Thermal cycling, shear and insulating characteristics of epoxy embedded Sn-3.0Ag-0.5Cu (SAC305) solder paste for automotive applications
Source abstract
Abstract
Abstract In this study, lead free solder alloy paste is fabricated using Sn-3.0Ag-0.5Cu (SAC305) powder mixed with epoxy based polymer and flux. The solder paste is reflowed onto Cu pad of 1608 chip, and the surface insulation resistance (SIR) of the joint is measured. The thermal shock reliability of the solder/Cu joint from −40 °C to 125 °C for 1000 cycles of aging is investigated. Shear test is also performed on the joint after thermal cycling. The results show that the SIR of the reflowed solder bump is around 2.58 × 1013 Ω compared to 3.21 × 1013 Ω of the flux. An increased growth of Cu6Sn5 intermetallic compounds (IMCs) occurs at the solder/Cu bonding interface with increasing number of thermal cycles. There is no appreciable damage in epoxy containing solder paste up to 1000 cycles except the formation of voids and cracks. The shear force of epoxy containing solder joint after thermal cycling for 1000 cycles is ≈34 N over 29 N for SAC305 without epoxy. This shows around 14% increment in shear strength in the presence of epoxy due to the slower growth rate of Cu-Sn IMCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Fernandes · 2010
2. Trends and Outlook of the Auto Electronics Industry, Deloitte China Practice, ©2013, Deloitte Touche Tohmatsu Certified Public Accountants LLP. https://www.roboticsbusinessreview.com/wp-content/uploads/2016/05/deloitte-cn-mfg-auto-electronic-industry-en-210314.pdf.
3. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
4. Six cases of reliability study of Pb-free solder joints in electronic packaging technology10.1016/S0927-796X(02)00007-4 ↗
5. Advances in lead-free electronics soldering10.1016/S1359-0286(00)00036-X ↗
6. 2005 · 1
7. Lead-free solder for automotive electronics and reliability evaluation of solder joint
8. Lead-free solder implementation for automotive electronics
9. Tiederle · 2004 · 52
10. Prediction of thermal fatigue life on mBGA solder joint using Sn–3.5Ag, Sn–3.5Ag–0.7Cu, Sn–3.5Ag–3.0In–0.5Bi solder alloys
11. Characteristics of Sn–1.7Bi–0.7Cu–0.6In lead-free solder
12. A study on the soldering characteristics of Sn–Ag–Bi–In ball in BGA
13. Effects of intermetallic compounds on properties of Sn-Ag-Cu lead-free soldered joints10.1016/S0925-8388(02)01166-0 ↗
14. Printing morphology and rheological characteristics of lead-free Sn–3Ag–0.5Cu (SAC) solder pastes10.6117/kmeps.2014.21.4.083 ↗
15. Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders (Sn–3.5Ag, Sn–3.8Ag–0.7Cu and Sn–0.7Cu) on Cu10.1557/JMR.2002.0042 ↗
16. Composite lead-free electronic solders10.1007/s10854-006-9019-1 ↗
17. A. Sharma, S. Das, K. Das, Pulse electrodeposition of lead-free tin-based composites for microelectronic packaging, In: Electrodeposition of Composite Materials, Dr. A.M.A Mohamed (Ed.), InTech, DOI: 10.5772/62036. Available from: http://www.intechopen.com.10.5772/62036 ↗
18. Development of lead free pulse electrodeposited tin based composite solder coating reinforced with ex situ cerium oxide nanoparticles10.1016/j.jallcom.2013.06.023 ↗
19. Fabrication of Sn–Ag/CeO2 electro-composite solder by pulse electrodeposition10.1007/s11661-013-1894-5 ↗
20. Research advances in nano-composite solders10.1016/j.microrel.2008.10.004 ↗
21. Influence of La2O3 nanoparticle additions on microstructure, wetting, and tensile characteristics of Sn–Ag–Cu alloy10.1016/j.matdes.2015.07.137 ↗
22. Effect of graphene nanoplatelets on wetting, microstructure, and tensile characteristics of Sn-3.0Ag-0.5Cu (SAC) alloy10.1007/s11661-015-3214-8 ↗
23. Effect of aluminium additions on wettability and intermetallic compound (IMC) growth of lead free Sn–2 wt. %Ag–5 wt. %Bi soldered joints10.1007/s13391-014-3364-7 ↗
24. Electrical interconnection with a smart ACA composed of fluxing polymer and solder powder10.4218/etrij.10.0109.0400 ↗
25. Characterization of polymer matrix and low melting point solder for anisotropic conductive film10.1016/j.mee.2007.07.005 ↗
26. Electrical properties of solder filled anisotropically conductive adhesives
27. Isotropic conductive adhesives with fusible filler particles10.1007/s11664-004-0162-2 ↗
28. Novel interconnection method using electrically conductive paste with fusible filler10.1007/s11664-005-0071-z ↗
29. Epoxy solder paste and its applications
30. Mechanical property of the epoxy-contained Sn–58Bi solder with OSP surface finish10.1016/j.jallcom.2014.01.078 ↗
31. A model study of low residue no-clean solder paste10.1108/eb037814 ↗
32. Surface Mount Resistors Technical Guide, Version 3, Panasonic, Circuit Components Business Division Automotive & Industrial Systems Company Panasonic Corporation, pp. 1–28. https://industrial.panasonic.com/cdbs/www-data/pdf/RDA0000/AOA0000COL21.pdf.
33. Surface Insulation Resistance, Fluxes, IPC-TM-650 Test Methods Manual, IPC, Available from: www.ipc.org.
34. Solder joint structure and reliability of board level BGA package using no-clean curable solder paste
35. R. Michalkiewicz, J. Green, S. Opperhauser, Surface Insulation Resistance Testing of Soldering Pastes and Fluxes, Trace Laboratories, East Hunt Valley, Maryland, USA, Available from: www.nts.com.
36. The impact of temperature and humidity conditions on surface insulation resistance values for various fluxes10.1108/09540919910254921 ↗
37. The use of shear testing and thermal cycling for assessment of solder joint reliability
38. Shear strength and brittle failure of low-Ag SAC-Bi-Ni solder joints during ball shear test