Supercooling and cold energy storage characteristics of nano-media in ball-packed porous structures
Source abstract
Abstract
The presented experiments aimed to study the supercooling and cold-energy storage characteristics of nanofluids and water-based nano-media in ball-packed porous structures (BPS). Titanium dioxide nanoparticles (TiO2 NPs) measuring 20nm and 80nm were used as additives and sodium dodecyl benzene sulphonate (SDBS) was used as anionic surfactant. The experiments used different concentrations of nanofluid, distilled with BPS of different spherical diameter and different concentrations of nano-media, and were conducted 20 times. Experimental results of supercooling were analysed by statistical methods. Results show that the average and peak supercooling degrees of nanofluids and nano-media in BPS are lower than those of distilled water. For the distilled water in BPS, the supercooling degree decreases on the whole with the decrease of the ball diameter. With the same spherical diameter (8mm) of BPS, the supercooling degree of TiO2 NPs measuring 20nm is lower than the supercooling degree of distilled water in BPS. Step-cooling experiments of different concentrations of nanofluids and nano-media in BPS were also conducted. Results showed that phase transition time is reduced because of the presence of TiO2 NPs. The BPS substrate and the NPs enhance the heat transfer. Distilled water with a porous solid base and nanoparticles means the amount of cold-energy storage increases and the supercooling degree and the total time are greatly reduced. The phase transition time of distilled water is about 3.5 times that of nano-media in BPS.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Phase Change Materials Research · Heat Transfer and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shanghai Maritime University Institute of Cool Thermal Storage Technology, , 1550 Harbour Boulevard, Harbour City, Pudong New Area, Shanghai 201306, China
Funding
National Natural Science Foundation of China
References (28)
Show source-provided references
1. 2011 · 1
2. Enhancing thermal conductivity of fluids with nanoparticles
3. Boiling two-phase flow and heat transfer within thin powder porous layer at super-atmospheric pressures10.1007/BF01441589 ↗
4. Coupled processes of chemical reaction, heat and mass transfer in non-thermal equilibrium porous medium
5. Discrete models of liquid-vapour phase change phenomena in porous media10.1016/S0035-3159(98)80019-6 ↗
6. Numerical study on the thermal behavior of phase change materials (PCMs) embedded in porous metal matrix10.1016/j.solener.2013.11.017 ↗
7. Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material10.1016/S0017-9310(00)00309-4 ↗
8. Heat transfer enhancement in energy storage in spherical capsules filled with paraffin wax and metal beads10.1016/j.enconman.2005.04.003 ↗
9. Natural convection melting of a frozen porous medium10.1016/0017-9310(90)90072-3 ↗
10. Thermosolutal convection during melting in a porous medium saturated with aqueous solution10.1080/10407780802084637 ↗
11. Discrete models of liquid-vapour phase change phenomena in porous media10.1016/S0035-3159(98)80019-6 ↗
12. Mathematical study of a model for liquid–vapour phase change in porous media10.1006/jmaa.1996.0440 ↗
13. Melting of ice-aluminum balls system10.1016/0894-1777(90)90090-T ↗
14. Experimental study of the low-pressure-vaporization of water in different porous media10.1016/j.ijheatmasstransfer.2013.06.037 ↗
15. Thermal conductivity and phase-change properties of aqueous alumina nanofluid10.1016/j.enconman.2012.12.004 ↗
16. A new thermal conductivity model for nanofluids10.1007/s11051-004-3170-5 ↗
17. Analysis of the nucleation of nanofluids in the ice formation process10.1016/j.enconman.2009.09.001 ↗
18. Enhanced heat transfer characteristics of water based copper oxide nanofluid PCM (phase change material) in a spherical capsule during solidification for energy efficient cool thermal storage system10.1016/j.energy.2014.05.089 ↗
19. Experimental study on thermophysical properties of nanofluids as phase-change material (PCM) in low temperature cool storage10.1016/j.enconman.2012.04.010 ↗
20. Preparation and melting/freezing characteristics of Cu/paraffin nanofluid as phase-change material (PCM)10.1021/ef9013967 ↗
21. Heat transfer characteristics of phase change nanocomposite materials for thermal energy storage application10.1016/j.ijheatmasstransfer.2014.03.054 ↗
22. Solid–liquid phase transition of nanofluids10.1016/j.ijheatmasstransfer.2012.11.044 ↗
23. Pool boiling characteristics of nano-fluids10.1016/S0017-9310(02)00348-4 ↗
24. Numerical investigation of subcooled flow boiling of a nanofluid10.1016/j.ijthermalsci.2012.08.008 ↗
25. Supercooling of water
26. Heterogeneous surface crystallization observed in undercooled water10.1021/jp0506336 ↗
27. Fundamental research on the supercooling phenomenon on heat transfer surfaces—investigation of an effect of characteristics of surface and cooling rate on a freezing temperature of supercooled water10.1016/0017-9310(90)90025-P ↗
28. Study on rapid measure of metallic material heat conductivity based on laser rapid heating