Phase evolution of Mo-W-Cu alloy rapid prepared by spark plasma sintering
Source abstract
Abstract
Abstract In this paper, a novel Mo-W-Cu alloy with the relative density of 94%, fine microstructure, good electrical conductivity and hardness is prepared at a low temperature (800 °C) in a short time (5 min) under the combined action of discharge plasma, high frequency impulse, electric field and hot pressed sintering. The phase evolution and the phase structure of new phases are discussed based on the comprehensive analysis of XRD and TEM. The results show that Mo-W-Cu alloy consists of W, Mo, Cu phase and the new phases including Mo-W ordered phase at the Mo/W interface, Cu0.4W0.6 intermetallic compound at the W/Cu interface and Mo-Cu solid solution at the Mo/Cu interface. All of the new phases are BCC structure. The type of new phases obtained in this experiment is consistent with the calculation results based on the theory of Hume-Rothery, the correction theory of solid solution formation, and the theory of electronegativity. This presented research is expected to provide reference for the further research of Mo-W-Cu alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Fusion materials and technologies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Effects of Ag addition on electrical and thermal properties of Mo-Cu composites10.1016/j.jallcom.2015.10.098 ↗
2. Phase-control enabled superior mechanical and electrical properties of nanocrystalline Tungsten-Molybdenum thin films10.1002/adem.201700354 ↗
3. Activated liquid phase sintering of W-Cu and Mo-Cu10.1016/j.ijrmhm.2015.04.030 ↗
4. Microstructural study on the effect of directional infiltration and Ni activator on tensile strength and conductivity of W-10 wt%Cu composite10.1016/j.ijrmhm.2017.11.012 ↗
5. Experimental investigations on the synthesis of W-Cu nanocomposite through spark plasma sintering10.1016/j.jallcom.2015.03.183 ↗
6. Liquid phase sintering of mechanically alloyed Mo-Cu powders10.1016/j.msea.2017.06.090 ↗
7. Preparation and properties of Mo-Cu and W-Cu alloys
8. Microstructure and properties of Cu-50Mo contact materials prepared by spark plasma sintering process
9. Preparation of W-Cu alloy sintered by two methods based on Electric Field
10. Principle and application of spark plasma sintering technology
11. A LEED study of the epitaxial growth of copper on the (110) surface of tungsten10.1016/0039-6028(66)90075-6 ↗
12. Adsorption and surface diffusion of copper on tungsten10.1063/1.1697276 ↗
13. Evaluating modulus and hardness enhancement in evaporated Cu/W multilayers10.1016/j.actamat.2006.07.043 ↗
14. Liang · 2013
15. Zhou · 2004
16. Non-equilibrium W-Cu system alloy powder and bulk body prepared by mechanical alloying and shock compression10.1023/A:1018578725262 ↗
17. Influence of copper content on the property of Cu–W alloy prepared by microwave vacuum infiltration sintering10.1016/j.jallcom.2013.12.202 ↗
18. Mizutani · 2010
19. Zhang · 2008
20. Zhai · 2017