Tensile flow behavior of fine-grained AZ31B magnesium alloy thin sheet at elevated temperatures
Source abstract
Abstract
Abstract The flow behavior and associated structural changes of commercial wrought AZ31B-O alloy sheet deformed in tension were analyzed in this work. Tensile tests were conducted on a sheet with a thickness of 0.6 mm and an initial average grain size of 5.7 μm at temperatures of 250 and 370 °C, with strain rates from 4 × 10 −3 to 1 × 10 −1 s −1 . The results showed that dynamic recrystallization could occur during the hot deformation of AZ31B alloy even with an original fine-grained structure due to its low stacking fault energy. Dynamic recrystallization was predominant at a lower temperature of 250 °C. Grain boundary sliding appeared to be the major deformation mechanism for testing at a temperature of 370 °C and a strain rate of 4 × 10 −3 s −1 . The deformation mechanism at 370 °C and strain rate of 1 × 10 −1 s −1 could be due to the combination of grain boundary sliding and viscous glide mechanisms resulting from the bimodal grain size structure, which comprises large-grown grains and fine recrystallized grains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Huang · J. Alloys Compd. · 2009 · 470 · 26310.1016/j.jallcom.2008.02.029 ↗
2. Chino · Mater. Sci. Eng. A · 2008 · 473 · 19510.1016/j.msea.2007.05.109 ↗
3. Chino · Mater. Sci. Eng. A · 2007 · 466 · 9010.1016/j.msea.2007.02.027 ↗
4. Jäger · J. Alloys Compd. · 2004 · 378 · 18410.1016/j.jallcom.2003.11.173 ↗
5. Prasad · Mater. Sci. Eng. A · 2008 · 487 · 31610.1016/j.msea.2007.10.038 ↗
6. Guo · J. Mater. Sci. Technol. · 2005 · 21 · 134910.1179/174328405X62387 ↗
7. Yin · Mater. Sci. Eng. A · 2005 · 392 · 32010.1016/j.msea.2004.09.039 ↗
8. Kim · J. Alloys Compd. · 2008 · 464 · 19710.1016/j.jallcom.2007.10.067 ↗
9. Jeong · J. Alloys Compd. · 2009 · 483 · 27910.1016/j.jallcom.2008.08.130 ↗
10. Yang · Trans. Nonferr. Met. Soc. Chin. · 2009 · 19 · 5510.1016/S1003-6326(08)60228-9 ↗
11. Fatemi-Varzaneh · Mater. Sci. Eng. A · 2007 · 456 · 5210.1016/j.msea.2006.11.095 ↗
12. Al-Samman · Mater. Sci. Eng. A · 2008 · 490 · 41110.1016/j.msea.2008.02.004 ↗
13. Maksoud · Mater. Sci. Eng. A · 2009 · 504 · 4010.1016/j.msea.2008.10.033 ↗
14. del Valle · Mater. Sci. Eng. A · 2008 · 487 · 47310.1016/j.msea.2007.11.024 ↗
15. Vespa · Mater. Sci. Eng. A · 2008 · 487 · 24310.1016/j.msea.2007.10.064 ↗
16. Yi · Mater. Sci. Eng. A · 2006 · 424 · 27510.1016/j.msea.2006.03.022 ↗
17. Beer · Metall. Mater. Trans. A · 2007 · 38A · 185610.1007/s11661-007-9207-5 ↗
18. Abu-Farha · J. Mater. Eng. Perform. · 2007 · 16 · 19210.1007/s11665-007-9031-5 ↗
19. Mohri · Mater. Sci. Eng. A · 2000 · 290 · 13910.1016/S0921-5093(00)00959-X ↗
20. Lukáč · Key Eng. Mater. · 1994 · 97–98 · 30710.4028/www.scientific.net/KEM.97-98.307 ↗
21. Tan · Mater. Sci. Eng. A · 2003 · 339 · 12410.1016/S0921-5093(02)00096-5 ↗
22. Hirai · Scripta Mater. · 2007 · 56 · 23710.1016/j.scriptamat.2006.09.037 ↗
23. del Valle · Metall. Mater. Trans. · 2005 · 36A · 142710.1007/s11661-005-0235-8 ↗
24. Yoshinaga · Trans. JIM · 1963 · 5 · 1410.2320/matertrans1960.5.14 ↗
25. Koike · Acta Mater. · 2003 · 51 · 205510.1016/S1359-6454(03)00005-3 ↗