Al-29Nb (at%) orthorhombic+B2 alloy10.1016/j.intermet.2005.08.006 ↗
40. Temperature dependent dislocation bypass mechanism for coherent precipitates in Cu-Co alloys10.1016/j.actamat.2016.03.027 ↗