journal article·2016-04

Investigation of Al–Cr alloy targets sintered by various powder metallurgy methods and their particle generation behaviors in sputtering process

Kun-Ming Chen, Deng-An Tsai, Hao-Chia Liao, In-Gann Chen, Weng-Sing Hwang

Publisher page

Abstract

Abstract Al–Cr–N films for tribological application are commonly prepared by sputtering on Al–Cr alloy targets in an Ar + N2 mixed atmosphere. Generally, a film is manufactured by co-sputtering on an Al and Cr target, which tends to produce an arbitrary composition. It is difficult to produce an alloy target with a high Al ratio by melting technology due to the formation of brittle intermetallic compound phases (IMCs). In this study, alloy targets were manufactured by various powder metallurgy methods, included hot pressing (HP), hot isostatic pressing (HIP), and low temperature novel forming (LTNF). The results showed that at higher temperature, HP targets were dense and developed a large amount of IMCs, giving the target poor mechanical properties. Cracking tended to occur on the target surface, and many particles were generated during the sputtering process. At a lower temperature, IMC formation was inhibited in these targets, but the density was poor. The HIP method produced similar results to those of HP. LTNF was developed to achieve a dense target free of IMCs. Furthermore, the sputtering performances of the alloy targets were verified. For the LTNF target, almost no arcing count was recorded, fewer particles were generated and better film uniformity was obtained. The target and sputtering characteristics of conventionally-made (HP and HIP) methods were less desirable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Ion-surface interactions and analysis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Effects of the thickness of Ti buffer layer on the mechanical properties of TiN coatings10.1016/S0257-8972(03)00243-3 ↗
2. Formation of composite ternary nitride thin films by magnetron sputtering co-deposition10.1016/j.surfcoat.2006.08.100 ↗
3. Industrial applications of superhard nanocomposite coatings10.1016/j.surfcoat.2008.05.038 ↗
4. Industrial applications of superhard nanocomposite coatings10.1016/j.surfcoat.2005.02.196 ↗
5. Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc10.1016/j.tsf.2009.03.038 ↗
6. Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions10.1016/j.surfcoat.2005.08.057 ↗
7. Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions10.1016/j.surfcoat.2005.01.043 ↗
8. Annealing effects on microstructure and mechanical properties of sputtered multilayer Cr(1−x)AlxN films10.1016/j.tsf.2011.02.063 ↗
9. Investigation on the structure and properties of AlxCr1−xN coatings deposited by reactive magnetron co-sputtering10.1016/j.jallcom.2010.04.155 ↗
10. Influence of sputtering parameters and nitrogen on the microstructure of chromium nitride thin films deposited on steel substrate by direct-current reactive magnetron sputtering10.1016/j.tsf.2010.05.095 ↗
11. Effect of sputtering target power density on topography and residual stress during growth of nanocomposite nc-TiN/a-SiNx thin films10.1016/j.diamond.2004.03.008 ↗
12. Effect of sputtering pressure and temperature on DC magnetron sputtered CrN films10.1179/174329409X389326 ↗
13. Microstructure and mechanical properties of AlCrN films deposited by CFUBMS10.1016/j.surfcoat.2006.08.076 ↗
14. Microstructure and mechanical properties of AlCrN films deposited by CFUBMS10.1016/j.surfcoat.2007.08.025 ↗
15. Interplay of microstructural features in Cr1−xAlxN and Cr1−x−yAlxSiyN nanocomposite coatings deposited by cathodic arc evaporation10.1016/j.surfcoat.2007.11.027 ↗
16. Comparison of CrAlN layers obtained with one (CrAl) or two targets (Cr and Al) by magnetron sputtering10.1016/j.tsf.2011.11.049 ↗
17. Thermodynamic investigation of the aluminum-chromium system10.1361/105497100770340219 ↗
18. Heats of formation of transition-metal aluminides10.1039/tf9605600473 ↗
19. Thermodynamic modeling of the Al–Cr system10.1016/j.jallcom.2007.06.046 ↗
20. Y. Morishita, S. Ogino, Y. Nakamura, Co-Cr-Pt-B-Based Alloy Sputtering Target and Method for Producing Same, U. S. Patent 0341184, 2013.
21. Hot-pressed Ti-Al targets for synthesizing Ti1−xAlxN films by the arc ion plating method10.1016/S0040-6090(00)01692-8 ↗
22. Elastic properties of binary NiAl, NiCr and AlCr and ternary Ni2AlCr alloys from molecular dynamic and Abinitio simulation10.1016/j.commatsci.2004.12.011 ↗
23. R. Mostovoy, G.T. Mori, Preventing defect generation from targets through applying metal spray coatings on sidewalls, US Patent 6428663, 2002.
24. H. Fukuyo, Y. Shindo, H. Takahashi, Titanium target for sputtering, US Patent 6755948, 2004.