journal article·2023-03

Cobalt free refractory high entropy alloys for total joint arthroplasty: In-vitro wear, corrosion and cytocompatibility evaluation

Avinash Chavan, Santanu Mandal, Mangal Roy

Publisher page

Abstract

CoCrMo alloys are extensively used for bearing surfaces in total joint arthroplasty (TJA); however, Co poisoning remains a concern. Therefore, we propose a Co free refractory metal based high entropy alloys (RHEAs) for use in TJA. In this work, TiMoNbTaW based RHEA was prepared by arc melting. The alloy was further modified by Cr addition for improvement in wear, corrosion and cytocompatibility. X-ray diffraction revealed single bcc crystal structure where lattice constant decreased upon Cr addition. The improved hardness, yield strength and a ten-fold enhancement in wear resistance with Cr addition is ascribed to its severely distorted bcc lattice. In-vitro corrosion in Hank’s salt solution (HBSS) suggests superior thermodynamic stability and passivation of both RHEAs. Enhanced pitting resistance was seen upon Cr addition. Further, electrochemical impedance spectroscopy (EIS) analysis of the surface film showed an increase in film resistance by an order of magnitude attributed to the presence of Cr 2O 3 on the TiMoNbTaWCr surface as confirmed by X-Ray photoelectron spectroscopy (XPS) analysis after anodic passivation. Meanwhile, the live/dead imaging and MTT assay indicated good cell viability and proliferation of RHEAs. However, an enhanced cell adhesion and growth on TiMoNbTaWCr RHEA proves its potential applicability as a bearing surface in TJA.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Characterization of Co–Cr–Mo alloys after a thermal treatment for high wear resistance10.1016/j.msec.2012.05.003 ↗
2. Incidence of modern alumina ceramic and alumina matrix composite femoral head failures in nearly 6 million hip implants10.1016/j.arth.2016.08.011 ↗
3. Cast vs. wrought cobalt-chromium surgical implant alloys10.1002/jbm.820090205 ↗
4. Wear of CoCrMo alloys used in metal-on-metal hip joints: a tribocorrosion appraisal10.1016/j.wear.2012.11.061 ↗
5. Surface chemistry and microstructure of metallic biomaterials for hip and knee endoprostheses10.1016/j.apsusc.2017.08.007 ↗
6. Cobalt–chromium dental alloys: metal exposures, toxicological risks, CMR classification, and EU regulatory framework10.3390/cryst10121151 ↗
7. Ceramic failure after total hip arthroplasty with an alumina-on-alumina bearing
8. Tribocorrosion studies of metallic biomaterials: The effect of plasma nitriding and DLC surface modifications10.1016/j.jmbbm.2016.06.014 ↗
9. Newly developed Ti–Nb–Zr–Ta–Si–Fe biomedical beta titanium alloys with increased strength and enhanced biocompatibility10.1016/j.msec.2015.11.043 ↗
10. Correlation of the nanostructure of the anodic layers fabricated on Ti13Nb13Zr with the electrochemical impedance response10.1016/j.corsci.2015.01.041 ↗
11. Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy10.1016/j.intermet.2020.106845 ↗
12. Biocompatible high entropy alloys with excellent degradation resistance in a simulated physiological environment10.1021/acsabm.0c01181 ↗
13. Novel Ti–Zr–Hf–Fe nanostructured alloy for biomedical applications10.3390/ma6114930 ↗
14. Novel Ti-Zr-Hf-Nb-Fe refractory high-entropy alloys for potential biomedical applications10.1016/j.jallcom.2022.164383 ↗
15. An overview of high-entropy alloys as biomaterials10.3390/met11040648 ↗
16. Novel Ti-Zr-Hf-Nb-Fe refractory high-entropy alloys for potential biomedical applications10.1016/j.jallcom.2022.164383 ↗
17. Ti–Zr–Hf–Nb–Ta–Sn high-entropy alloys with good properties as potential biomaterials10.1007/s12598-021-01938-3 ↗
18. TiZrNbTa)90Mo10 high-entropy alloy: electrochemical behavior and passive film characterization under exposure to Ringer’s solution10.1016/j.corsci.2020.108513 ↗
19. Design and fabrication of Ti–Zr-Hf-Cr-Mo and Ti–Zr-Hf-Co-Cr-Mo high-entropy alloys as metallic biomaterials10.1016/j.msec.2019.110322 ↗
20. Design and development of Ti–Zr–Hf–Nb–Ta–Mo high-entropy alloys for metallic biomaterials10.1016/j.matdes.2021.109548 ↗
21. Effects of Mo content on the microstructure and mechanical properties of TiNbZrMox high-entropy alloys10.1016/j.jallcom.2022.167373 ↗
22. A review of biomaterials based on high-entropy alloys10.3390/met12111940 ↗
23. Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys10.1016/j.jallcom.2020.157997 ↗
24. TiZrNbTaMo high-entropy alloy designed for orthopedic implants: As-cast microstructure and mechanical properties10.1016/j.msec.2016.12.057 ↗
25. Atomic packing efficiency and phase transition in a high entropy alloy10.1016/j.jallcom.2008.11.059 ↗
26. Senary refractory high-entropy alloy CrxMoNbTaVW10.1016/j.calphad.2015.09.007 ↗
27. Microstructures and mechanical properties of TixNbMoTaW refractory high-entropy alloys10.1016/j.msea.2017.12.004 ↗
28. Influence of Cr content on the microstructure and mechanical properties of CrxFeNiCu high entropy alloys10.1016/j.pnsc.2020.01.012 ↗
29. Effect of Cr content on microstructure and properties of Mo0.5VNbTiCrx high-entropy alloys10.1016/j.jallcom.2019.153352 ↗
30. The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures10.1016/j.wear.2019.03.002 ↗
31. Corrosion behavior of Ti–Nb–Ta–Zr–Fe alloy for biomedical applications in Ringer’s solution10.1016/S1003-6326(15)63875-4 ↗
32. Corrosion behavior of Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy in aqueous chloride solutions10.1016/j.elecom.2018.11.009 ↗
33. Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys10.1016/j.intermet.2017.01.007 ↗
34. Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials10.1016/j.scriptamat.2016.10.028 ↗
35. Development of non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials10.1016/j.scriptamat.2019.07.011 ↗
36. Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys10.1016/j.jallcom.2020.157997 ↗
37. Updates in biomaterials of bearing surfaces in total hip arthroplasty10.1186/s42836-021-00092-6 ↗
38. Materials for hip prostheses: a review of wear and loading considerations10.3390/ma12030495 ↗
39. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
40. Mechanical properties of refractory high-entropy alloys: Experiments and modeling10.1016/j.jallcom.2016.11.188 ↗
41. Solid-solution strengthening in refractory high entropy alloys10.1016/j.actamat.2019.06.006 ↗
42. A general formulation for solid solution hardening effect in multicomponent alloys10.1016/j.scriptamat.2016.09.009 ↗
43. Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K10.1016/j.actamat.2019.10.015 ↗
44. Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys10.1016/j.msea.2011.11.044 ↗
45. Design and fabrication of Ti–Zr-Hf-Cr-Mo and Ti–Zr-Hf-Co-Cr-Mo high-entropy alloys as metallic biomaterials10.1016/j.msec.2019.110322 ↗
46. On the role of Cr in the passivity of stainless steel10.1149/1.2108450 ↗
47. Mechanisms of Cr and Mo enrichments in the passive oxide film on 316L austenitic stainless steel10.3389/fmats.2019.00232 ↗
48. Microstructure and corrosion properties of laser remelted CrFeCoNi and CrMnFeCoNi high entropy alloys coatings10.1016/j.jmrt.2021.10.042 ↗
49. Cytocompatibility of pure metals and experimental binary titanium alloys for implant materials10.1016/j.jdent.2013.09.003 ↗
50. Tribological, biocompatibility, and antibiofilm properties of tungsten–germanium coating using magnetron sputtering10.1007/s10856-020-06477-4 ↗
51. A perspective on molybdenum biocompatibility and antimicrobial activity for applications in implants10.1007/s10853-015-9664-y ↗
52. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles | SpringerLink, (n.d.). 〈https://link.springer.com/article/10.1186/2251–7235-6–6〉 (accessed January 4, 2022).
53. Partition coefficients and their uses10.1021/cr60274a001 ↗
54. Hydroxyapatite reinforced Ti6Al4V composites for load-bearing implants10.1016/j.actbio.2020.12.060 ↗
55. Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy10.1016/j.intermet.2020.106845 ↗
56. Corrosion and tribocorrosion behavior of equiatomic refractory medium entropy TiZr(Hf, Ta, Nb) alloys in chloride solutions10.1016/j.corsci.2022.110166 ↗
57. Electrochemical and XPS studies of a Nb-containing Ti-based glass-forming alloy system in H2SO4 solution10.1016/j.elecom.2015.09.001 ↗
58. Electrochemical properties, chemical composition and thickness of passive film formed on novel Ti–20Nb–10Zr–5Ta alloy10.1016/j.electacta.2013.03.086 ↗
59. Corrosion behavior and surface film characterization of TaNbHfZrTi high entropy alloy in aggressive nitric acid medium10.1016/j.intermet.2017.06.002 ↗
60. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
61. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys: Journal of Applied Physics: Vol 109, No 10, (n.d.). 〈https://aip.scitation.org/doi/full/10.1063/1.3587228〉 (accessed April 19, 2022).
62. Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal elements10.1016/j.matchemphys.2007.01.003 ↗
63. Lattice-distortion dependent yield strength in high entropy alloys10.1016/j.msea.2020.139323 ↗
64. An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.09.032 ↗
65. Effect of Al addition on the microstructure, mechanical and wear properties of TiZrNbHf refractory high entropy alloys
66. Lattice distortion in a strong and ductile refractory high-entropy alloy10.1016/j.actamat.2018.08.053 ↗
67. Local lattice distortion in high-entropy alloys
68. Lattice distortion as an estimator of solid solution strengthening in high-entropy alloys10.1016/j.matchar.2021.110877 ↗
69. A critical analysis of the X-ray diffraction intensities in concentrated multicomponent alloys10.3139/146.111762 ↗
70. High-entropy alloys – a new era of exploitation10.4028/www.scientific.net/MSF.560.1 ↗
71. AlxCoCrFeNiSi high entropy alloy coatings with high microhardness and improved wear resistance10.1016/j.surfcoat.2020.126328 ↗
72. Effect of Al addition on the microstructure, mechanical and wear properties of TiZrNbHf refractory high entropy alloys10.1016/j.triboint.2021.107031 ↗
73. Reciprocating wear behaviour of TiC-stainless steel cermets10.1016/j.triboint.2016.10.012 ↗
74. Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy10.1016/j.matchemphys.2017.05.029 ↗
75. Accelerated formation of tribo-oxide layer and its effect on sliding wear of a titanium alloy10.1007/s11249-016-0694-7 ↗
76. High-temperature solid lubricants and self-lubricating composites: a critical review10.3390/lubricants10080177 ↗
77. Reusable chromium oxide coating with lubricating behavior from 25 to 1000°C due to a self-assembled mesh-like surface structure10.1016/j.surfcoat.2016.12.082 ↗
78. Ti based biomaterials, the ultimate choice for orthopaedic implants – A review10.1016/j.pmatsci.2008.06.004 ↗
79. Investigations on microstructure and properties of Ti-Nb-Zr medium-entropy alloys for metallic biomaterials10.1016/j.intermet.2022.107568 ↗
80. Corrosion performance and surface analysis of Ti–Ni–Pd–Ru–Cr alloy in nitric acid solution10.1016/j.corsci.2014.11.010 ↗
81. The effect of surface enriched chromium and grain refinement by ball milling on corrosion resistance of 316L stainless steel10.1016/j.materresbull.2017.03.022 ↗
82. Electronic properties of the passive films formed on CoCrFeNi and CoCrFeNiAl high entropy alloys in sodium chloride solution10.1016/j.jmrt.2020.10.002 ↗
83. Corrosion-resistant high-entropy alloys: a review10.3390/met7020043 ↗
84. Design and properties of novel Ti–Zr–Hf–Nb–Ta high-entropy alloys for biomedical applications10.1016/j.intermet.2021.107421 ↗