Investigation of the p-type dye-sensitized solar cell based on full Cu2O electrodes
Source abstract
Abstract
Abstract The construction and testing of the p-type dye-sensitized solar cell based on full Cu 2 O electrodes using traditional P1 dye and the electrolyte based on the I 3 − /I − redox couple are reported. The counter electrode and the semiconductor material for the cathode based on Cu 2 O were prepared in single low-temperature hydrothermal technology using low cost precursor materials. The p-type dye-sensitized solar cell with full Cu 2 O electrodes has provided twice as much J SC and V OC as a DSSC using Pt as a counter electrode. Furthermore the power conversion efficiency is improved by about 60% by replacing conventional platinum with a Cu 2 O/Cu counter electrode. Based on these favorable characteristics this proof of principle "full-copper" p-type DSSC opens a fascinating opportunity towards environmentally friendly and large-scale production of DSSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Copper-based nanomaterials and applications · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Alternative power sources for remote sensors: a review10.1016/j.jpowsour.2013.06.081 ↗
2. An in-depth review on the role of carbon nanostructures in dye-sensitized solar cells10.1039/C5TA03644E ↗
3. Aqueous dye-sensitized solar cells10.1039/C4CS00456F ↗
4. Solar cells: PtCoFe nanowire cathodes boost short-circuit currents of Ru(II)-Based dye-sensitized solar cells to a power conversion efficiency of 12.29%10.1002/adfm.201703282 ↗
5. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
6. Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency10.1126/science.1209688 ↗
7. Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes10.1039/C5CC06759F ↗
8. Application of the tris(acetylacetonato)iron(III)/(II) redox couple in p-type dye-sensitized solar cells*10.1002/anie.201409877 ↗
9. Dissolution of platinum in methoxy propionitrile containing LiI/I210.1016/S0927-0248(00)00033-7 ↗
10. Three-dimensional of graphene oxide Ba2VPbSe6 framework composite attach on cellulose based counter electrode for dye-sensitized solar cell10.1016/j.jphotochem.2018.11.045 ↗
11. Recent progress in non-platinum counter electrode materials for dye-sensitized solar cells10.1002/celc.201402406 ↗
12. Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application10.1364/OE.21.011448 ↗
13. Efficiency enhancement of ZnO/Cu2O solar cells with well oriented and micrometer grain sized Cu2O films10.1063/1.5017002 ↗
14. Efficient charge carrier separation and excellent visible light photoresponse in Cu2O nanowires10.1016/j.nanoen.2018.05.028 ↗
15. Electrochemically deposited p–n homojunction cuprous oxide solar cells10.1016/j.solmat.2008.09.023 ↗
16. Thin-film transistors based on p-type Cu2O thin films produced at room temperature10.1063/1.3428434 ↗
17. Highly efficiency p-type dye sensitized solar cells based on polygonal star-morphology Cu2O material of photocathodes10.1007/s40242-014-4020-3 ↗
18. Investigation of coral-like Cu2O nano/microstructures as counter electrodes for dye-sensitized solar cells10.3390/ma8095274 ↗
19. Coupling of a copper dye with a copper electrolyte: a fascinating springboard for sustainable dye-sensitized solar cells10.1021/acsaem.7b00196 ↗
20. Effect of the addition of polyvinylpyrrolidone as a pore-former on microstructure and mechanical strength of porous alumina ceramics10.1016/j.ceramint.2013.03.007 ↗
21. Controllable synthesis of Cu2O microcrystals via a complexant-assisted synthetic route10.1002/ejic.200900866 ↗
22. One-step hydrothermal synthesis of a porous Cu2O film and its photoelectrochemical properties10.1002/cphc.201300735 ↗
23. New contributions to the optics of intensely light scattering materials. Part I10.1364/JOSA.38.000448 ↗
24. Investigation of the structure and surface characteristics of Cu-Ni-M(III) mixed oxides (M = Al, Cr and In) prepared from layered double hydroxide precursors10.1016/j.apsusc.2009.03.019 ↗
25. Surfactant assisted synthesis of cuprous oxide (Cu2O) nanoparticles via solvothermal process
26. Hydrothermal synthesis of monodisperse Ag2Se nanoparticles in the presence of PVP and KI and their application as oligonucleotide labels10.1039/b719207j ↗
27. Characteristics of the iodide/triiodide redox mediator in dye-sensitized solar cells10.1021/ar900138m ↗
28. Flat-band potential of a semiconductor: using the Mott–Schottky equation10.1021/ed084p685 ↗
29. Highly stable copper oxide composite as an effective photocathode for water splitting via a facile electrochemical synthesis strategy10.1039/C1JM14478B ↗
30. Nitrogen-Doped ZnO nanowire arrays for photoelectrochemical water splitting10.1021/nl900772q ↗
31. Enhanced performance of a dye-sensitized solar cell with a modified poly (3,4-ethylenedioxythiophene)/TiO2/FTO counter electrode10.1016/j.electacta.2009.04.045 ↗
32. Effect of metal-doping in TiO2 on fill factor of dye-sensitized solar cells10.1063/1.3635788 ↗
33. Cu2O/CuO bilayered composite as a high-efficiency photocathode for photoelectrochemical hydrogen evolution reaction10.1038/srep35158 ↗
34. Cyclotron resonance of electrons and of holes in cuprous oxide, Cu2O10.1088/0022-3719/9/8/014 ↗