journal article·2023-07

Ignition-resistant Mg‐2Y‐2Gd‐1Ca alloy for aviation applications

Peter Minárik, Klára Hosová, Stanislav Šašek, Jiří Kubásek, Jozef Veselý, Robert Král, Miroslav Čavojský, Jitka Stráská, Dalibor Vojtěch

Publisher page

Abstract

Novel Mg‐2Y‐2Gd‐1Ca alloy was processed by extrusion or equal channel angular pressing (ECAP) to analyse the effect of the microstructure on ignition temperature, mechanical properties and corrosion resistance. The ignition temperature measured by a linear heating experiment in the electric furnace was found to be ≈ 950 °C, regardless of the microstructure of processed materials. The ignition temperature of the alloy is 300 °C higher than that of as-cast magnesium, thanks to the presence of alloying elements and the formation of the stable oxide. Thermogravimetry analysis and differential thermal analysis revealed that the onset of the oxidation process is ≈ 50 °C below this temperature. Partially recrystallised microstructure after extrusion led to a good combination of strength and ductility of the studied alloy. On the other hand, ECAP-processed material is characterised by a higher strength but lower ductility. Initial corrosion attack is significantly affected by the processing technique, but the difference diminishes within the first day of immersion in 3.5% NaCl solution, and the corrosion rate is comparable after one week of immersion. The only difference is in the distribution of the corrosion attack, which is more localised in extruded samples because of the occurrence of larger Mg 2Ca particles compared to the ECAP-processed one.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Controlling the ignition and flammability of magnesium for aerospace applications10.1016/j.corsci.2014.04.047 ↗
2. Explosion characteristics of micron- and nano-size magnesium powders10.1016/j.jlp.2013.11.001 ↗
3. Minimum ignition energies of pure magnesium powders due to electrostatic discharges and nitrogen’s effect10.1016/j.jlp.2016.03.008 ↗
4. A review on ignition mechanisms and characteristics of magnesium alloys10.1016/j.jma.2019.11.014 ↗
5. The high temperature oxidation and ignition behavior of Mg–Nd alloys part I: The oxidation of dilute alloys10.1016/j.jallcom.2013.03.130 ↗
6. The effect of calcium additions on the oxidation behavior in magnesium alloys10.1016/S1359-6462(00)00344-4 ↗
7. Flame-resistant Ca-containing AZ31 magnesium alloy sheets with good mechanical properties fabricated by a combination of strip casting and high-ratio differential speed rolling methods10.1007/s12540-015-4338-5 ↗
8. The effect of 0.5 wt% Ca addition on the hot compressive characteristics and processing maps of the cast and extruded Mg–3Al–1Zn alloys10.1016/j.jallcom.2015.10.193 ↗
9. Development of non-flammable high strength AZ91+Ca alloys via liquid forging and extrusion10.1016/j.matdes.2016.03.014 ↗
10. Study of Ca and Ce additions on different ignition resistance behavior of magnesium alloy10.4028/www.scientific.net/MSF.788.7 ↗
11. Key factor influencing the ignition resistance of magnesium alloys at elevated temperatures10.1016/j.scriptamat.2011.08.019 ↗
12. Flammability of Mg–X Binary alloys10.1002/adem.201200124 ↗
13. Enhancing overall static/dynamic/damping/ignition response of magnesium through the addition of lower amounts (<2%) of yttrium10.1016/j.jallcom.2016.07.324 ↗
14. Design and development of high-performance Eco-Mg alloys
15. Development of CaO added wrought Mg alloy for cleaner production, Magnes
16. Oxidation and Corrosion Behavior of Non-Flammable Magnesium Alloys Containing Ca and Y
17. Mechanical Properties and High-Temperature Oxidation Behavior of Mg-Al-Zn-Ca-Y Magnesium Alloys
18. Novel magnesium alloy containing Y, Gd and Ca with enhanced ignition temperature and mechanical properties for aviation applications
19. Novel Ultrafine-Grain Mg-Gd/Nd-Y-Ca Alloys with an Increased Ignition Temperature10.3390/ma16031299 ↗
20. Magnesium extrusion alloys: a review of developments and prospects10.1080/09506608.2017.1421439 ↗
21. Effect of different c/a ratio on the microstructure and mechanical properties in magnesium alloys processed by ECAP10.1016/j.actamat.2015.12.050 ↗
22. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
23. Advanced analysis of the deformation mechanisms in extruded magnesium alloys containing neodymium or yttrium10.1016/j.msea.2019.05.069 ↗
24. Texture Hardening Observed in Mg–Zn–Nd Alloy Processed by Equal-Channel Angular Pressing (ECAP10.3390/met10010035 ↗
25. The effect of Zr on dynamic recrystallisation during ECAP processing of Mg-Y-RE alloys10.1016/j.matchar.2021.111033 ↗
26. Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression10.1016/j.scriptamat.2011.05.027 ↗
27. Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys10.1016/j.matlet.2014.04.144 ↗
28. Mg–Gd–Y system phase diagram calculation and experimental clarification10.1016/j.jallcom.2006.10.125 ↗
29. Exceptional mechanical properties of ultra-fine grain Mg-4Y–3RE alloy processed by ECAP10.1016/j.msea.2017.09.106 ↗
30. Effects of extrusion speed on the formation of bimodal-grained structure and mechanical properties of a Mg-Gd-based alloy10.1016/j.matchar.2022.111952 ↗
31. Exploring the mechanism of “Rare Earth” texture evolution in a lean Mg–Zn–Ca alloy10.1038/s41598-019-43415-z ↗
32. Correlation between dynamic recrystallisation and formation of rare earth texture in a Mg-Zn-Gd magnesium alloy during extrusion10.1038/s41598-018-35170-4 ↗
33. Role of deformation mechanisms and grain growth in microstructure evolution during recrystallisation of Mg-Nd based alloys10.1016/j.scriptamat.2019.02.045 ↗
34. Influence of equal channel angular pressing routes on texture, microstructure and mechanical properties of extruded AX41 magnesium alloy10.1016/j.matchar.2016.11.044 ↗
35. Dependence of twinned volume fraction on loading mode and Schmid factor in randomly textured magnesium10.1016/j.actamat.2017.03.017 ↗
36. Calculation of schmid factors in magnesium: analysis of deformation behaviors10.1016/j.scriptamat.2012.05.042 ↗
37. Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation10.1016/j.actamat.2014.03.014 ↗
38. T.B. Massalski, H. Okamoto, Binary alloy phase diagrams, 2nd ed., The Materials Information Society, Materials Park, Ohio, 1990.
39. Flammability and the oxidation kinetics of the magnesium alloys AZ31, WE43, and ZE1010.1016/j.corsci.2015.07.020 ↗
40. The pilling-bedworth ratio of oxides formed from the precipitated phases in magnesium alloys10.3389/fmats.2021.761052 ↗
41. In vitro corrosion of as-extruded Mg–Ca alloys—The influence of Ca concentration10.1016/j.corsci.2015.03.018 ↗
42. WE43 magnesium alloy - material for challenging applications, Kov
43. Oxidation behavior and incombustibility of molten Mg-Zn-Y alloys with Ca and Be addition10.1016/j.corsci.2018.12.037 ↗
44. Development of Mg–Zn–Y–Ca alloys containing icosahedral quasicrystal phase through trace addition of Y10.1557/jmr.2018.267 ↗
45. Development of non-flammable high strength extruded Mg-Al-Ca-Mn alloys with high Ca/Al ratio10.1016/j.jmst.2018.03.019 ↗
46. Ignition-proof properties of a high-strength Mg-Gd-Ag-Zr alloy10.1007/s12204-012-1338-1 ↗
47. Microstructure evolution and mechanical properties of an ultra-high strength casting Mg–15.6Gd–1.8Ag–0.4Zr alloy10.1016/j.jallcom.2014.07.028 ↗
48. Y. Kawamura, Flame-resistant Magnesium Alloys with High Strength, in: Proc. Seventh Trienn. Int. Fire Cabin Saf. Res. Conf., Philadelphia, 2013.
49. Effects of Ca and Sr additions on microstructure, mechanical properties, and ignition temperature of hot-rolled Mg–Zn alloy10.1016/j.msea.2019.138474 ↗
50. Effect of be addition on the oxidation behavior of Mg−Ca alloys at elevated temperature10.1007/BF03027357 ↗
51. Development of biodegradable Mg–Ca alloy sheets with enhanced strength and corrosion properties through the refinement and uniform dispersion of the Mg2Ca phase by high-ratio differential speed rolling10.1016/j.actbio.2014.09.029 ↗