Elastomer based force sensor fabricated by 3D additive manufacturing
Source abstract
Abstract
The aim of this paper is an investigation of the additive manufacturing for the realization of a low-cost sensor and its application for force measurements. The proposed sensor consists of an inductor, an elastic spacer and a smooth ferrite plate. The inductor is fabricated by 3D printing technology. The spacer is realized in the form of an elastic mesh which was realized by employing 3D printing technology for mold fabrication in which is poured liquid silicone elastomer Ecoflex. The commercially available ferrite material is used as a magnetic part of the sensor. The dimensions of the developed sensor with casing are 25.2 x 29.3 x 7.7 mm3. The working principle of the sensor bases on the changes of inductance, when the distance between the inductor and the ferrite decreases due to the compression of the spacer with applied force. The proposed sensor is designed, fabricated and finally characterized within the force range from 0 to 2 N.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Tactile and Sensory Interactions · Robot Manipulation and Learning
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Power, Electronic and Telecommunication Engineering, Faculty of Technical Sciences , 21000 Novi Sad, Serbia
Funding
Ministarstvo prosvete, nauke i tehnološkog razvoja
References (16)
Show source-provided references
1. A compliant 3-axis fiber-optic force sensor for biomechanical measurement10.1109/jsen.2017.2750157 ↗
2. 3D printed force sensor with inkjet printed piezoresistive based strain gauge
3. Normal and shear force measurement using a flexible polymer tactile sensor with embedded multiple capacitors10.1109/jmems.2008.921727 ↗
4. Performance analysis of a flexible polyimide based device for displacement sensing10.2298/fuee1502287k ↗
5. Passive wireless sensor for force measurements
6. Capacitive force sensor fabricated in additive technology
7. Flexible force sensor with micro-pyramid arrays based on 3D printing
8. Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes–ecoflex nanocomposites10.1088/0957-4484/26/37/375501 ↗
9. Flexible piezocapacitive sensors based on wrinkled microstructures: Toward low-cost fabrication of pressure sensors over large areas10.1039/c7ra06997a ↗
10. A soft three-axis load cell using liquid-filled three-dimensional microchannels in a highly deformable elastomer10.1109/lra.2018.2792693 ↗
11. Application of stretchable membrane with ferrite flaky fillers in inductive displacement sensor
12. 7, 2019
13. 3, 2019
14. 2, 2014
15. 02.2019
16. Analysis on variable inductances of planar coils sandwiched by soft magnetic layers10.1109/tmag.2018.2846244 ↗