A comparative quality assessment of textile composite using NDT and geometrical inspection techniques
Source abstract
Abstract
One of the major challenges in textile composites is the verification of their manufacturing quality, which has large influence on the mechanical properties. Quality assessment of these composites needs to have sufficient knowledge about the various types of nondestructive techniques and their inspection. The aim of this article is to evaluate the potential of three inspection techniques named ultrasounds, vibrations, dimensional measurement for detecting textile reinforcement defects in composites. The research work was focused on two types of defects, namely fiber/yarn breakage and ply misorientation, applied to woven textiles composite produced by vacuum assistant resin transfer molding. Fabric misorientation appeared to have an influence on the dynamic behavior of the textile composite samples. Potential solutions have also been identified to solve the issue of signal attenuation caused by the fabric observed during conventional and polar ultrasonic C‐scanning. A closer look at plates surface around eliminated unit cells by coordinate measuring machine at mesoscale did not appear any specific abnormality on due to artificially induced defect. POLYM. COMPOS., 35:1818–1825, 2014. © 2014 Society of Plastics Engineers
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Optical measurement and interference techniques · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering Isfahan University of Technology Isfahan Iran
Department of Mechanical Engineering École de technologiesupérieure, 1100 Notre‐Dame Street West Montreal Que. Canada H3C 1K3
References (29)
Show source-provided references
1. Poe C. · AIAA · 1997 · 1126
2. 10.1016/j.compositesa.2009.12.00510.1016/j.compositesa.2009.12.005 ↗
3. 3d Textile Preforms And Their Inspection Using Ndt Techniques, École De Technologie Supérieure
4. 10.1115/1.166903210.1115/1.1669032 ↗
5. Kang M.K. · Compos. Part A · 2000 · 12 · 2427
6. 10.1115/1.303094410.1115/1.3030944 ↗
7. A.Nayfeh Wave Propagation in Layered Anisotropic Media With Applications to Composites Elsevier New York (1995).
8. Chimenti D. · 201110.1093/oso/9780195079609.001.0001 ↗
9. Nde of Composites Using Leaky Lamb Waves (Llw)
10. 10.1016/0961-9526(91)90029-R10.1016/0961-9526(91)90029-R ↗
11. 10.1016/0041-624X(95)00127-O10.1016/0041-624X(95)00127-O ↗
12. Dreumal V. · Mater. Evaluation · 1981 · 39 · 922
13. 10.1016/j.ultras.2006.05.21910.1016/j.ultras.2006.05.219 ↗
14. 10.1080/0934984059100321210.1080/09349840591003212 ↗
15. Nondestructive Characterization of Composite Materials, Jet Propulsion Laboratory
16. 10.1243/03093247V14204910.1243/03093247V142049 ↗
17. 10.4028/www.scientific.net/KEM.295-296.3310.4028/www.scientific.net/KEM.295-296.33 ↗
18. Żak A.J. · Key Eng. Mater. · 2005 · 203 · 60710.4028/www.scientific.net/KEM.293-294.607 ↗
19. 10.1016/0308-9126(88)90333-110.1016/0308-9126(88)90333-1 ↗
20. 10.1016/j.compositesa.2004.01.00310.1016/j.compositesa.2004.01.003 ↗
21. 10.1006/jsvi.2001.397810.1006/jsvi.2001.3978 ↗
22. 10.1016/j.compositesa.2005.03.01910.1016/j.compositesa.2005.03.019 ↗
23. 10.1177/002199830809632010.1177/0021998308096320 ↗
24. A.Salah Measurement Science Review (2008) 10 120.
25. C.Dong PhD thesis the Florida State University (2003).
26. 10.1016/S0041-624X(96)00098-410.1016/S0041-624X(96)00098-4 ↗
27. Mal A.K. · 1992 · 245
28. 10.1016/S0020-7683(02)00360-810.1016/S0020-7683(02)00360-8 ↗
29. R.Unnþórsson “Ndt Methods For Evaluating Carbon Fiber Composites ” in Proceedings ofComposites Testing and Model Identification(2004).