journal article·2015-11

Controlled substitution of S by Se in reactively sputtered CZTSSe thin films for solar cells

Om Pal Singh, N. Vijayan, K.N. Sood, B.P. Singh, V.N. Singh

Publisher page

Abstract

Abstract CZTSSe thin films are considered to be future of flexible thin film solar cell. Amount of S and Se in the CZTSSe thin films controls the band gap. Therefore, control over the concentration of S/Se is very important for enhancing the efficiency. CZTS thin films were deposited on SLG substrate by sequential reactive sputtering of metal targets. The films were annealed in Se atmosphere at 550 °C for 10–25 min in order to obtain CZTSSe thin films. Elemental, surface morphological, optical and structural properties of CZTSSe thin films have been investigated in detail. Optical band gap energy of CZTSSe thin films were in the range of 1.1–1.35 eV. XRD and Raman analysis were used to analyze the structure and phase purity of CZTSSe thin films. High intense peak at 27.9° in the XRD pattern corresponding to (112) plane was observed. High intensity of XRD peak corresponding to (112) direction revealed that the growth is oriented along (112) direction. Raman analysis also showed the presence of two peaks related to Se and S anions in CZTSSe thin films. In the Raman spectra of CZTSSe thin films; peaks corresponding to Se anions were observed at 190–206 cm−1 and peaks corresponding to S anions were observed at 329–338 cm−1. Elemental analysis results showed that S/Se ratio did not change much with increase in annealing time. To the best of our knowledge, this is the first report on the deposition of CZTSSe by sequential reactive sputtering of metal targets and controlled selenization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%
2. First Solar, Inc. sets thin-film solar cell efficiency record again, http://www.valuewalk.com/2014/08/first-solar-solar-cell-efficiency-record/08 Aug 2014.
3. Properties of Cu2ZnSn(SxSe1−x)4 thin films prepared by one-step sulfo-selenization of alloyed metal precursors10.1016/j.cap.2014.04.005 ↗
4. Development of thin film solar cell based on Cu2ZnSnS4 thin films10.1016/S0927-0248(00)00088-X ↗
5. Compositional dependence of structural and electronic properties of Cu2ZnSn(S,Se)4 alloys for thin film solar cells10.1103/PhysRevB.83.125201 ↗
6. Effect of annealing time on the composition, microstructure and band gap of copper zinc tin sulfide thin films10.5185/amlett.2015.6584 ↗
7. Effect of temperature on thermal expansion and anharmonicity in Cu2ZnSnS4 thin films grown by co-sputtering and sulfurization10.1016/j.matchemphys.2014.03.052 ↗
8. Green synthesis of wurtzite copper zinc tin sulfide nanocones for improved solar photovoltaic utilization10.1007/s13204-014-0302-9 ↗
9. Growth of CZTS thin films by cosputtering of metal targets and sulfurization in H2S
10. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
11. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
12. Improvement in the properties of CZTSSe thin films by selenizing single-step electrodeposited CZTS thin films10.1016/j.jallcom.2014.12.253 ↗
13. Fabrication of 7.2% Efficient CZTSSe solar cells using CZTS nano crystals10.1021/ja108427b ↗
14. Synthesis of quaternary chalcogenide nanocrystals: stannite cu2znxsnyse1+x+2y10.1021/ja909498c ↗
15. Diethylenetriamine assisted synthesis and characterization of stannite quaternary semiconductor Cu2ZnSnSe4 nanorods by self-assembly10.1016/j.jcrysgro.2013.04.026 ↗
16. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
17. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
18. Preparation and evaluation of Cu2ZnSnS4 thin films by sulfurization of E-B evaporated precursors10.1016/S0927-0248(97)00119-0 ↗
19. Cu2ZnSn(S,Se)4 solar cells processed by rapid thermal processing of stacked elemental layer precursors10.1016/j.tsf.2012.10.042 ↗
20. Phase-selective hydrothermal synthesis of Cu2ZnSnS4 nanocrystals: the effect of the sulphur precursor10.1039/C3CE42606H ↗
21. Cu2ZnSn(S1−xSex)4 thin films for photovoltaic applications: influence of the precursor stacking order on the selenization process10.1016/j.jallcom.2013.11.068 ↗
22. Characteristics of Cu2ZnSnSe4 and Cu2ZnSn(Se,S)4 absorber thin films prepared by post selenization and sequential sulfurization of co-evaporated Cu–Zn–Sn precursors10.1016/j.jallcom.2013.06.064 ↗
23. Preparation of Cu2ZnSnS4 thin films by sulfurization of stacked metallic layers10.1016/j.tsf.2008.09.058 ↗
24. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗
25. Growth of Cu2ZnSnS4 thin films using sulfurization of stacked metallic films10.1016/j.tsf.2010.03.058 ↗
26. Influence of selenization pressure on the growth of Cu2ZnSnSe4 films from stacked metallic layers10.1002/pssc.200982748 ↗
27. Preparation of Cu2ZnSnS4 thin films by sulfurizing stacked precursor thin films via successive ionic layer adsorption and reaction method10.1016/j.apsusc.2012.04.120 ↗
28. Improved performance of Ge-alloyed CZTGeSSe thin- film solar cells through control of elemental losses10.1002/pip.2442 ↗
29. Interplay between surface preparation and device performance in CZTSSe solar cells: effects of KCN and NH4OH etching10.1016/j.solmat.2015.01.006 ↗
30. Cu2ZnSnS4 solar cells prepared with sulphurized dc-sputtered stacked metallic precursors10.1016/j.tsf.2010.12.035 ↗
31. Preparation of Cu2ZnSnS4 thin films by sulfurizing stacked precursor thin films via successive ionic layer adsorption and reaction method10.1016/j.apsusc.2012.04.120 ↗
32. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1−x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
33. Morphological evolution and structural properties of Cu2ZnSn(S,Se)4 thin films deposited from single ceramic target by a one-step sputtering process and selenization without H2Se10.1016/j.jallcom.2015.04.103 ↗
34. The path towards a high performance solution processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
35. Single-step preparation and characterization of Cu2ZnSn(SxSe1−x)4 thin films deposited by pulsed laser deposition method10.1016/j.jallcom.2012.03.065 ↗
36. Band offsets and optical bowings of chalcopyrites and Zn-based II-VI alloys10.1063/1.359901 ↗
37. Hot-injection synthesis of monodispersed Cu2ZnSn(SxSe1−x)4 nanocrystals: tunable composition and optical properties10.1039/c2jm31901b ↗
38. DFT calculations study of structural, electronic, and optical properties of Cu2ZnSn(S1-xSex)4 alloys10.1016/j.jallcom.2014.08.213 ↗
39. Synthesis of homogeneously alloyed Cu2−x(Sy Se1−y) nanowire bundles with tunable compositions and band gaps10.1002/adfm.201000771 ↗
40. Electronic structure of ZnS, ZnSe, ZnTe, and their pseudo binary alloys10.1103/PhysRevB.36.3199 ↗
41. First-principles calculation of band offsets, optical bowings, and defects in CdS, CdSe, CdTe and their alloys10.1063/1.372014 ↗
42. Growth and characterization of Cu2ZnSn(SxSe1-x)4 alloys grown by the melting method10.1016/j.jcrysgro.2013.10.001 ↗
43. Cu2ZnSn(S,Se)4 kesterite solar cell with 5.1% efficiency using spray pyrolysis of aqueous precursor solution followed by selenization10.1016/j.solmat.2014.01.029 ↗
44. Photoluminescence and Raman study of Cu2ZnSn(SexS1−x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗