journal article·2017-06

Effect of Cr and Nb on the phase transformation and pore formation of Ti-Al base alloys

Saif Haider Kayani, Nho-Kwang Park

Publisher page

Abstract

Abstract The phase transformation and its relation to the porosity of Ti-Al base alloys are investigated in order to understand the effect of composition on the pore formation during sintering at low and high temperatures. Ti-Al base alloys with nominal compositions of Ti52Al48, Ti50Al48Cr2, Ti50Al48Nb2 and Ti48Al48Cr2Nb2 are prepared by the conventional elemental powder metallurgy route. The sintering of mixed powders was carried out at 600° C (low-temperature sintering below the Al melting point) and 1200° C (high-temperature sintering). Al-rich intermetallic compound TiAl3 was primarily formed during low-temperature sintering while Ti-rich intermetallic compound Ti3Al was formed during high-temperature sintering. The phase transformations increase the overall porosity and pore size of alloys to a similar extent regardless of the alloy composition during the low-temperature sintering. However, large differences in the pore size and pore volume distribution occur depending on the composition of Ti-Al alloys during high-temperature sintering. Chromium and niobium do not affect the formation of Kirkendall voids and thus show a similar void formation behavior at 600° C, but affect the void agglomeration behavior to a different extent due to the different diffusion activities at 1200° C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. The effect of microstructure on the oxidation behaviour of TiAl-based intermetallics10.1016/0010-938X(93)90276-M ↗
2. Diffusion in the Ti-Al system10.1016/S1359-6454(99)00400-0 ↗
3. Fabrication of Ti – Al micro/nanometer-sized porous alloys through the Kirkendall effect10.1002/adma.200602398 ↗
4. Pore structure and gas permeability of high Nb-containing TiAl porous alloys by elemental powder metallurgy for microfiltration application10.1016/j.intermet.2012.07.022 ↗
5. Reaction behavior and pore formation mechanism of TiAl-Nb porous alloys prepared by elemental powder metallurgy10.1016/j.intermet.2013.08.001 ↗
6. Effects of the Al content on pore structures of porous Ti-Al alloys10.1016/j.intermet.2007.11.002 ↗
7. Effect of Nb on pore structure and tensile property of Ti – 48Al cellular alloy10.1016/j.jallcom.2007.02.077 ↗
8. Phase transformation in Ti – 48Al – 6Nb porous alloys and its influence on pore properties10.1016/j.matdes.2015.05.072 ↗
9. Pore structures and thermal insulating properties of high Nb containing TiAl porous alloys10.1016/j.jallcom.2009.12.005 ↗
10. Progress in the understanding of gamma titanium aluminides10.1007/BF03221103 ↗
11. Determination of the kinetics of TiAl3 formation from fine Ti and Al particles using differential scanning calorimetry10.1016/0921-5093(94)90314-X ↗
12. Reactive synthesis and characterization of titanium aluminides produced from elemental powder mixtures10.1007/s10973-015-4815-6 ↗
13. Differential scanning calorimetry and reaction kinetics studies of γ + α2 Ti aluminide10.1016/j.matchemphys.2012.09.039 ↗
14. Self-diffusion in γ-TiAl: an experimental study and atomistic calculations10.1016/S0966-9795(98)00117-4 ↗
15. Kinetics and mechanism of titanium hydride powder and aluminum melt reaction10.1007/s12613-012-0533-2 ↗
16. Gas formation during reaction sintering of titanium aluminides
17. Effect of pressure and temperature on phase transformation and properties of titanium aluminide obtained through reaction synthesis10.1016/S1005-0302(10)60109-0 ↗
18. Investigation of swelling behaviour of Ti-Al elemental powder mixtures during reaction sintering
19. Effect of pressure on pore structure of porous FeAl intermetallics10.1016/j.apt.2015.03.002 ↗
20. Tracer solute diffusion of Nb, Zr, Cr, Fe, and Ni in γ-TiAl: effect of preferential site occupation10.1016/S0966-9795(01)00025-5 ↗
21. Niobium and titanium diffusion in the high niobium-containing Ti-54Al-10Nb alloy10.1016/j.intermet.2005.12.007 ↗
22. Diffusivity in the Nb-Ti-Al ternary solid solution10.1016/S0925-8388(96)02358-4 ↗