Double perovskite structured Ca2MgWO6:Sm3+ nanophosphor: Tailored for future-generation WLEDs and dosimetry applications
Source abstract
Abstract
In fast-growing technologies, the development of innovative materials which can be used in multiple applications to fulfill the present necessary needs is highly motivated. Hence, in the present work, amber red-emitting double perovskite structured Sm 3+ ions-doped Ca 2MgWO 6 nanophosphors were synthesized via the solution combustion route. The structural studies confirm the monoclinic crystal phase of the prepared nanophosphors. The energy band gap of the prepared nanophosphors was estimated and found to be ∼ 3.86 – 3.97 eV. The photoluminescence emission spectra showcase three intense and sharp peaks centered at ∼ 570, 603, and 645 nm, which ascribed to the 4G 5/2 → 6H 5/2, 4G 5/2 → 6H 7/2 and 4G 5/2 → 6H 9/2 transitions of Sm 3+ ions, respectively. The photometric properties of the nanophosphors revealed amber-red region emission with ∼ 99.9% of chromatic purity. Thermoluminescence glow curves of the synthesized nanophosphors after irradiation of 10 KGy doses of γ-rays exhibit clear distinctive peaks at ∼ 140, 232, and 264 °C, which ascribed to increased luminescent trapping levels and defect population. The thermoluminescence linear response of the Ca 2MgWO 6:Sm 3+ (3 mol%) nanophosphors within a wide range of 0.1–10 KGy of γ- ray doses are noticed. The various kinetic and trapping parameters were estimated via the computerized glow curve deconvolution method. The aforementioned results revealed that the prepared nanophosphors can be used for both future-generation white light-emitting diodes and dosimetry applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Perovskite Materials and Applications · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Assessment of light emitting diodes technology for general lighting: a critical review10.1016/j.rser.2016.11.002 ↗
2. U.S. Department of Energy. Solid-State Lighting R&D Opportunities; US DoE, 2019.
3. Recent prospects on phosphor-converted LEDs for lighting, displays, phototherapy, and indoor farming10.1016/j.jlumin.2021.118167 ↗
4. Evolutionary generation of phosphor materials and their progress in future applications for light-emitting diodes10.1021/acs.chemrev.1c00952 ↗
5. Recent prospects on phosphor-converted LEDs for lighting, displays, phototherapy, and indoor farming10.1016/j.jlumin.2021.118167 ↗
6. Potential substitutes for critical materials in white LEDs: Technological challenges and market opportunities10.1016/j.rser.2021.110869 ↗
7. A review on the advancements in phosphor-converted light emitting diodes (pc-LEDs): Phosphor synthesis, device fabrication and characterization10.1016/j.pmatsci.2019.100622 ↗
8. Thermoluminescence investigations of Ca2Al2SiO7:Dy3+ phosphor for gamma dosimetry applications10.1016/j.matchemphys.2022.125872 ↗
9. Photoluminescence and thermoluminescence analysis of Zn2SiO4:Dy3+ nanophosphor10.1016/j.jlumin.2021.118060 ↗
10. M. Ranogajec-Komor, G. Klemic, I. Uray, Thermoluminescence Dosimetry in Environmental Monitoring, (2001).
11. Thermoluminescent dose measurements on-board Salyut type orbital stations10.1016/0273-1177(84)90227-8 ↗
12. Thermoluminescence analysis for detection of irradiated food—luminescence characteristics of minerals for different types of radiation and radiation doses10.1006/fstl.2000.0683 ↗
13. Development of LiMgBO3:Tb3+ as a new generation material for thermoluminescence based personnel neutron dosimetry10.1039/D0MA00737D ↗
14. Thermoluminescence theory and analysis: advances and impact on applications10.1016/B978-0-12-409547-2.12096-7 ↗
15. Eu-Doped BaF2 Nanoparticles for Bioimaging Applications10.1021/acsanm.8b02180 ↗
16. Exploring stable thermoluminescence signal in natural Barite (BaSO4) for retrospective dosimetry10.1016/j.apradiso.2015.08.035 ↗
17. Structural and analyses of thermoluminescence glow curves in Sm doped SrGd2O4
18. Synthesis, energy transfer and luminescence properties of Ca2MgWO6:Sm3+, Bi3+ phosphor10.1016/j.materresbull.2016.04.023 ↗
19. A double perovskite Ca2MgWO6:Bi3+ yellow-emitting phosphor: synthesis and luminescence properties10.1016/j.jlumin.2016.09.046 ↗
20. Synthesis of orange emitting Sm3+ doped sodium calcium silicate phosphor by sol-gel method for photonic device applications10.1016/j.ceramint.2020.04.224 ↗
21. Daruka Prasad, Effective fingerprint recognition technique using doped yttrium aluminate nano phosphor material10.1016/j.jcis.2015.11.025 ↗
22. An abnormal yellow emission and temperature-sensitive properties for perovskite-type Ca2MgWO6 phosphor via cation substitution and energy transfer10.1016/j.jlumin.2019.116588 ↗
23. A three-mode self-referenced optical thermometry based on up-conversion luminescence of Ca2MgWO6:Er3+,Yb3+ phosphors10.1016/j.cej.2020.127470 ↗
24. Shape controllable ultrasound assisted fabrication of CaZrO3:Dy3+ hierarchical structures for display, dosimetry and advanced forensic applications10.1016/j.jphotochem.2019.112248 ↗
25. Dopant distribution and influence of sonication temperature on the pure red light emission of mixed oxide phosphor for solid state lighting10.1016/j.ultsonch.2015.07.003 ↗
26. Tunable photoluminescence and energy transfer of Eu3+, Ho3+-doped Ca0.05Y1.93−xO2 nanophosphors for warm white LEDs applications10.1038/s41598-022-09630-x ↗
27. Hydrothermal synthesis and characterization of WO3 nanostructures: Effect of reaction time10.1088/2053-1591/ab66fc ↗
28. Facile design of a WO3 nanorod-decorated graphene oxide 1D–2D nanocatalyst for the synthesis of quinoline and its derivatives10.1039/D1NJ05681F ↗
29. The effect of humic acid on the stability and aggregation kinetics of WO3 nanoparticles10.1080/02726351.2017.1302536 ↗
30. Enhanced visible light photocatalytic activity of pristine and silver (Ag) doped WO3 nanostructured thin films
31. Hydrothermal synthesis and optical properties of hexagonal tungsten oxide nanocrystals assisted by ammonium tartrate10.1002/pssa.201127456 ↗
32. Preparation and characterization of WO3 bonded imidazolium sulfonic acid chloride as a novel and green ionic liquid catalyst for the synthesis of adipic acid10.1039/C6RA16098K ↗
33. Luminescence properties of Sm3+ doped LaP3O9 phosphors10.1016/j.ijleo.2021.167264 ↗
34. Blue light emitting ceramic nano-pigments of Tm3+ doped YAlO3: Applications in latent finger print, anti-counterfeiting and porcelain stoneware10.1016/j.dyepig.2016.02.015 ↗
35. States in the gap10.1016/0022-3093(72)90194-9 ↗
36. Defect correlated fluorescent quenching and electron phonon coupling in the spectral transition of Eu3+ in CaTiO3 for red emission in display application10.1063/1.4876316 ↗
37. Probing into multifunctional deep orange-red emitting Sm3+-activated zincate based nanomaterials for WLED applications10.1016/j.cplett.2021.138743 ↗
38. Combustion derived color tunable Sm3+ activated BaLaAlO4 nanocrystals for various innovative solid state illuminants10.1016/j.cplett.2020.137937 ↗
39. Cr3+ and Nd3+ co-activated garnet phosphor for NIR super broadband pc-LED application10.1016/j.materresbull.2022.111797 ↗
40. Na2CaSn2Ge3O12: A novel host lattice for Sm3+-doped long-persistent phosphorescence materials emitting reddish orange light10.1021/ic401262w ↗
41. Sm3+ doped Bi4MgO4(PO4)2:crystal and optoelectronic investigation of the solution combustion derived bright orange emanating novel nanophosphor for SSLs10.1016/j.matchemphys.2021.125389 ↗
42. Achieving orange red emission with high color purity from novel perovskite based Sr9Al6O18:Sm3+ nano-cubes for advanced optoelectronic applications10.1016/j.ceramint.2020.10.125 ↗
43. Spectroscopic and photoluminescence characteristics of Sm3+ doped calcium aluminozincate phosphor for applications in w-LED10.1016/j.ceramint.2017.02.129 ↗
44. Ultrasound assisted sonochemically engineered effective red luminescent labeling agent for high resolution visualization of latent fingerprints10.1016/j.materresbull.2017.09.059 ↗
45. Enhanced luminescence through ion-doping-induced higher energy phonons in GdTaO4: Eu3+ phosphor10.1063/1.3079413 ↗
46. Effects of doping concentration on thermoluminescence parameters of CaAl2O4:Re3+ (Re3+ = Dy3+, Sm3+, Tm3+) prepared by combustion method10.1016/j.radphyschem.2021.109631 ↗
47. Sm3+ doped tetragonal lanthanum molybdate: a novel host sensitized reddish orange emitting nanophosphor10.1016/j.jlumin.2019.03.045 ↗
48. Theory of concentration quenching in inorganic phosphors10.1063/1.1740265 ↗
49. Energy transfer in oxidic phosphors10.1016/0375-9601(68)90486-6 ↗
50. A theory of sensitized luminescence in solids10.1063/1.1699044 ↗
51. Structural and optical characterization of NaBi1−x(WO4)2: X Sm3+ phosphors for reddish orange light emitting applications10.1016/j.matlet.2021.129864 ↗
52. Structural and luminescence characterization of thermally stable orange-red emitting LiSrP3O9:Sm3+ phosphor to fill the amber gap in WLEDs10.1016/j.displa.2022.102302 ↗
53. Correlated color temperature as an explicit function of chromaticity coordinates10.1002/col.5080170211 ↗
54. Fabrication of flux supported SrTiO3:Eu3+ fluorescent powders: new prospective of dual mode, ink-free data security applications
55. NUV light-induced visible green emissions of Erbium-doped hierarchical Bi2Zr2O7 structures10.1016/j.optmat.2019.109237 ↗
56. Surface adaptation prompted enhanced photo and thermoluminescence properties of Dy3+ doped wollastonite nanophosphor10.1016/j.matchemphys.2020.123070 ↗
57. Thermoluminescence glow-curve deconvolution functions for first, second and general orders of kinetics10.1088/0022-3727/31/19/037 ↗