Investigations of void collapse in nanoporous Cu by molecular dynamics simulations
Source abstract
Abstract
Mechanical responses of nanoporous Cu samples under various loading conditions are investigated by molecular dynamics simulations. Effects of loading mode, initial void size, temperature, and void distribution are analyzed. The simulations show that the collapse time under uniaxial compression is about three times that under triaxial compression, and the collapse rate increases as the temperature rises. Dislocation nucleation is found to stimulate the collapse of void. For samples with a single void, the final dislocation density under triaxial compression is lower than that under uniaxial compression, which is due to that the dislocation accumulation rate greatly slows down after the void is fully collapsed. For samples with multiple voids, the dislocation accumulation rate under triaxial compression is much faster than that under uniaxial compression, resulting in higher dislocation density under triaxial compression. Irrespective of the initial void size, the evolutions of compression stress and void volume fraction remain invariant when the initial void volume fraction is fixed; however, the dislocation density decreases as the initial void radius increases.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanoporous metals and alloys · Microstructure and mechanical properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanics and Materials, HoHai University 1 , Nanjing 210098, China
Laboratory of Computational Physics, Institute of Applied Physics and Computational Mathematics 2 , Beijing 100088, China
LSEC, ICMSEC, Academy of Mathematics and Systems Science, CAS 3 , Beijing 100190, China
School of Mathematical Sciences, University of Chinese Academy of Sciences 4 , Beijing 100049, China
Funding
National Natural Science Foundation of China
References (37)
Show source-provided references
1. 2003
2. Atomic scale simulations of ductile failure micromechanisms in nanocrystalline Cu at high strain rates10.1103/physrevb.80.104108 ↗
3. Atomic scale studies of spall behavior in nanocrystalline Cu10.1063/1.3517827 ↗
4. Dynamic failure micromechanisms in nanocrystalline Cu10.3970/cmc.2011.024.043 ↗
5. Modelling of nucleation and void growth in dynamic pressure loading, application to spall test on tantalum10.1007/s10704-006-0070-y ↗
6. The modified void nucleation and growth model (MNAG) for damage evolution in BCC Ta10.3390/app11083378 ↗
7. Molecular dynamics studies of thermal dissipation during shock induced spalling10.1063/1.4821341 ↗
8. Molecular dynamics studies of the roles of microstructure and thermal effects in spallation of aluminum10.1016/j.mechmat.2015.01.007 ↗
9. Atomic-scale modeling of the void nucleation, growth, and coalescence in Al at high strain rates10.1016/j.mechmat.2019.05.005 ↗
10. Molecular dynamics simulations of micro-spallation of single crystal lead10.1088/0965-0393/21/5/055005 ↗
11. Molecular dynamics simulations on shock response and spalling behaviors of semi-coherent {111} Cu-Al multilayers10.1016/j.ijmecsci.2019.105414 ↗
12. Molecular dynamics study of the micro-spallation of single crystal tin10.1016/j.commatsci.2014.07.014 ↗
13. Compression-induced high strain rate void collapse, tensile cracking, and recrystallization in ductile single and polycrystals10.1016/0167-6636(90)90013-6 ↗
14. Collapse behavior of compacted clays in suction-controlled triaxial tests10.1520/GTJ11418 ↗
15. Void collapse in shocked β-HMX single crystals: Simulations and experiments10.1002/prep.201900251 ↗
16. Void collapse and subsequent spallation in Cu50Zr50 metallic glass under shock loading by molecular dynamics simulations10.1063/1.5098823 ↗
17. Influence of temperature on void collapse in single crystal nickel under hydrostatic compression10.3390/ma14092369 ↗
18. Atomistic study on the dynamic response of the void or helium bubble in aluminum under compression and tension10.1063/5.0004698 ↗
19. Effect of void in deformation and damage mechanism of single crystal copper: A molecular dynamics study10.1088/1361-651x/ac3051 ↗
20. Molecular dynamics study on void collapse in single crystal hcp-Ti under hydrostatic compression10.1016/j.commatsci.2019.109280 ↗
21. Atomistic simulation of the mechanical response of a nanoporous body-centered cubic metal10.1016/j.scriptamat.2013.01.035 ↗
22. Plastic deformation of a porous bcc metal containing nanometer sized voids10.1016/j.commatsci.2014.02.047 ↗
23. Growth and collapse of nanovoids in tantalum monocrystals10.1016/j.actamat.2010.11.001 ↗
24. Anisotropic shock responses of nanoporous Al by molecular dynamics simulations10.1371/journal.pone.0247172 ↗
25. Compression of a flapping mechanophore accompanied by thermal void collapse in a crystalline phase10.1021/jacs.8b03833 ↗
26. Atomistic modeling of shock-induced void collapse in copper10.1063/1.1906307 ↗
27. Collapse of void arrays under stress wave loading10.1017/S0022112009993545 ↗
28. Structural stability and lattice defects in copper: Ab initio, tight-binding, and embedded-atom calculations10.1103/physrevb.63.224106 ↗
29. Shock-induced spall in solid and liquid Cu at extreme strain rates10.1063/1.3158062 ↗
30. LAMMPS—A flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
31. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data10.1088/0965-0393/18/8/085001 ↗
32. Structure identification methods for atomistic simulations of crystalline materials10.1088/0965-0393/20/4/045021 ↗
33. Visualization and analysis of atomistic simulation data with OVITO—The open visualization tool10.1088/0965-0393/18/1/015012 ↗
34. Dynamics of viscoplastic deformation in amorphous solids10.1103/physreve.57.7192 ↗
35. Theory of shear banding in metallic glasses and molecular dynamics calculations10.2320/matertrans.mj200769 ↗
36. Hot isostatic pressing of single-crystal nickel-base superalloys: Mechanism of pore closure and effect on Mechanical properties10.1051/matecconf/20141408003 ↗
37. 1982