journal article·2019-07

Strontium-modification in the stepwise solidification of A319 Al alloy: An in-situ neutron diffraction study

Eli Vandersluis, Comondore Ravindran, Dimitry Sediako, Abdallah Elsayed, Glenn Byczynski

Publisher page

Abstract

Abstract The modification of cast Al-Si alloys with trace Sr is common practice for the improvement of material properties. In addition to the typical morphological transformation of the eutectic Si particles, research has shown that Sr can significantly influence the evolution of multiple other phases that are observed in complex industrial Al alloys. In this study, the solidification sequence and characteristics of unmodified and Sr-modified A319 Al alloy was investigated using in-situ neutron diffraction to obtain a novel perspective of the mechanism of its phase transformations. Neutron diffraction intensity data was collected during stepwise alloy solidification from 630 to 200 °C. This enabled the production of fraction solid curves, isolated for the individual Al, Si, Al15(Fe,Mn)3Si2, Al5Mg8Cu2Si6, and Al2Cu phases in the alloy, which corresponded well with the curves simulated using FactSage™ software. The solidification analysis was complimented with optical and scanning electron microscopy, which revealed the production of a unique and fascinating microstructure in the Sr-modified alloy. As a result of the combined action of Sr-induced undercooling and long holding times during stepwise cooling, the Al15(Fe,Mn)3Si2 phase was completely and significantly transformed into numerous, fine, uniformly-dispersed polyhedrons. The unmodified, acicular growth of the Si particles was then enabled, by using the polyhedral phase as substrates for nucleation. Hence, no undercooling of the Al-Si eutectic reaction was observed for the Sr-modified alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Modification of eutectic silicon in Al-Si alloys10.1007/s10853-008-2505-5 ↗
2. The modification of Al-Si casting alloys: important practical and theoretical aspects
3. Effect of microstructure on the mechanical properties and fracture of commercial hypoeutectic Al-Si alloy modified with Na, Sb and Sr10.1023/A:1004626425326 ↗
4. The electrical conductivity of cast Al-Si alloys in the range 2 to 12.6 wt pct silicon10.1007/BF02653917 ↗
5. The aluminum-silicon eutectic reaction: mechanisms and crystallography10.1016/S1471-5317(02)00003-2 ↗
6. Modification of eutectic silicon in Al-Si alloys10.1007/s10853-008-2505-5 ↗
7. Functions and mechanism of modification elements in eutectic solidification of Al-Si alloys: a brief review
8. The mechanism of silicon modification in aluminium-silicon alloys: impurity induced twinning10.1007/BF02646204 ↗
9. The microstructure and crystallography of aluminium-silicon alloys10.1098/rspa.1968.0128 ↗
10. Aluminum phosphide as a eutectic nucleus in hypoeutectic Al-Si alloys10.1093/jmicro/dfh048 ↗
11. Nucleation mechanism of the eutectic phases in aluminum-silicon hypoeutectic alloys10.1016/j.actamat.2004.05.045 ↗
12. Analysis of eutectic silicon modification during solidification of Al-6Si using in-situ neutron diffraction10.1016/j.jallcom.2017.11.118 ↗
13. Crystalline-phase solidification analysis using in situ neutron diffraction10.1007/s12666-018-1418-5 ↗
14. Neutron diffraction analysis of light alloys: a review10.4028/www.scientific.net/MSF.879.1558 ↗
15. In-situ study of microstructure evolution in solidification of hypereutectic Al-Si alloys with application of thermal analysis and neutron diffraction10.1007/s11661-015-3007-0 ↗
16. Solidification analysis of an Al-19 pct Si alloy using in-situ neutron diffraction10.1007/s11661-011-0666-3 ↗
17. Eutectic nucleation in Al-Si alloys10.1016/j.actamat.2004.05.043 ↗
18. Columnar to equiaxed transition of eutectic in hypoeutectic aluminium–silicon alloys10.1016/S1359-6454(02)00081-2 ↗
19. Assessment of modification and formation of intermetallic compounds in aluminum alloy using thermal analysis10.1016/j.msea.2007.05.022 ↗
20. Effect of alloying elements on the segregation and dissolution of CuAl2 phase in Al-Si-Cu 319 alloys10.1023/A:1022857703995 ↗
21. Effect of Sr and solidification conditions on characteristics of intermetallic in Al–Si 319 industrial alloys10.1016/j.matdes.2009.06.017 ↗
22. Analysis of the solidification characteristics of a 319 type Al alloy using in-situ neutron diffraction10.1016/j.jallcom.2016.11.175 ↗
23. Estimating the effective metal-mould interfacial heat transfer coefficient via experimental-simulated cooling curve convergence10.1007/s12666-017-1259-7 ↗
24. Determination of temperature-dependent crystallographic parameters of Al–Si alloys using in situ neutron diffraction10.1107/S1600576718008737 ↗
25. Evaluation of strontium fading in 319 Al alloy using thermal analysis
26. Influence of solidification rate on the microstructure, mechanical properties, and thermal conductivity of cast A319 Al alloy10.1007/s10853-018-3109-3 ↗
27. The HighScore suite10.1017/S0885715614000840 ↗
28. Crystallization behavior of iron-containing intermetallic compounds in 319 aluminum alloy10.1007/BF02668540 ↗
29. On-line prediction of aluminum-silicon eutectic modification level using thermal analysis10.1016/S1044-5803(00)00090-5 ↗
30. The effect of strontium on the microstructure of the aluminium-silicon and aluminium-copper eutectics in the 319 aluminium alloy10.1080/13640461.1999.11819344 ↗
31. The effects of Mn additions on the microstructure and mechanical properties of Al-Si-Cu casting alloys10.1016/j.msea.2007.12.026 ↗
32. Backerud · 1990 · vol. 2
33. The effects of Fe-particles on the tensile properties of Al-Si-Cu alloys10.3390/met6120314 ↗
34. Effect of iron in Al-Si casting alloys: a critical review
35. As-cast morphology of iron-intermetallics in Al-Si foundry alloys10.1016/j.scriptamat.2005.06.028 ↗
36. Iron-containing intermetallic phases in Al-Si based casting alloys10.1016/j.mspro.2012.06.004 ↗
37. Effect of Fe-rich intermetallics on the microstructure and mechanical properties of thixoformed A380 aluminum alloy10.1016/j.jestch.2014.03.006 ↗
38. Evolution of Fe-intermetallic compounds in the semi-solid state of Al–Mg–Si–Fe alloys
39. Physical modification of intermetallic phases in Al-Si-Cu alloys10.1016/j.matchemphys.2014.09.041 ↗
40. Effect of ultrasonic treatment on formation of iron-containing intermetallic compounds in Al-Si alloys10.1007/s41230-016-5066-2 ↗
41. Gruzleski · 1990
42. Decomposition of Fe-intermetallics in Sr-modified cast 6XXX type aluminum alloys for automotive skin10.1007/s11661-001-0018-9 ↗
43. Overview of beta-Al5FeSi phase in Al-Si alloys
44. X-ray nano-diffraction study of Sr intermetallic phase during solidification of Al-Si hypoeutectic alloy10.1063/1.4865496 ↗