journal article·2020-01Open access

Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials

Lourdes D. Bobbio, Brandon Bocklund, Ashley Reichardt, Richard Otis, John Paul Borgonia, Robert Peter Dillon, Andrew A. Shapiro, Bryan W. McEnerney, Peter Hosemann, Zi-Kui Liu, Allison M. Beese

Abstract

Abstract This study focuses on the formation of the σ phase in three functionally graded material (FGM) systems made by additive manufacturing (AM): stainless steel 420 (SS420) to V to Ti–6Al–4V, Ti–6Al–4V to V to stainless steel 304 L (SS304L), and SS420 to V. Directly joining Ti–6Al–4V and stainless steel may result in the formation of brittle Fe–Ti intermetallics. This study investigates the potential use of V as an intermediate element between terminal alloys of Ti–6Al–4V and stainless steel. Experimental analysis of the elemental and phase composition revealed that different amounts of σ phase were present in the three FGM systems at locations with similar elemental compositions. Computational studies were performed to simulate the thermal history, phase transformation kinetics, and σ phase growth within these FGMs. The computations suggested that, at the conditions studied, the σ phase should nucleate faster and grow to a larger volume fraction in the SS420–V alloy than the SS304L–V alloy, contrasting with experimental observations. Instead, experimental analysis confirmed that the disparate growth of σ phase in the FGMs was due differences in cracking during fabrication, resulting in different amounts of time spent at the elevated temperatures conducive to σ phase growth in each of the samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Functionally graded Material : an overview
2. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
3. Developing gradient metal alloys through radial deposition additive manufacturing10.1038/srep05357 ↗
4. Experimental analysis and thermodynamic calculations of an additively manufactured functionally graded material of V to Invar 36
5. Interfacial properties of diffusion bonded Ti-6Al-4V to AISI 304 stainless steel by inserting a Cu interlayer10.1007/s00170-008-1493-6 ↗
6. The effect of intermetallics on the strength properties of diffusion bonds formed between Ti-5.5Al-2.4V and 304 stainless steel10.1016/S0921-5093(03)00649-X ↗
7. Joining of titanium to 304L stainless steel by friction welding10.1016/j.jmatprotec.2009.06.018 ↗
8. Interdiffusion studies in titanium-304 stainless steel system10.1016/S0022-3115(98)00179-2 ↗
9. Development of processing windows for diffusion bonding of Ti–6Al–4V titanium alloy and 304 stainless steel with silver as intermediate layer10.1016/S1003-6326(15)63919-X ↗
10. Characterization of transition joints of commercially pure titanium to 304 stainless steel10.1016/S1044-5803(02)00306-6 ↗
11. Dissimilar welding of titanium alloys to steels
12. Evaluation of interface microstructure and mechanical properties of the diffusion bonded joints of Ti-6Al-4V alloy to micro-duplex stainless steel10.1016/j.msea.2011.02.050 ↗
13. Diffusion bonded transition joints of titanium to stainless steel with improved properties10.1016/S0921-5093(03)00298-3 ↗
14. Stainless steel to titanium bimetallic structure using LENS
15. Dissimilar laser welding of AISI 316L stainless steel to Ti-6Al-4V alloy via pure vanadium interlayer10.1016/j.msea.2014.10.084 ↗
16. Laser deposition additive manufacturing of 17-4PH stainless steel on Ti-6Al-4V using V interlayer10.1080/21663831.2019.1596989 ↗
17. Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing10.1016/j.matdes.2016.05.016 ↗
18. Fabrication and characterization of a functionally graded material from Ti-6Al-4 V to SS316 by laser metal deposition
19. Sigma phase precipitation in duplex stainless steel 220510.1016/j.msea.2006.08.107 ↗
20. Characterization of a functionally graded material of Ti-6Al-4V to 304L stainless steel with an intermediate V section10.1016/j.jallcom.2018.01.156 ↗
21. Sigma phase-induced failure of AISI 310 stainless steel radiant tubes10.1016/j.engfailanal.2017.08.027 ↗
22. Sigma-phase in Fe-Cr and Fe-V alloy systems and its physical properties10.1080/10408436.2011.589232 ↗
23. Thermomechanical model development and in situ experimental validation of the Laser Powder-Bed Fusion process
24. Kaufman · 1970
25. Saunders · 1998
26. Lukas · 2007
27. First-principles calculations and CALPHAD modeling of thermodynamics10.1007/s11669-009-9570-6 ↗
28. Liu · 2016
29. The compound energy formalism10.1016/S0925-8388(00)01481-X ↗
30. Homogeneous second-phase precipitation
31. 2015
32. 2015
33. Wrought titanium and titanium alloys
34. Phase transformations in alloys of the Fe-V system10.1016/j.jallcom.2005.02.030 ↗
35. Additive manufacturing of a functionally graded material from Ti-6Al-4V to invar: experimental characterization and thermodynamic calculations10.1016/j.actamat.2016.12.070 ↗
36. The V ( vanadium ) system10.1007/BF02873701 ↗
37. Valencia · 2008
38. Fieldhouse · 1961
39. Kim · 1975
40. The emissivity of metals and oxides10.6028/bulletin.264 ↗
41. DeWitt · 1985