journal article·2018-10

Protecting lithium anode with LiNO3/Al2O3/PVDF-coated separator for lithium-sulfur batteries

Yuepeng Guan, Anbang Wang, Shuai Liu, Qian Li, Weikun Wang, Yaqin Huang

Publisher page

Abstract

Abstract A modified separator with LiNO3/Al2O3/PVDF coating has been prepared to protect lithium anode and enhance the cycle performance of lithium-sulfur (Li-S) batteries. The functional coating directly contacted with lithium, and the LiNO3 absorbed in Al2O3 nano particles was released slowly, offering a durable protection to lithium. The initial discharge capacity of the cell assembled with the LiNO3/Al2O3/PVDF-coated separator is 1283 mAh·g−1 at 200 mA g−1, and after 100 cycles, the discharge capacity still remains at 712 mAh·g−1, which is higher than those of the cells assembled with Al2O3/PVDF-coated separator and routine separator.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Challenges and prospects of lithium-sulfur batteries10.1021/ar300179v ↗
2. Building better batteries10.1038/451652a ↗
3. Efficient storage mechanisms for building better supercapacitors10.1038/nenergy.2016.70 ↗
4. Smaller sulfur molecules promise better lithium−sulfur batteries10.1021/ja308170k ↗
5. Solvent-dictated lithium sulfur redox reactions: an operando UV-vis spectroscopic study10.1021/acs.jpclett.6b00228 ↗
6. A thermally conductive separator for stable Li metal anodes10.1021/acs.nanolett.5b02432 ↗
7. Metallic anodes for next generation secondary batteries10.1039/c3cs60177c ↗
8. Lithium-sulfur batteries: electrochemistry, materials, and prospects10.1002/anie.201304762 ↗
9. Bifunctional separator with a light-weight carbon-coating for dynamically and statically stable lithium-sulfur batteries10.1002/adfm.201400845 ↗
10. High-performance Li-S batteries with an ultra-lightweight MWCNT-coated separator10.1021/jz5006913 ↗
11. A flexible sulfur-graphene-polypropylene separator integrated electrode for advanced li-s batteries10.1002/adma.201404210 ↗
12. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
13. Building better lithium-sulfur batteries: from LiNO3 to solid oxide catalyst10.1038/srep33154 ↗
14. Characterization of the solid electrolyte interphase on lithium anode for preventing the shuttle mechanism in lithium–sulfur batteries10.1016/j.jpowsour.2013.08.041 ↗
15. On the surface chemical aspects of very high energy density, rechargeable Li–Sulfur batteries10.1149/1.3148721 ↗
16. A thermally conductive separator for stable li metal anodes10.1021/acs.nanolett.5b02432 ↗
17. Pretreatment of li metal anode with electrolyte additive for enhancing li cycleability10.1016/j.jpowsour.2005.03.007 ↗
18. Shuttle phenomenon – the irreversible oxidation mechanism of sulfur active material in Li–S battery10.1016/j.jpowsour.2013.01.132 ↗
19. Insights into Li-S battery cathode capacity fading mechanisms: irreversible oxidation of active mass during cycling10.1149/2.020211jes ↗
20. Synthesis of an Al2O3-coated polyimide nanofiber mat and its electrochemical characteristics as a separator for lithium ion batteries10.1016/j.jpowsour.2013.10.056 ↗
21. Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium–sulfur batteries10.1016/j.electacta.2012.07.118 ↗
22. Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer10.1038/ncomms2163 ↗
23. Advanced sulfur cathode enabled by highly crumpled nitrogen-doped graphene sheets for high-energy-density lithium-sulfur batteries10.1021/acs.nanolett.5b03217 ↗
24. A facile in situ sulfur deposition route to obtain carbon-wrapped sulfur composite cathodes for lithium-sulfur batteries10.1016/j.electacta.2012.06.002 ↗
25. A flexible 3D multifunctional MgO-decorated carbon Foam@CNTs hybrid as self-supported cathode for high-performance lithium-sulfur batteries10.1002/adfm.201702573 ↗
26. Investigations of lithium–sulfur batteries using electrochemical impedance spectroscopy10.1016/j.electacta.2013.02.101 ↗
27. A high-efficiency sulfur/carbon composite based on 3D graphene Nanosheet@Carbon nanotube matrix as cathode for lithium-sulfur battery
28. Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes10.1038/ncomms9058 ↗
29. Dendrite-Free lithium deposition induced by uniformly distribute lithium-ions fir efficient lithium metal batteries10.1002/adma.201506124 ↗
30. Dual-phase lithium metal anode containing a polysulfide-induced solid electrolyte interphase and nanostructured graphhene framework for lithium-sulfur batteries10.1021/acsnano.5b01990 ↗
31. High performance lithium-sulfur batteries: advances and challenges10.1039/C4TA02097A ↗
32. Interconnected hollow carbon nanospheres for stable lithium metal anodes10.1038/nnano.2014.152 ↗
33. Dendrite-free nanostructured anode: entrapment of lithium in a 3D fibrous matrix for ultra-stable lithium-sulfur batteries10.1002/smll.201470130 ↗
34. High performance lithium–sulfur batteries: advances and challenges10.1039/C4TA02097A ↗
35. The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth10.1038/ncomms8436 ↗
36. Role of LiNO3 in rechargeable lithium/sulfur battery10.1016/j.electacta.2012.03.081 ↗
37. Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte10.1016/j.jpowsour.2011.08.027 ↗