journal article·2025-11-01Open access

Effects of thermal shock on mechanical properties and microstructural integrity of aluminum–SiC composites

T. Gopalakrishnan, Udhayakumar R, R. Pugazhenthi, Manikandan R, Mohammad Kanan, Gaurang Tank, Deepa Simon

AIP Advances· Volume 15· Issue 11

Abstract

Aluminum–SiC (Al–SiC) composites have gained significant prominence in the aerospace and automotive industries due to their exceptional combination of high strength-to-weight ratio, superior thermal conductivity, and excellent wear resistance characteristics. Despite their widespread industrial applications, the behavior of these composites under cyclical thermal conditions remains inadequately characterized and understood. This comprehensive study meticulously examines the effects of cyclic thermal shock (consisting of 20 complete cycles from 300 to 25 °C) on the mechanical properties and microstructural integrity of Al–SiC composites containing 15 vol. % SiC reinforcement. Extensive mechanical testing revealed notable property degradation patterns: ultimate tensile strength decreased by 7.8% (from 320 to 295 MPa), yield strength diminished by 8.0% (from 250 to 230 MPa), and Vickers hardness reduced by 12.5% (from 145 HV to 130 HV). More significantly, energy absorption properties exhibited pronounced deterioration, with impact toughness dropping by 33.3% and fracture toughness declining by 28.0%, indicating a substantial compromise in damage tolerance capabilities. Detailed SEM microstructural analysis identified three primary degradation mechanisms: matrix microcracking, SiC particle fragmentation, and interfacial debonding between the aluminum matrix and SiC reinforcement. These findings emphasize the critical need for enhanced interfacial bonding strength and innovative reinforcement strategies to improve thermal shock resistance in Al–SiC composites, particularly for applications involving thermal cycling conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Vels Institute of Science Technology and Advanced Studies (VISTAS) 1 , Chennai 600117,

Department of Mechanical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University 2 , Chennai 602105, Tamilnadu, 602105,

Department of Industrial Engineering, College of Engineering, University of Business and Technology 3 , Jeddah 21448,

4 Department of Mechanical Engineering, College of Engineering, Zarqa University, Zarqa, Jordan

Centre for Research Impact & Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University 5 , Rajpura 140401, Punjab,

Adjunct Faculty, Department of Manufacturing, School of Engineering, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University 6 , Chennai 602105, Tamil Nadu,

References (38)

Show source-provided references
1. Metal matrix composites: Revolutionary materials for shaping the future10.1007/s43939-025-00226-6 ↗
2. Rangappa · 2023
3. Aluminium matrix composites: Challenges and opportunities10.1007/bf02717141 ↗
4. Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite10.1016/j.msea.2019.03.037 ↗
5. Al-Si controlled expansion alloys for electronic packaging applications10.1016/j.pmatsci.2024.101268 ↗
6. Effect of surface treatment on the performance of composite-composite and composite-metal adhesive joints10.1002/pc.26940 ↗
7. Advances in friction stir processing of aluminum 2024: A review of nanoparticle-reinforced surface composites10.1007/s00170-025-15332-1 ↗
8. A comprehensive review on the new developments consideration in a stir casting processing of aluminum matrix composites10.1016/j.matpr.2021.12.359 ↗
9. Heterogeneous structures and morphological transitions of composite materials and its applications10.1007/s42114-024-01065-4 ↗
10. Polycrystalline diamond (PCD) tool material: Emerging applications, problems, and possible solutions10.1007/978-3-662-45088-8_1 ↗
11. Transverse and longitudinal coefficient of thermal expansion of carbon fibers at high temperatures (300–2500 K)10.1016/j.carbon.2008.07.035 ↗
12. Particle size effect on the interfacial properties of SiC particle-reinforced Al-Cu-Mg composites10.1016/j.msea.2017.11.068 ↗
13. Negative thermal expansion in nanosolids10.1021/acs.accounts.9b00260 ↗
14. Micro-stress prediction in composite laminates with high stress gradients10.1016/s0020-7683(03)00018-0 ↗
15. A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials10.1016/j.compstruct.2005.11.034 ↗
16. Thermal expansion behaviors of aluminum composite reinforced with carbon nanotubes10.1016/j.matlet.2007.11.086 ↗
17. Progress in machining-induced residual stress and microstructural evolution of inhomogeneous materials and composites10.1007/s42114-023-00698-1 ↗
18. Aluminum matrix composites: Structural design and microstructure evolution in the deformation process10.1016/j.jmrt.2024.03.237 ↗
19. Effect of thermal–mechanical damage on deformation behaviours and fracture characteristics of sandstone under cyclic loading10.1016/j.engfracmech.2025.111091 ↗
20. Recent advances in processing, and mechanical, thermal and electrical properties of Cu-SiC metal matrix composites prepared by powder metallurgy10.1016/j.pmatsci.2023.101191 ↗
21. Effects of thermal cycles on mechanical properties of an optimized polymer concrete10.1016/j.conbuildmat.2011.03.047 ↗
22. Revealing the dimensional stability mechanisms of SiC/Al composite under long-term thermal cycling10.1016/j.ceramint.2022.01.277 ↗
23. Dynamic mechanical properties and deterioration of red-sandstone subjected to repeated thermal shocks10.1016/j.enggeo.2016.07.015 ↗
24. Dynamic properties of thermally treated granite subjected to cyclic impact loading10.1007/s00603-018-1606-y ↗
25. An experimental study on tensile characteristics of granite rocks exposed to different high-temperature treatments10.1007/s40948-018-0098-2 ↗
26. Additive manufacturing in the context of repeatability and reliability10.1007/s11665-023-07897-3 ↗
27. Effect of thermal cycling on the properties of high-performance concrete: Microstructure and mechanism10.1016/j.conbuildmat.2020.118310 ↗
28. Fabrication, mechanical properties and in vitro degradation behavior of newly developed Zn Ag alloys for degradable implant applications10.1016/j.msec.2017.04.023 ↗
29. Processing methods and mechanical properties of aluminium matrix composites.10.1155/2020/3765791 ↗
30. Ductility dip cracking mechanisms and characterization: A review10.1007/s10853-024-10112-w ↗
31. Mechanisms of fatigue-crack propagation in ductile and brittle solids10.1023/a:1018655917051 ↗
32. Comparison of friction and wear performances of brake material dry sliding against two aluminum matrix composites reinforced with different SiC particles10.1016/j.jmatprotec.2006.07.018 ↗
33. CVD-grown SiC nanowires-reinforced SiC coating on C/C composites: Focusing on antioxidation, thermal shock and high-temperature gas erosion resistance10.1016/j.surfcoat.2024.131584 ↗
34. Probabilistic models for life-cycle performance of deteriorating structures: Review and future directions10.1002/pse.180 ↗
35. Microstructure and mechanical properties of heat-treated cold spray additively manufactured titanium metal matrix composites10.1016/j.jmapro.2023.04.077 ↗
36. Preparation of MgO ceramics by low temperature sintering with MgF2 and Al2O3 as sintering additives10.1007/s10832-025-00391-3 ↗
37. Shock load transfer and plasticity deformation mechanism in carbon nanotube/CoCrFeNi composites10.1016/j.jmst.2025.01.066 ↗
38. Enhancing understanding metal matrix composites through molecular dynamics simulation: A comprehensive review10.1016/j.commatsci.2024.112993 ↗