journal article·2025-04Open access

Effects of different Al contents on mechanical properties and high temperature oxidation resistance of AlxCoCr0.6NiV0.6 high entropy alloy

Da Wu, Bo Li, Yuzhi Shi, Xiaohu Hou, Cong Li, Yimin Gao, Pucun Bai, Yao Liu, Chenyu Liang

Abstract

High-entropy alloys with a single-phase FCC structure are widely employed as structural materials due to their excellent ductility and plasticity. Nevertheless, the strength and oxidation resistance of single-phase FCC alloys remain inadequate. Conventional methods for enhancing strength often compromise plasticity, rendering them unsuitable for engineering applications. This study presents a strategy for the preparation of CoCrNi-based AlxCoCr 0.6 NiV 0.6 alloys, characterized by unequal atomic ratios and high entropy, incorporating aluminum and vanadium. Short-range order was observed in each alloy composition, varying in size and crystal plane families. At an aluminum content of x = 0.85, both FCC and BCC dual phases were present in the alloy. The heterogeneous structure and dual-phase presence significantly enhanced the strength and high-temperature oxidation resistance of the high-entropy alloy. The yield strength of the high-entropy alloy increased from 235 MPa to 974 MPa, while the oxide layer thickness decreased from 37.5 μm to 8.3 μm, representing a reduction of 77 %. This study provides a method for adjusting the cross-scale heterostructures in high-entropy alloys (HEAs) and guides the design of CoCrNi-based HEAs with high strength, high ductility, and excellent antioxidant properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Oxidation behavior of TiNbMoAlSix refractory high entropy alloy at 1000℃10.1016/j.corsci.2022.110504 ↗
2. Enhanced oxidation resistance of MoTaTiCrAl high entropy alloys by removal of Al10.1007/s40843-020-1332-2 ↗
3. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
4. High entropy alloys: Key issues under passionate debate10.1016/j.scriptamat.2020.07.010 ↗
5. Hydrogen resistance of a 1 GPa strong equiatomic CoCrNi medium entropy alloy10.1016/j.corsci.2020.108510 ↗
6. Review on the preparation methods and strengthening mechanisms of medium-entropy alloys with CoCrNi as the main focus10.1016/j.jmrt.2023.10.266 ↗
7. Development of a novel CoCrNi based eutectic high entropy alloy for a wide temperature range10.1016/j.msea.2023.145606 ↗
8. Nano-dispersion strengthened and twinning mediated CoCrNi medium entropy alloy with excellent strength and ductility prepared by laser powder bed fusion10.1016/j.jallcom.2024.176103 ↗
9. Remarkably high fracture toughness of HfNbTaTiZr refractory high-entropy alloy10.1016/j.jmst.2022.01.017 ↗
10. Partially recrystallized heterostructure via Mo doping endows CoCrNi medium-entropy alloy with exceptional strength and ductility10.1016/j.scriptamat.2024.116297 ↗
11. An investigation on the corrosion performance of Fe2CoCrNi0.5 based high entropy alloys10.1016/j.corsci.2022.110497 ↗
12. Microstructure, mechanical and electrochemical performance of spark plasma sintered CoCrNi medium-entropy alloy10.1016/j.jallcom.2024.176321 ↗
13. Effect of minor elements Al and Ti on dynamic deformation and fracture of CoCrNi-based medium-entropy alloys10.1016/j.msea.2023.145535 ↗
14. Strengthening of CoCrNi medium entropy alloy with Ti additions10.1016/j.intermet.2023.108072 ↗
15. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
16. Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition10.1016/j.jmst.2018.10.009 ↗
17. Effect of Al and Nb addition on the precipitation hardening and deformation mechanism of CoCrNi medium entropy alloy10.1016/j.jallcom.2024.174619 ↗
18. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
19. Effect of ZrC particle on microstructure and corrosion behavior of CoCrNi medium-entropy alloy fabricated by powder plasma arc cladding10.1016/j.jallcom.2024.176612 ↗
20. Additive manufacturing of oxide dispersion-strengthened CoCrNi medium-entropy alloy by in situ oxide synthesis10.1016/j.jallcom.2023.171340 ↗
21. Transforming microstructures and mechanical properties of (CoCrNi)93Al7Nd medium entropy alloy films by annealing10.1016/j.surfcoat.2023.130331 ↗
22. Modifying crystallinity and mechanical properties of (CoCrNi)95.8Ce4.2 medium entropy alloy films by post-annealing treatment10.1016/j.surfcoat.2023.129265 ↗
23. Evolution of microstructure and texture in Al-containing CoCrNi medium entropy alloys during severe warm rolling10.1016/j.matchar.2023.113546 ↗
24. Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation10.1016/j.msea.2021.140875 ↗
25. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
26. Prediction of chemical short-range order in high/medium-entropy alloys10.1016/j.jmst.2023.05.072 ↗
27. Ta-doping induces heterogeneous microstructures in CoCrNi medium-entropy alloy to achieve excellent strength-ductility combination10.1016/j.msea.2023.145600 ↗
28. Effects of Ta microalloying on the microstructure and mechanical properties of L12-strengthened CoCrFeNi-AlTi high-entropy alloys10.1016/j.msea.2023.145048 ↗
29. Microstructure and mechanical properties of L12-strengthened CoFeMnNiMo0.2Alx high-entropy alloys10.1016/j.ijrmhm.2023.106499 ↗
30. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
31. Gradient cell-structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
32. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a CoCrNi medium-entropy alloy10.1038/s41467-020-16085-z ↗
33. Design of D022 superlattice with superior strengthening effect in high entropy alloys10.1016/j.actamat.2019.01.048 ↗
34. γ′′ Phase transformation, precipitation hardening, hetero-deformation induced hardening and deformation mechanisms in a Nb-alloyed medium-entropy alloy10.1016/j.matdes.2022.111477 ↗
35. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
36. Pursuing ultrastrong and ductile medium entropy alloys via architecting nanoprecipitates-enhanced hierarchical heterostructure10.1016/j.actamat.2023.119492 ↗
37. Chemical short-range order dependence of micromechanical behavior in CoCrNi medium-entropy alloy studied by atomic simulations
38. Radiation-assisted chemical short-range order formation in high-entropy alloys10.1016/j.scriptamat.2022.114547 ↗
39. Effect of short-range ordering on crack propagation behavior of high-entropy alloys10.1016/j.jmst.2024.11.072 ↗
40. A unique two-stage strength-ductility match in low solid-solution hardening Ni-Cr alloys: decisive role of short range ordering10.1016/j.scriptamat.2019.11.049 ↗
41. Ductilization of 2.6-GPa alloys via short-rangeordered interfaces and supranano precipitates10.1126/science.adr4917 ↗
42. High-temperature oxidation behavior of carbon doped CoCrNi medium entropy alloy fabricated by laser powder bed fusion10.1016/j.jmrt.2024.12.202 ↗
43. High-temperature oxidation behavior of CoCrNi medium-entropy alloy10.1016/j.corsci.2020.108755 ↗
44. Strengthening and dynamic recrystallization mediated by Si-alloying in a refractory high entropy alloy10.1016/j.msea.2021.142480 ↗
45. Superior mechanical properties and multiple strengthening mechanisms of a V-alloyed FeMnCoCr high-entropy alloy10.1016/j.msea.2024.146614 ↗
46. Uncovering the origin of unique elemental distribution behaviors of vanadium in high entropy alloys10.1016/j.ijrmhm.2024.106715 ↗
47. Impact of vanadium (V) content on in-situ oxidation, high temperature mechanical strength and tribological properties of Al0.5CrFeNiVx high entropy alloys10.1016/j.triboint.2024.110375 ↗
48. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
49. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
50. Inhibiting cracking and improving strength for additive manufactured AlCoCrFeNi high entropy alloy via changing crystal structure from BCC-to-FCC
51. FCC-BCC phase transformation induced simultaneous enhancement of tensile strength and ductility at high strain rate in high-entropy alloy10.1016/j.ijplas.2023.103730 ↗
52. Characterization of chemical short-range order in VCoNi medium-entropy alloy processed by spark plasma sintering10.1016/j.scriptamat.2023.115463 ↗
53. Microstructure and mechanical properties of a hot-extruded Al-based composite reinforced with core–shell-structured Ti/Al3Ti10.1007/s12613-017-1536-9 ↗
54. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
55. Effect of bimodal grain size distribution on the strain hardening behavior of a medium-entropy alloy10.1007/s40195-020-01173-2 ↗
56. Multiple ceramic particles help to improve oxidation resistance of TiAl alloy10.1016/j.apsusc.2024.160457 ↗
57. Effect of Cr content on synergistic effect of Cr-Al during oxidation of high-entropy AlCoCrxNiTi alloys10.1016/j.corsci.2023.111690 ↗
58. Ultra-high temperature oxidation resistant refractory high entropy alloys fabricated by laser melting deposition: Al concentration regulation and oxidation mechanism10.1016/j.corsci.2023.111537 ↗
59. Oxidation mechanism of refractory high entropy alloys TaMoCrTiAl with varying Ta content10.1016/j.corsci.2021.109861 ↗
60. On the oxidation mechanism of refractory high entropy alloys10.1016/j.corsci.2019.108161 ↗
61. Simultaneously enhanced oxidation resistance and mechanical properties in a novel lightweight Ti2VZrNb0.5Al0.5 high-entropy alloy10.1007/s40843-022-2045-4 ↗
62. Oxidation and dissolution behavior of FeCrNiAl based high entropy alloy and alumina-forming austenitic steel exposed to lead-bismuth eutectic (LBE)10.1016/j.corsci.2023.111693 ↗