journal article·2023-12

Effect of Ce content on precipitation behavior in S31254 super austenitic stainless steel

Zhensen Guo, Yuping Li, Jinyao Ma, Xiaohong Liang, Huabing Li, Shucai Zhang, Peide Han

Publisher page

Abstract

The precipitation of Cr- and Mo-rich σ phases will seriously deteriorate the corrosion resistance and mechanical property of super austenitic stainless steel S31254. The precipitation of σ phase in S31254 containing B and Ce can be effectively inhibited by heat treatment to regulate trace elements. In this study, slow cooling combined low-temperature diffusion treatment (SCLDT) was adopted in S31254 containing B and Ce. Furthermore, the role of Ce was explored by comparing the precipitation behavior of samples with different Ce content. The results show that this new heat treatment strategy can better exert the inhibition effect of B and Ce on the precipitation of σ phase, and the inhibition effect is more obvious when the content of Ce is higher. It was found that the distribution of elements in the adjacent area of Ce at the GBs was almost the same as that in the matrix, which indicated that Ce could inhibit the formation of the precipitates along the GBs, and thus resulting in the precipitates distributed discontinuously. Besides, the B element was soluble in Mo-rich precipitates, and the B-containing precipitates was distributed in serrated pattern at GBs. In the 50Ce samples, serrated precipitates are more likely to form at the GBs, and the amount of precipitates was significantly reduced and discontinuities increased. Due to the homogeneous distribution of Cr in the serrated precipitates and their adjacent matrix zones, the phase interface has better resistance to intergranular corrosion.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Crevice corrosion behaviour of superaustenitic stainless steels: dynamic electrochemical impedance spectroscopy and atomic force microscopy studies10.1016/j.corsci.2008.11.008 ↗
2. Ageing of forged superaustenitic stainless steel: precipitate phases and mechanical properties10.1016/j.msea.2011.12.048 ↗
3. Hot working characteristic of superaustenitic stainless steel 254SMO10.1007/s40195-014-0047-1 ↗
4. Effect of solution treatment on the microstructure and performance of S31254 super austenitic stainless steel10.1002/srin.201900041 ↗
5. Microstructural evolution and stability of coarse-grained S31254 super austenitic stainless steel during hot deformation10.3390/met12081319 ↗
6. Characterization of the passive properties of 254SMO stainless steel in simulated desulfurized flue gas condensates by electrochemical analysis, XPS and ToF-SIMS10.1016/j.corsci.2019.108405 ↗
7. Weld metal phase transformation of as welded 6Mo superaustenitic stainless steel after cross-weld fatigue10.1179/136217110X12731414739673 ↗
8. Elucidating the passivation kinetics and surface film chemistry of 254SMO stainless steel for chimney construction in simulated desulfurized flue gas condensates10.1016/j.conbuildmat.2021.122905 ↗
9. Precipitation behavior and phase transformation of hyper duplex stainless steel UNS S32707 at nose temperature10.1016/j.matchar.2017.04.018 ↗
10. Effects of Cr and Mo on precipitation behavior and associated intergranular corrosion susceptibility of superaustenitic stainless steel S3265410.1016/j.matchar.2019.04.010 ↗
11. Phase transformations and mechanical properties in heat treated superaustenitic stainless steels10.1016/j.msea.2012.10.066 ↗
12. Comparative study of precipitation effects during aging in superaustenitic and superferritic stainless steels10.1179/026708310X12712410311938 ↗
13. Pitting and crevice corrosion of superaustenitic stainless steels10.1002/maco.200303746 ↗
14. The aging precipitation behavior of 20Cr-24Ni-6Mo super-austenitic stainless steel processed by conventional casting and twin-roll strip casting10.1016/j.matchar.2018.10.015 ↗
15. Microstructure evolution and strain-dependent constitutive modeling to predict the flow behavior of 20Cr–24Ni–6Mo super-austenitic stainless steel during hot deformation10.1007/s40195-017-0657-5 ↗
16. High-temperature creep property deterioration of the alumina-forming austenitic steel: effect of σ phase10.1016/j.msea.2022.143126 ↗
17. Hot deformation and optimization of process parameters of an as-cast 6Mo superaustenitic stainless steel: a study with processing map10.1016/j.matdes.2013.07.065 ↗
18. Effect of shielding gases on microstructure and mechanical properties of super austenitic stainless steel by hybrid welding10.1016/j.matdes.2011.06.065 ↗
19. Influence of N on precipitation behavior, associated corrosion and mechanical properties of super austenitic stainless steel S3265410.1016/j.jmst.2019.10.011 ↗
20. On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting10.1016/j.corsci.2019.108189 ↗
21. Influence of Cr, C and Ni on intergranular segregation and precipitation in Ti-stabilized stainless steels10.1016/j.scriptamat.2010.05.002 ↗
22. Precipitation behavior of the sigma phase with Ni and Mn content variations in superaustenitic stainless steel weld metal10.1016/j.matchar.2018.07.006 ↗
23. Precipitation during aging in N-containing austenitic stainless steels10.1016/j.matchar.2009.01.015 ↗
24. Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy10.1016/j.jmst.2020.02.079 ↗
25. Atomic-scale study on segregation behavior at austenite grain boundaries in boron- and molybdenum-added steels10.1016/j.actamat.2017.05.021 ↗
26. Beneficial effect of B segregation on creep cavitation in a type 347 austenitic stainless steel10.1016/j.scriptamat.2004.11.016 ↗
27. Corrosion resistance and passivation behavior of B-containing S31254 stainless steel in a low pH medium10.20964/2019.11.40 ↗
28. Effect of boron on dissolution and repairing behavior of passive film on S31254 super-austenitic stainless steel immersed in H2SO4 solution10.1007/s42243-021-00693-0 ↗
29. Effect of boron addition on the precipitation behavior of S3125410.3390/met8070497 ↗
30. Impact of boron addition on the hot deformation behavior and microstructure evolution of S3125410.1016/j.matlet.2022.131971 ↗
31. Influence mechanism of boron segregation on the microstructure evolution and hot ductility of super austenitic stainless steel S3265410.1016/j.jmst.2021.11.005 ↗
32. Correlation between evolution of inclusions and pitting corrosion in 304 stainless steel with yttrium addition10.1038/s41598-018-23273-x ↗
33. Influence of lanthanum element on tellurium induced embrittlement of Ni-16Mo-7Cr alloy10.1016/j.corsci.2022.110360 ↗
34. The influence of Ce micro-alloying on the precipitation of intermetallic sigma phase during solidification of super-austenitic stainless steels10.1016/j.jallcom.2019.152418 ↗
35. Effect of Ce addition on secondary phase transformation and mechanical properties of 27Cr–7Ni hyper duplex stainless steels10.1016/j.msea.2013.02.044 ↗
36. On the effect of boron on grain boundary character in a new polycrystalline superalloy10.1016/j.actamat.2015.10.006 ↗
37. Solute segregation on Σ3 and random grain boundaries in type 316L stainless steel10.1016/j.msea.2013.04.048 ↗
38. Three-dimensional atom probe analysis of boron segregation at austenite grain boundary in a low carbon steel - Effects of boundary misorientation and quenching temperature10.1016/j.scriptamat.2018.05.046 ↗
39. A grain boundary characterization study of boron segregation and carbide precipitation in alloy 304 austenitic stainless steel10.1016/j.scriptamat.2005.11.055 ↗
40. Grain boundary co-segregation of B and Ce hindering the precipitates of S31254 super austenitic stainless steel10.1016/j.jmrt.2023.03.135 ↗
41. Influence of N on precipitation behavior and transformation kinetics of super austenitic stainless steels after isothermal ageing at 900 °C10.1016/j.jmrt.2022.06.111 ↗
42. The mechanism on the B addition to regulate phase precipitation and improve intergranular corrosion resistance in UNS S31254 superaustenitic stainless steels10.1149/2.1361915jes ↗
43. Precipitation and transformation of sigma phase in a selective laser melted high-chromium superalloy subjected to heat treatment10.1016/j.micron.2021.103113 ↗
44. Effects of B segregation on Mo-rich phase precipitation in S31254 super-austenitic stainless steels: experimental and first-principles study10.1088/1674-1056/ac744a ↗
45. Effect of B and Ce on the grain boundary segregation of Mo-rich phases in super-austenitic stainless steels10.1007/s00339-022-05993-0 ↗
46. Improved corrosion resistance of super austenite stainless steel by B-induced nucleation of Laves phase10.1016/j.corsci.2023.110974 ↗
47. A study on the mechanism of serrated grain boundary formation in an austenitic stainless steel10.1016/j.matchemphys.2010.12.025 ↗
48. Grain boundary precipitation behavior in Re-containing nickel-based directionally solidified superalloys with carbon and boron additions10.1016/j.vacuum.2020.109483 ↗
49. Detection of susceptibility to intergranular corrosion of aged super austenitic stainless steel S32654 by a modified electrochemical potentiokinetic reactivation method10.1016/j.jallcom.2016.11.342 ↗