journal article·2022-04

Design of Nb-Ti-Fe hydrogen permeable alloys based on the ductile-to-brittle transition-hydrogen concentration region

Erhu Yan, Hao Wang, Wei Liu, Ping Zhao, Xiaoyu Ge, Renjun Huang, Jian Cheng, Yongjin Zou, Hailiang Chu, Huanzhi Zhang, Fen Xu, Lixian Sun

Publisher page

Abstract

Nb-based dual-phase alloys are one of the most promising candidates for hydrogen purification. To solve their brittle fracture in hydrogen-containing atmospheres, the ductile-to-brittle transition-hydrogen concentration (DBTC) is a significant reference index, and the dissolved hydrogen concentration should be controlled below the lower limit of the DBTC, i.e., 0.72 H/M (atomic hydrogen to metal ratio). In this study, hydrogen permeable Nb-Ti-Fe alloys were designed and developed by using the above DBTC concept. Four hyper-eutectic Nb-Ti-Fe alloy membranes were prepared, and their hydrogen solubility was systematically analyzed by corresponding pressure-composition isotherms (PCT curves). The results show that all these samples had a linear relationship between the hydrogen concentration and square root of the hydrogen pressure between 0.1 and 0.4 MPa, which is in accordance with the Sieverts’ law. The hydrogen solubility of the specimens containing the primary TiFe phase was lower than 0.72 H/M, but the alloys with the primary Nb phase had a value that was much higher. The latter was completely broken during the test, even if the feed hydrogen pressure was reduced to 0.15 MPa. Based on the above results and DBTC concept, novel insights into the design of Nb-Ti-Fe hydrogen permeable alloys were elucidated; that is, an improvement in both the hydrogen permeability and hydrogen embrittlement resistance can be attained by controlling the hydrogen solubility. Following this concept, a Nb 5Ti 58Fe 35Cu 2 alloy was successfully developed that exhibited a high permeability of 4.32 × 10 −8 mol H 2 m −1 s −1 Pa −0.5 at 673 K, which is 2.7 times than that of a pure Pd membrane under the same test conditions. The present work demonstrated the feasibility and applicability of the DBTC concept in the design of dual-phase Nb-Ti-Fe hydrogen permeable alloy membranes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Catalysts for Methane Reforming · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Nb-Pd-Ti BCC thin films for hydrogen separation10.1016/j.jallcom.2018.10.126 ↗
2. The influence of surface corrosion on microstructure and hydrogen permeability of Nb-Hf-Co dual-phase alloys
3. A novel Nb-based hydrogen purification membrane without catalytic palladium overlayer10.1016/j.jallcom.2021.160103 ↗
4. Effects of Mo alloying on the structure and hydrogen-permeation properties of Nb metal10.1016/j.jallcom.2018.01.076 ↗
5. The optimized composition and strong sustainability of hydrogen permeation of Nb30Ti35Co35 eutectic alloy membrane after 5 at% Fe substitution10.1016/j.ijhydene.2021.01.084 ↗
6. Hydrogen permeation characteristics of multi-phase Ni-Ti-Nb alloys10.1016/j.jallcom.2003.08.064 ↗
7. Design of hydrogen permeable Nb-Ni-Ti alloys by correlating the microstructures, solidification paths and hydrogen permeability10.1016/j.ijhydene.2013.12.060 ↗
8. Development of Nb-Ti-Co alloy for high-performance hydrogen separating membrane10.1016/j.memsci.2018.08.060 ↗
9. Microstructure and hydrogen permeability of Nb40Hf30Ni30 ternary alloy10.1016/j.ijhydene.2010.07.059 ↗
10. Effect of Hf/Ni ratio on microstructure and hydrogen permeation of Nb-Hf-Ni ternary alloys
11. High hydrogen permeability in the Nb-Zr-Ni eutectic alloy containing the primary body-centered-cubic (Nb, Zr) phase10.1063/1.2006985 ↗
12. Design of Nb-based multi-phase alloy membranes for high hydrogen permeability and suppressed hydrogen embrittlement10.1016/j.memsci.2019.117531 ↗
13. Changes in microstructure, ductility and hydrogen permeability of Nb-(Ti, Hf)Ni alloy membranes by the substitution of Ti by Hf10.1016/j.memsci.2015.03.002 ↗
14. Microstructural change-induced lowering of hydrogen permeability in eutectic Nb-TiNi alloy10.1016/j.memsci.2010.01.029 ↗
15. Design of (Nb, Mo)40Ti30Ni30 alloy membranes for combined enhancement of hydrogen permeability and embrittlement resistance10.1038/s41598-017-00335-0 ↗
16. Design of hydrogen separatinwg Nb-Ti-Fe membranes with high permeability and low cost10.1016/j.seppur.2020.117945 ↗
17. First-principle investigation of hydrogen solubility and diffusivity in transition metal-doped vanadium membranes and their mechanical properties10.1016/j.jallcom.2019.07.063 ↗
18. Rational design of Nb-based alloys for hydrogen separation: a first principles study10.1063/1.4790627 ↗
19. First-principles study of hydrogen behavior in vanadium-based binary alloy membranes for hydrogen separation10.1016/j.ijhydene.2017.07.056 ↗
20. Hydrogen storage properties of Mn and Cu for Fe substitution in TiFe0.9 intermetallic compound10.1016/j.jallcom.2020.156075 ↗
21. Nb-TiCo multiphase alloys: the significant impact of Ti/Co ratio on solidification path, microstructure and hydrogen permeability
22. The solubility and diffusivity of hydrogen in well-annealed and deformed iron10.1016/0001-6160(83)90192-X ↗
23. Hydrogen diffusivity of Nb56−xWxTi23Co21 alloys under non-dilute conditions and its analysis based on hydrogen chemical potential10.1016/j.jallcom.2019.05.324 ↗
24. Substitutional V-Pd alloys for the membranes permeable to hydrogen: hydrogen solubility at 150–400 °C10.1016/j.ijhydene.2014.09.122 ↗
25. Veolkl · 1978
26. Calculation of the enthalpy of metal hydride formation10.1016/0022-5088(87)90485-1 ↗
27. A quantitative description of recrystallization and grain growth in single phase bcc iron10.1016/1359-6454(95)00380-0 ↗
28. On the crystal structure of TiFe hydrides10.1016/0360-3199(80)90060-9 ↗
29. Accelerated diffusion of hydrogen along grain boundaries in nickel10.1016/1359-6454(95)00446-7 ↗
30. Grain boundary transport of hydrogen in nickel10.1016/0036-9748(82)90273-3 ↗
31. Effects of rolling and annealing on hydrogen permeability and crystal orientation in Nb-TiNi two-phase alloys10.1016/j.ijhydene.2019.07.021 ↗
32. Microstructure dependent hydrogen permeability in eutectic Nb30Ti35Co3510.1016/j.ijhydene.2016.05.238 ↗
33. Nb35Hf32.5Co32.5 dual-phase alloy: Hydrogen permeability degradation due to the microstructural changes caused by annealing10.1016/j.ijhydene.2021.02.046 ↗
34. Santos, Influence of microstructure in the hydrogen permeation in martensitic-ferritic stainless steel10.1016/j.ijhydene.2015.06.102 ↗
35. Kannan, Hydrogen permeation in nanostructured bainitic steel10.1007/s11661-016-3677-2 ↗
36. Enhancing hydrogen embrittlement resistance of lath martensite by introducing nano-films of interlath austenite10.1007/s11661-015-3009-y ↗
37. Effect of retained austenite stability and morphology on the hydrogen embrittlement susceptibility in quenching and partitioning treated steels10.1016/j.msea.2016.02.026 ↗
38. Grain size and grain-boundary effects on diffusion and trapping of hydrogen in pure nickel10.1016/j.actamat.2012.09.004 ↗
39. Hydrogen-induced intergranular failure in nickel revisited10.1016/j.actamat.2012.01.040 ↗
40. Grain-boundary engineering markedly reduces susceptibility to intergranular hydrogen embrittlement in metallic materials10.1016/j.actamat.2009.05.012 ↗
41. Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels10.1016/j.ijhydene.2018.04.241 ↗
42. Effects of deformation on hydrogen permeation in austenitic stainless steels10.1016/0001-6160(86)90123-9 ↗
43. Hydrogen trapping sites and hydrogen-induced cracking in high strength quenching & partitioning (Q&P) treated steel10.1016/j.ijhydene.2014.06.079 ↗
44. On a mechanism for enhanced hydrogen flux along grain boundaries in metals10.1016/j.actamat.2020.05.005 ↗
45. Hydrogen diffusion in ultrafine-grained iron with the body-centered cubic crystal structure10.1080/09500839.2017.1300702 ↗
46. Hydrogen permeation through deformed and heat-treated Armco pure iron10.1080/02670836.2017.1342015 ↗
47. Short-range order of H in the Nb-H solid solution10.1016/j.ijhydene.2013.11.080 ↗
48. V-W alloy membranes for hydrogen purification10.1016/j.jallcom.2010.09.161 ↗
49. Effects of tungsten addition on hydrogen absorption and permeation properties of Nb40Ti30Ni30 alloy10.1016/j.jallcom.2018.03.146 ↗
50. Analysis of W/Mo alloying on hydrogen permeation performance of dual phase Nb-Ti-Ni alloys based on hydrogen chemical potentials10.1016/j.memsci.2019.05.004 ↗
51. Development of Nb35Mo5Ti30Ni30 alloy membrane for hydrogen separation applications10.1016/j.memsci.2018.02.052 ↗
52. Hydrogen embrittlement of niobium-III. High temperature behavior10.1016/0001-6160(78)90089-5 ↗
53. Hydrogen embrittlement of Nb I – macroscopic behavior at low temperatures10.1016/0001-6160(77)90116-X ↗
54. Structures and mechanical properties of Nb-Mo-Co(Ru) solid solutions for hydrogen permeation10.1016/j.jallcom.2018.04.235 ↗
55. Effect of niobium on the microstructure, hydrogen embrittlement, and hydrogen permeability of NbxHf(1−x)/2Ni(1−x)/2 ternary alloys10.1016/j.ijhydene.2010.07.051 ↗
56. Hydrogen storage properties of Nb-Hf-Ni ternary alloys10.1016/j.ijhydene.2012.11.094 ↗
57. Development of dual-phase V90Fe5Al5/Cu alloys for enhanced malleability and sustainable hydrogen permeability10.1016/j.memsci.2019.117325 ↗