journal article·2023-10

High anodic-efficiency and energy-density magnesium-air battery with modified AZ31 anode

Danya Huang, Tong Bu, Guang-Ling Song, Tao Ying, Yuan Yuan, Dajiang Zheng, Fuyong Cao

Publisher page

Abstract

This work investigates the performance of magnesium (Mg) - air battery with modified AZ31 anode, designated as AZ31M. It successfully achieves a high anodic efficiency of 73% with the energy density of 1692 mWh g −1 and capacity of 1582 mAh g −1 at 1 mA cm −2 in 3.5% NaCl. These battery parameters are higher than those reported for most Mg anodes. The addition of the cost-effective La, Ce and Ca refines the bulk Mg 17Al 12 in AZ31 into small Mg 17Al 12, Al 2Ca and Al 2 (Ca, RE), leading to a uniform discharge with slight galvanic corrosion and low anode delamination effect. The AZ31M anode is a potential candidate Mg anode for wide application of Mg-air battery.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Defect-rich graphene skin modified carbon felt as a highly enhanced electrode for vanadium redox flow batteries10.1016/j.jpowsour.2022.232443 ↗
2. On the electrocatalytically active sites in graphene-based vanadium redox flow batteries10.1016/j.carbon.2022.10.004 ↗
3. Reduced graphene oxide nanofluidic electrolyte with improved electrochemical properties for vanadium flow batteries10.1016/j.est.2022.104133 ↗
4. Influence of heat treatment on the discharge performance of Mg-Al and Mg-Zn alloys as anodes for the Mg-air battery10.1016/j.cej.2021.133797 ↗
5. Magnesium-air batteries: from principle to application,Mater
6. High-energy-capacity metal-air battery based on a magnetron-sputtered Mg-Al anode10.1016/j.jpowsour.2021.230874 ↗
7. Discharge behavior and mechanism of solid-solution-treated alloy anodes for magnesium-air batteries10.1021/acsaem.2c01303 ↗
8. Achieving ultrahigh anodic efficiency via single-phase design of Mg–Zn alloy anode for Mg–Air batteries10.1021/acsami.1c18913 ↗
9. The discharge performance of Mg-3In-xCa alloy anodes for Mg-Air batteries10.3390/coatings12040428 ↗
10. Effect of yttrium and calcium additions on electrochemical behaviors and discharge performance of AZ80 anodes for Mg-air battery
11. Discharge performance of Mg-Al-Pb-La anode for Mg-air battery10.1016/S1003-6326(18)64872-1 ↗
12. The quasicrystal of Mg–Zn–Y on discharge and electrochemical behaviors as the anode for Mg-air battery10.1016/j.jpowsour.2020.227807 ↗
13. Discharge properties of low-alloyed Mg–Bi–Ca alloys as anode materials for Mg–air batteries: Influence of Ca alloying10.1016/j.jallcom.2020.153779 ↗
14. Discharge behavior of Mg–Sn–Zn–Ag alloys with different Sn contents as anodes for Mg-air batteries10.1149/1945-7111/ab6284 ↗
15. Performance of Mg–14Li–1Al–0.1Ce as anode for Mg-air battery10.1016/j.jpowsour.2010.07.097 ↗
16. Electrochemical performance of Mg-3Al modified with Ga, In and Sn as anodes for Mg-Air battery10.1149/2.0371607jes ↗
17. A corrosion resistant die-cast Mg-9Al-1Zn anode with superior discharge performance for Mg-air battery10.1016/j.matdes.2020.108931 ↗
18. Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–RE alloys: RE = Ce, La, Nd, Y, Gd10.1016/j.corsci.2013.06.032 ↗
19. Microstructure and discharge performance of Mg-La alloys as the anodes for primary magnesium-air batteries10.1016/j.jallcom.2022.165803 ↗
20. Towards development of a high-strength stainless Mg alloy with Al-assisted growth of passive film10.1038/s41467-022-33480-w ↗
21. The corrosion of pure Mg accelerated by haze pollutant ammonium sulphate10.1016/j.corsci.2019.01.042 ↗
22. Film breakdown and nano-porous Mg(OH)2 formation from corrosion of magnesium alloys in salt solutions10.1149/2.0171504jes ↗
23. Approaching “stainless magnesium” by Ca micro-alloying10.1039/D0MH01380C ↗
24. alloy with no hydrogen evolution during dissolution
25. Influence of heat treatment on corrosion behavior of hot rolled Mg5Gd alloys10.1016/S1003-6326(21)65551-6 ↗
26. Influence of casting porosity on the corrosion behaviour of Mg0.1Si10.1016/j.corsci.2015.02.002 ↗
27. Corrosion behaviour and discharge properties of extruded Mg-Zn-Ca anodes for primary Mg-air batteries10.1007/s11581-022-04545-z ↗
28. Effect of rolling deformation on corrosion and discharge behavior of AZ91 magnesium alloy10.1002/adem.202200890 ↗
29. Effects of Gd and Nd on microstructure, corrosion behavior, and electrochemical performance of Mg-Y-based anodes for magnesium air batteries10.1007/s10800-022-01721-x ↗
30. Effect of multi-pass rolling on the performance of AZ31 magnesium alloy anode in Mg-Air battery
31. Influence of Ba micro-alloying on electrochemical and discharge behaviors of Mg-Al anodes for mg-air primary battery10.1002/er.8354 ↗
32. G.-L. Song, 2010. Theoretical, experimental and computer simulated galvanic current and corrosion damage of Mg alloys, 218th Electrochemical Society Conference, Las Vegas, Oct. 2010.10.1149/MA2010-02/16/1272 ↗
33. Designing strategy for corrosion-resistant Mg alloys based on film-free and film-covered models
34. Lu · 2015