journal article·2025-11-01Open access

Microscopic plastic deformation in Ti2AlNb alloy micro-pillars: An in situ SEM study

Yanju Wang, Aixue Sha, Xingwu Li, Shijia Wan, Yahui Dong, Yabin Yan

AIP Advances· Volume 15· Issue 11

Abstract

Ti2AlNb alloys have attracted significant attention due to their excellent mechanical properties during the application in high-temperature environments. However, due to the significant experimental difficulties, the deformation behavior of Ti2AlNb alloys at microscale has been rarely investigated. Therefore, a series of in situ compression experiments for micropillars of Ti2AlNb alloys were performed by SEM, and the effect of microscopic structures was discussed based on experimental results and statistical analysis. Stress–strain curves of micro-pillars with different diameters were obtained. Apparent strain bursts exist in the stress plateau of micro-pillars with a diameter of 1 µm. With the increase in diameter, the yield strength of micro-pillars significantly decreased, showing a strong size effect. In situ observations reveal that the crystalline slip in the B2 matrix dominates the plastic deformation in Ti2AlNb micro-pillars. On the other hand, the intermittency of plastic deformation in Ti2AlNb micro-pillars was discussed based on probability statistical analysis. With an increase in the diameter of the micro-pillar, larger displacement jumps were more liable to occur, while smaller micro-pillars tended to exhibit fewer displacement jumps. The current study provides fundamental insights into the deformation behavior of Ti2AlNb alloys at microscale.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Evaluation Center for Aeronautical and Aeroengine Application, AECC Beijing Institute of Aero-nautical Materials 1 , Beijing 100095,

Key Laboratory of Pressure Systems and Safety, Ministry of Education, School of Mechanical Power and Engineering, East China University of Science and Technology 2 , Shanghai 200237,

Funding

National Natural Science Foundation of China · WDZC Program of BIAM

References (28)

Show source-provided references
1. A new ordered orthorhombic phase in a Ti3AlNb alloy10.1016/0001-6160(88)90141-1 ↗
2. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
3. Prediction of the ordering behaviours of the orthorhombic phase based on Ti2AlNb alloys by combining thermodynamic model with ab initio calculation10.1016/j.intermet.2007.07.007 ↗
4. Annealing response of the intermetallic alloy Ti–22Al–25Nb10.1016/j.intermet.2010.02.010 ↗
5. Mater. Sci. Eng., A · 2001 · 299 · 7510.1016/s0921-5093(00)01417-9 ↗
6. Tensile deformation behavior of Ti–22Al–25Nb alloy at elevated temperatures10.1016/j.msea.2012.07.036 ↗
7. A modified Johnson-Cook constitutive equation to predict hot deformation behavior of Ti-6Al-4V alloy10.1007/s11665-014-1243-x ↗
8. Microstructure and low cycle fatigue of a Ti2AlNb-based lightweight alloy10.1016/j.jmst.2020.01.032 ↗
9. Creep of the orthorhombic phase based on the intermetallic Ti2AlNb10.1016/s0966-9795(00)00059-5 ↗
10. Creep behavior and effects of heat treatment on creep resistance of Ti-22Al-24Nb-0.5Mo alloy10.1016/j.msea.2016.10.052 ↗
11. Advanced microelectromechanical systems-based nanomechanical testing: Beyond stress and strain measurements10.1557/mrs.2019.123 ↗
12. Impact of in situ nanomechanics on physical metallurgy10.1557/mrs.2019.124 ↗
13. FIB damage of Cu and possible consequences for miniaturized mechanical tests10.1016/j.msea.2007.01.046 ↗
14. Plasticity of micrometer-scale single crystals in compression10.1146/annurev-matsci-082908-145422 ↗
15. Mechanical and microstructural single-crystal Bauschinger effects: Observation of reversible plasticity in copper during bending10.1016/j.actamat.2010.07.023 ↗
16. In situ micromechanical characterization of metallic glass microwires under torsional loading10.1007/s11340-018-00464-1 ↗
17. In situ observation on formation process of nanoscale cracking during tension-compression fatigue of single crystal copper micron-scale specimen10.1016/j.actamat.2018.04.061 ↗
18. Cyclic response of copper single crystal micro-beams10.1016/j.scriptamat.2010.05.014 ↗
19. Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction10.1016/j.actamat.2014.10.012 ↗
20. Quantitative in situ SEM high cycle fatigue: The critical role of oxygen on nanoscale-void-controlled nucleation and propagation of small cracks in Ni microbeams10.1021/acs.nanolett.8b00343 ↗
21. The role of slow screw dislocations in controlling fast strain avalanche dynamics in body-centered cubic metals10.1016/j.ijplas.2019.08.008 ↗
22. Overview of experiments on microcrystal plasticity in FCC-derivative materials: Selected challenges for modelling and simulation of plasticity10.1088/0965-0393/15/2/009 ↗
23. Statistics of dislocation slip avalanches in nanosized single crystals show tuned critical behavior predicted by a simple mean field model10.1103/physrevlett.109.095507 ↗
24. Length scale and time scale effects on the plastic flow of fcc metals10.1016/s1359-6454(01)00149-5 ↗
25. Dislocation avalanches, strain bursts, and the problem of plastic forming at the micrometer scale10.1126/science.1143719 ↗
26. Universality class of nanocrystal plasticity: Localization and self-organization in discrete dislocation dynamics10.1103/physrevlett.122.178001 ↗
27. Interpreting the stress–strain response of Al micropillars through gradient plasticity10.1016/j.msea.2013.10.082 ↗
28. Defect structure in micropillars using x-ray microdiffraction10.1063/1.2358204 ↗