journal article·2018-09

A comparative study on the microstructural evolution in AM60 alloy processed by ECAP and MDF

A. Heczel, F. Akbaripanah, M.A. Salevati, R. Mahmudi, Á. Vida, J. Gubicza

Publisher page

Abstract

Abstract Extruded AM60 Mg alloy samples were processed by two different severe plastic deformation (SPD) techniques, equal-channel angular pressing (ECAP) and multi-directional forging (MDF) at 220 °C for 2, 4 and 6 passes. The evolutions of the microstructure during ECAP and MDF were compared. It was found that although the main trends were similar for the two processing methods, the changes in the microstructure were more pronounced for ECAP. This effect was explained by the higher imposed strain and the different loading conditions applied during ECAP, which resulted in a much larger dislocation density and precipitate fraction for 2 passes compared to MDF. Between 2 and 6 passes, the dislocation density decreased, while the diffraction domain size increased due to recovery/recrystallization. The present study demonstrates that for the two SPD-processing methods the microstructural evolutions do not coincide either as a function of the number of passes or the equivalent strain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Magnesium and its alloys applications in automotive industry10.1007/s00170-007-1279-2 ↗
2. Construction of extrusion limit diagram for AZ31 magnesium alloy by FE simulation10.1016/j.jmatprotec.2003.12.003 ↗
3. Magnesium: properties — applications — potential10.1016/S0921-5093(00)01351-4 ↗
4. Influence of equal channel angular pressing routes on texture, microstructure and mechanical properties of extruded AX41 magnesium alloy10.1016/j.matchar.2016.11.044 ↗
5. Influence of pressing temperature on microstructural development in equal-channel angular pressing10.1016/S0921-5093(00)00836-4 ↗
6. Deformation and fracture during equal channel angular pressing of AZ31 magnesium alloy10.1016/j.msea.2007.09.063 ↗
7. Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing10.1016/j.ijplas.2012.03.007 ↗
8. Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing10.1016/S1359-6454(97)00355-8 ↗
9. Microstructure and tensile property of the ECAPed pure magnesium10.1016/j.jallcom.2008.02.030 ↗
10. A two-step processing route for achieving a superplastic forming capability in dilute magnesium alloys10.1016/S1359-6462(02)00135-5 ↗
11. Microstructure stability of ultra-fine grained magnesium alloy AZ31 processed by extrusion and equal-channel angular pressing (EX–ECAP)10.1016/j.matchar.2014.05.013 ↗
12. Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing10.1016/j.matdes.2012.06.051 ↗
13. The microstructure, tensile, and shear deformation behavior of an AZ31 magnesium alloy after extrusion and equal channel angular pressing10.1016/j.matdes.2010.02.018 ↗
14. Fatigue properties of a fine-grained magnesium alloy produced by equal channel angular pressing10.1016/j.scriptamat.2004.11.007 ↗
15. ECAP effect on the micro-structure and mechanical properties of AM30 magnesium alloy10.1016/j.msea.2013.11.042 ↗
16. Microstructure, texture and mechanical properties in an as-cast AZ61 Mg alloy during multi-directional impact forging and subsequent heat treatment10.1016/j.matdes.2015.08.052 ↗
17. Influence of SiC nanoparticles addition on the microstructural evolution and mechanical properties of AZ91 alloy during isothermal multidirectional forging10.1016/j.matchar.2016.12.006 ↗
18. Multidirectional forging of AZ91 magnesium alloy and its effects on microstructures and mechanical properties10.1016/j.msea.2014.11.076 ↗
19. Multi-directional forging of AZ61Mg alloy under decreasing temperature conditions and improvement of its mechanical properties10.1016/j.msea.2011.05.050 ↗
20. Enhanced mechanical properties due to grain refinement and texture modification in an AZ61 Mg alloy processed by small strain impact forging10.1016/j.msea.2014.10.075 ↗
21. Microstructural evolution of Mg-7Al-2Sn Mg alloy during multi-directional impact forging10.1016/j.jma.2015.08.005 ↗
22. Enhanced mechanical property of AZ31B magnesium alloy processed by multi-directional forging method10.1016/j.matchar.2017.05.010 ↗
23. Enhanced microstructure homogeneity and mechanical properties of AZ31 magnesium alloy by repetitive upsetting10.1016/j.msea.2012.01.111 ↗
24. Microstructure, texture and mechanical properties of coarse-grained Mg–Gd–Y–Nd–Zr alloy processed by multidirectional forging10.1016/j.jallcom.2014.10.084 ↗
25. Microstructure and fatigue properties of the ultrafine-grained AM60 magnesium alloy processed by equal-channel angular pressing10.1016/j.msea.2008.03.057 ↗
26. Correlation between strength and microstructure of ball-milled Al–Mg alloys determined by X-ray diffraction10.1016/j.msea.2004.01.089 ↗
27. X-ray diffraction line broadening due to dislocations in non-cubic crystalline materials. III. Experimental results for plastically deformed zirconium10.1107/S0021889889001585 ↗
28. The evolution of non-basal dislocations as a function of deformation temperature in pure magnesium determined by X-ray diffraction10.1016/j.actamat.2004.02.034 ↗
29. 3D FEM simulations for the homogeneity of plastic deformation in Al–Cu alloys during ECAP10.1016/j.msea.2009.10.032 ↗
30. FE simulation and experimental investigation of ZK60 magnesium alloy with different radial diameters processed by equal channel angular pressing10.1016/j.msea.2011.12.057 ↗
31. An analysis on the deformation of pure copper during multi-pass equal channel angular extrusion10.1016/j.mspro.2014.07.320 ↗
32. Mechanical and microstructural characterisation of Al6082 ultra-fine grained alloy manufactured by ECAP combined with traditional forming processes10.4028/www.scientific.net/MSF.589.111 ↗
33. Production of ultrafine-grained titanium by industrial caliber rolling
34. Analysis of shear deformation scheme efficiency in plastic structure formation processes
35. Effect of severe plastic deformation on structure and properties of Al-Sc-Ta and Al-Sc-Ti alloys10.1186/s11671-017-1995-y ↗
36. The effect of severe plastic deformation on precipitation in supersaturated Al-Zn-Mg alloys10.1016/j.msea.2007.01.001 ↗
37. Gubicza · 2017
38. Principles of grain refinement in magnesium alloys processed by equal channel angular pressing10.1007/s10853-009-3725-z ↗
39. Modeling of continuous dynamic recrystallization in commercial purity aluminum10.1016/j.msea.2009.09.043 ↗
40. Quantitative analysis of grain refinement in titanium during equal channel angular pressing10.1016/j.scriptamat.2011.01.030 ↗
41. Microstructures and properties of copper processed by equal channel angular extrusion for 1-16 passes10.1016/j.actamat.2004.06.040 ↗
42. Correlation between microstructure and mechanical properties of severely deformed metals10.1016/j.jallcom.2008.07.200 ↗
43. A quantitative assessment of forest-hardening in f.c.c. metals10.1016/0001-6160(87)90186-6 ↗