journal article·2023-03

Synthesis of SnS2/SnO2 nano-heterojunctions with increased reactive sites and charge transfer for ultrasensitive NH3 detection

Xiaolin Jiang, Yuhua Zhen, Yao Feng, Zhengren Yang, Zheng Qin

Publisher page

Abstract

In this work, the hydrothermally synthesized SnS 2 nanosheets were calcined to form SnO 2 nanoparticle decorated SnS 2 nanosheets. The formed "raisin cake" SnS 2/SnO 2 complex increases the specific surface area and provides more contact area for gas molecule adsorption. The SnS 2/SnO 2 nanocomposite has a high sensing response to 50 ppm NH 3 (392) and an excellent response/recovery time (6/8 s) to 50 ppm at room temperature. Therefore, SnS 2/SnO 2 nanocomposite has excellent repeatability, excellent NH 3 gas selectivity, and humidity stability. And it is discussed that the reason for the enhanced NH 3 sensing mechanism is the synergistic effect of SnS 2/SnO 2 structures. The existence of heterojunction was proved by XPS. These results demonstrate that the sensing material can effectively detect NH 3 gas.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Monolayer Ti2CO2: a promising candidate for NH3 sensor or capturer with high sensitivity and selectivity10.1021/acsami.5b03737 ↗
2. Preparing large-scale WO3 nanowire-like structure for high sensitivity NH3 gas sensor through a simple route10.1016/j.cap.2010.11.002 ↗
3. Highly sensitive thin film NH3 gas sensor operating at room temperature based on SnO2/MWCNTs composite10.1016/j.snb.2007.09.088 ↗
4. Enhanced sensitivity and stability of room-temperature NH3 sensors using core-shell CeO2 nanoparticles@ cross-linked PANI with p–n heterojunctions10.1021/am503286h ↗
5. Ultrasensitive room temperature NH3 sensor based on a graphene–polyaniline hybrid loaded on PET thin film10.1039/C5CC01241D ↗
6. Hybrid polyaniline-WO3 flexible sensor: A room temperature competence towards NH3 gas10.1016/j.snb.2019.02.094 ↗
7. Core-shell Au@SiO2 nanocrystals doped PANI for highly sensitive, reproducible and flexible ammonia sensor at room temperature[J]10.1016/j.apsusc.2022.153821 ↗
8. A high-performance flexible gas sensor based on self-assembled PANI-CeO2 nanocomposite thin film for trace-level NH3 detection at room temperature10.1016/j.snb.2017.12.022 ↗
9. Embedded SnO2/Diatomaceous earth composites for fast humidity sensing and controlling properties10.1016/j.snb.2019.127137 ↗
10. Room-temperature gas sensor based on in situ grown, etched and W-doped ZnO nanotubes functionalized with Pt nanoparticles for the detection of low-concentration H2S10.1016/j.jallcom.2022.166158 ↗
11. One-pot hydrothermal growth of indium oxide-CNT heterostructure via single walled carbon nanotube scaffolds and their application toward flexible NO2 gas sensors10.1016/j.jallcom.2022.166169 ↗
12. Bimetal PdAu decorated SnO2 nanosheets based gas sensor with temperature-dependent dual selectivity for detecting formaldehyde and acetone10.1016/j.snb.2018.09.117 ↗
13. New approaches for improving semiconductor gas sensors10.1016/0925-4005(91)80213-4 ↗
14. Heterocontact type CuO-modified SnO2 sensor for the detection of a ppm level H2S gas at room temperature10.1016/j.snb.2006.02.022 ↗
15. Sensitivity and selectivity of (Au, Pt, Pd)-loaded and (In, Fe)-doped SnO2 sensors for H2 and CO detection
16. Janus gas: Reversible redox transition of Sarin enables its selective detection by an ethanol modified nanoporous SnO2 chemiresistor10.1039/C5CC01798J ↗
17. Analysis of the noble metal catalytic additives introduced by impregnation of as obtained SnO2 sol–gel nanocrystals for gas sensors10.1016/S0925-4005(00)00565-7 ↗
18. Fabrication of a humidity-resistant formaldehyde gas sensor through layering a molecular sieve on 3D ordered macroporous SnO2 decorated with Au nanoparticles
19. The construction of ZnO/SnO2 heterostructure on reduced graphene oxide for enhanced nitrogen dioxide sensitive performances at room temperature
20. Ammonia gas sensors based on poly (3-hexylthiophene)-molybdenum disulfide film transistors10.1088/0957-4484/27/6/065502 ↗
21. Flexible and highly sensitive H2S gas sensor based on in-situ polymerized SnO2/rGO/PANI ternary nanocomposite with application in halitosis diagnosis10.1016/j.snb.2019.03.055 ↗
22. NH3 gas sensor based on Pd/SnO2/RGO ternary composite operated at room-temperature10.1016/j.snb.2015.09.091 ↗
23. Hierarchical In2O3@SnO2 core-shell nanofiber for high efficiency formaldehyde detection10.1021/acsami.9b16599 ↗
24. Response to NO2 and other gases of resistive chemically exfoliated MoS2-based gas sensors10.1016/j.snb.2014.10.099 ↗
25. Plasmon-enhanced exciton emissions and Raman scattering of CVD-grown monolayer WS2 on Ag nanoprism arrays10.1016/j.apsusc.2019.144252 ↗
26. Room Temperature Acetone-Sensing Properties of Ru-Doped MoSe2 Nanoflowers: Experimental and Density Functional Theory Study10.1109/LED.2021.3067895 ↗
27. In-situ sulfidation-derived three-dimensional cobalt sulfide nanoflower/graphene nanosheet hybrid for ultrasensitive room-temperature NO2 gas sensor10.1016/j.jallcom.2022.166868 ↗
28. Two-dimensional SnS2 materials as highperformance NO2 sensors with fast response and high sensitivity10.1016/j.snb.2017.08.091 ↗
29. Ultra-sensitive NH3 sensor based on flowershaped SnS2 nanostructures with sub-ppm detection ability10.1016/j.jhazmat.2017.07.060 ↗
30. Enhanced room-temperature NH3 gas sensing by 2D SnS2 with sulfur vacancies synthesized by chemical exfoliation10.1016/j.snb.2018.02.060 ↗
31. Thermal decomposition of thiourea complexes of Cu(I), Zn (II), and Sn (II) chlorides as precursors for the spray pyrolysis deposition of sulfide thin films10.1016/S0167-2738(01)00740-8 ↗
32. Characterization of a hybrid composite of SnO2 nanocrystal-decorated reduced graphene oxide for ppm-level ethanol gas sensing application10.1039/C4RA14611E ↗
33. Ultrasound-assisted electrodeposition of SnS: Effect of ultrasound waves on the physical properties of nanostructured SnS thin films10.1016/j.jallcom.2016.06.201 ↗
34. Boosted charge transfer in SnS/SnO2 heterostructures: toward high rate capability for sodium-ion batteries10.1002/anie.201510978 ↗
35. Sulfur dioxide gas sensing at room temperature based on tin selenium/tin dioxide hybrid prepared via hydrothermal and surface oxidation treatment10.1007/s12598-020-01575-2 ↗
36. High-performance visible-light-driven SnS2/SnO2 nanocomposite photocatalyst prepared via in situ hydrothermal oxidation of SnS2 nanoparticles10.1021/am200102y ↗
37. Template-oriented synthesis of monodispersed SnS2@SnO2 hetero-nanoflowers for Cr (VI) photoreduction10.1016/j.apcatb.2016.03.035 ↗
38. Gas sensing mechanisms of metal oxide semiconductors: a focus review10.1039/C9NR07699A ↗
39. Metal-organic framework-derived Cr-doped hollow In2O3 nanoboxes with excellent gas-sensing performance toward ammonia10.1016/j.jallcom.2021.160472 ↗
40. A review on chemiresistive room temperature gas sensors based on metal oxide nanostructures, graphene and 2D transition metal dichalcogenides10.1007/s00604-018-2750-5 ↗
41. Spindle-like Fe2O3/ZnFe2O4 porous nanocomposites derived from metal-organic frameworks with excellent sensing performance towards triethylamine10.1016/j.snb.2020.128205 ↗
42. Fabrication of a humidity-resistant formaldehyde gas sensor through layering a molecular sieve on 3D ordered macroporous SnO2 decorated with Au nanoparticles
43. Hierarchical 3D nanostructure of GdInO3 and reduced-graphene-decorated GdInO3 nanocomposite for CO sensing applications10.1016/j.snb.2016.04.043 ↗
44. MoO2-Ni-graphene ternary nanocomposite for a high-performance room temperature ethanol gas sensor10.1016/j.apsusc.2021.149595 ↗
45. Two-step hydrothermal fabrication of CeO2-loaded MoS2 nanoflowers for ethanol gas sensing application10.1016/j.apsusc.2021.150942 ↗
46. Tuning the electronic structure of tin sulfides grown by atomic layer deposition10.1021/am401127s ↗
47. Room-temperature gas sensing based on electron transfer between discrete tin oxide nanocrystals and multiwalled carbon nanotubes
48. On the construction of hollow nanofibers of ZnO-SnO2 heterojunctions to enhance the NO2 sensing properties10.1016/j.snb.2018.03.055 ↗
49. Zeolitic imidazolate framework-8 (ZIF-8)- coated In2O3 nanofibers as an efficient sensing material for ppb-level NO2 detection10.1016/j.jcis.2019.01.052 ↗
50. Enhanced NO2 sensing of SnO2/SnS2 heterojunction-based sensor10.1016/j.snb.2016.12.125 ↗
51. Ammonia sensing properties of twodimensional tin disulphide/tin oxides (SnS2/SnO2−x) mixed phases10.1016/j.jallcom.2018.12.110 ↗
52. Interface-bonds determined gas sensing of SnO2-SnS2 hybrids to ammonia at room temperature10.1021/acsami.5b01856 ↗
53. Precise preparation of WO3@ SnO2 core shell nanosheets for efficient NH3 gas sensing10.1016/j.jcis.2020.02.042 ↗
54. PtO2-decorated MoS2 ultrathin nanostructures for enhanced NH3 gas sensing properties10.1016/j.mssp.2022.106990 ↗
55. A novel coral-shaped Dy2O3 gas sensor for high sensitivity NH3 detection at room temperature10.1016/j.snb.2017.08.117 ↗