Characterization of ternary (Ni,Co,Mn)3O4 thin films for microbolometer applications
Source abstract
Abstract
Abstract A liquid flow deposition (LFD) technique was successfully applied to grow (Ni0.1Mn2.9−xCox)O4 (NMCx, x = 0.015, 0.027, 0.048, 0.065, 0.082, 0.097, 0.119 and 0.145) thin films onto Si wafer substrates at a low temperature (50 °C). The microstructure of the films was studied by field-emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). X-ray diffraction (XRD) analysis results showed that heat treatment at a temperature of 400 °C leads to the formation of a cubic spinel AB2O4 structure in the films. Measurements of the electrical resistance–temperature (R–T) dependence in a temperature range of 293–373 K revealed a very good negative temperature coefficient of resistance (NTC) characteristic for all annealed films. Films with a very low resistivity (ρ) of 613–831 Ω cm were obtained from solutions when x was varied in a range of 0.065–0.082, without substantially affecting the sensitivity. The difference in the electrical properties of the films was attributed to a valence state shift of manganese in accordance with the Co dopant concentration and this was also confirmed by an X–ray photoelectron spectroscopy (XPS) analysis. On the basis of their high NTC characteristic, low processing temperature, and very low specific resistivity, the NMCx thin films have a promising application in the integrated microbolometer devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Thermal Properties of Materials · Ferroelectric and Piezoelectric Materials · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. IR detection with uncooled sensors10.1016/j.infrared.2004.03.018 ↗
2. Negative temperature coefficient resistance (NTCR) ceramic thermistors: an industrial perspective10.1111/j.1551-2916.2009.02990.x ↗
3. Characterization of Mn1.56Co0.96Ni0.48O4 films for infrared detection10.1063/1.2936292 ↗
4. Sachse · 1975
5. Preparation and characterization of spinel type Mn–Ni–Co–O negative temperature coefficient ceramic thermistors10.1023/A:1004351809932 ↗
6. Studies of temperature dependent ac impedance of a negative temperature coefficient Mn–Co–Ni–O thin film thermistor10.1063/1.3596454 ↗
7. Chemical synthesis and characterization of Mn3O4 thin films for supercapacitor application10.1016/j.jallcom.2010.02.182 ↗
8. Liquid flow deposited spinel (Ni,Mn)3O4 thin films for microbolometer applications10.1016/j.apsusc.2014.12.168 ↗
9. Moulson · 2003
10. A.c. hopping conductivity in Mn–Co–Ni–Cu complex oxide semiconductors with spinel structure10.1016/0022-3697(80)90160-2 ↗
11. A Soft Solution Processing Technique for Preparing Ferrite Films and Their Applications10.1557/mrs2000.180 ↗
12. Electrical properties of copper–manganese spinel solutions and their cation valence and cation distribution10.1016/j.jpcs.2007.06.019 ↗
13. Controlled thermistor effect in the system CuxNi1–x–yCo2yMn2–yO410.1016/S0955-2219(01)00115-7 ↗
14. X-ray photoelectron spectroscopy of nickel manganese oxide thermistors10.1557/JMR.1992.1278 ↗
15. Properties of cadmium sulfide thin films deposited by chemical bath deposition with ultrasonication10.1016/S0038-092X(98)00047-4 ↗
16. Infrared detectors based on thin film thermistor of ternary Mn–Ni–Co–O on micro-machined thermal isolation structure10.1016/j.sna.2009.04.032 ↗
17. Effects of annealing temperature on microstructure and electrical properties of Mn–Co–Ni–O thin films10.1016/j.matlet.2011.03.029 ↗
18. NiMn2O4 revisited10.1016/0022-5088(89)90431-1 ↗
19. ZnO–based spinels grown by electrodeposition10.1016/j.jpcs.2012.04.002 ↗
20. Wells · 1984
21. Effect of oxygen sintering atmosphere on the electrical behavior of CCTO ceramics10.1016/j.jeurceramsoc.2011.11.039 ↗
22. Synthesis and NTC properties of YCr1−xMnxO3 ceramics sintered under nitrogen atmosphere10.1016/j.jeurceramsoc.2010.12.025 ↗
23. Resistivity, thermopower and the correlation to infrared active vibrations of Mn1.56Co0.96Ni0.48O4 spinel films sputtered in an oxygen partial pressure series10.1063/1.370760 ↗
24. New negative temperature coefficient thermistor ceramics in Mn–doped CaCu3−xMnxTi4O12 (0≤x≤1) system10.1016/j.ceramint.2014.03.165 ↗
25. The effect of Zn on the microstructure and electrical properties of Mn1.17−xNi0.93Co0.9ZnxO4 (0 ≤x≤ 0.075) NTC thermistors10.1016/j.jallcom.2007.11.105 ↗
26. Fabrication and Electrical Properties of Mn–Ni–Co–Cu–Si Oxides Negative Temperature Coefficient Thermistors10.1111/j.1551-2916.2004.00170.x ↗
27. Micro structural, electrical and optical properties of highly (220) oriented spinel Mn–Co–Ni–O film grown by radio frequency magnetron sputtering10.1016/j.apsusc.2014.05.088 ↗
28. Electron–hopping modes in NiMn2O4+δ materials10.1063/1.1866643 ↗
29. Electrical conductivity of copper and nickel manganites in relation with the simultaneous presence of Mn3+ and Mn4+ ions on octahedral sites of the spinel structure10.1016/0167-2738(92)90337-O ↗
30. Improvement in the electrical stability of Mn–Ni–Co–O NTC thermistors by substituting Cr2O3 for Co3O410.1016/j.jallcom.2006.07.070 ↗
31. Preparation and characterization of Fe3+–doped Ni0.9Co0.8Mn1.3−xFexO4 (0≤x≤0.7) negative temperature coefficient ceramic materials10.1016/j.mee.2011.04.023 ↗
32. Grain–boundary effects on the electrical resistivity and the ferromagnetic transition temperature of La0.8Ca0.2MnO310.1063/1.126908 ↗