Development and characterization of γ/α transformable FeCrAl-ODS alloys by cobalt addition
Source abstract
Abstract
Abstract To control the microstructure of FeCrAl-ODS (oxide dispersion strengthened) alloy using γ/α transformation, the austenite-stabilizing element cobalt was added to Fe-12Cr-(3,5)Al ODS alloys at 15 and 25 wt% in accordance with the phase diagram computed using the thermodynamic analysis software FactSage. Four designed alloys were fabricated using mechanical alloying, spark plasma sintering, and final annealing at 1150 °C. Three phases were identified: matrix with bcc structure, chromium carbide, and dispersed CoAl intermetallic compound. Nanosized oxide particles were also characterized by transmission electron microscopy. As the temperature increased to 1000 °C, the 3Al-alloys with 15 or 25 wt% Co and 5Al-alloy with 25 wt% Co took α to γ transformation, whilst α-phase remained in the 5Al-alloy with 15 wt% Co. Suppression of α to γ transformation in high Al and low Co alloy was successfully explained by the reduced driving force for α to γ transformation, compared with the pinning of α/γ interfaces by oxide particles. Continuous cooling transformation curves constructed by in-situ high temperature X-ray diffraction showed that microstructure control using the γ/α phase transformation is feasible.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Accident tolerant fuels for LWRs: a perspective10.1016/j.jnucmat.2013.12.005 ↗
2. Advanced oxidation-resistant iron-based alloys for LWR fuel cladding10.1016/j.jnucmat.2013.06.041 ↗
3. Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors10.1016/j.jnucmat.2015.10.019 ↗
4. Reverse phase transformation from α to γ in 9Cr-ODS ferritic steels10.1016/j.jnucmat.2010.12.250 ↗
5. High-temperature strength characterization of advanced 9Cr-ODS ferritic steels10.1016/j.msea.2008.04.126 ↗
6. Development of 9Cr-ODS martensitic steel claddings for fuel pins by means of ferrite to austenite phase transformation10.1080/18811248.2002.9715260 ↗
7. Recrystallization texture of cold-rolled oxide dispersion strengthened ferritic steel10.2355/isijinternational.51.951 ↗
8. Development of two-step softening heat-treatment for manufacturing 12Cr-ODS ferritic steel tubes10.1080/18811248.2004.9726324 ↗
9. Characterization of high temperature creep properties in recrystallized 12Cr-ODS ferritic steel claddings10.1080/18811248.2002.9715271 ↗
10. Development of Al added high-Cr ODS steels for fuel cladding of next generation nuclear systems10.1016/j.jnucmat.2010.12.300 ↗
11. Tube manufacturing and characterization of oxide dispersion strengthened ferritic steels10.1016/S0022-3115(00)00114-8 ↗
12. Development of α/γ transformable FeCrAl-ODS alloys by Nickel addition10.2320/matertrans.M2018271 ↗
13. Mrowec · 1978 · 447
14. Development of FeCrAl-ODS steels for ATF cladding
15. Development of FeCrAl-ODS steels claddings for accident tolerant fuel of light water reactors
16. Mechanical dispersion of Y2O3 nanoparticles in steel EUROFER 97: process and optimization10.1016/S0022-3115(03)00330-1 ↗
17. Microstructural characterization of Y2O3 ODS–Fe–Cr model alloys10.1016/j.jnucmat.2008.12.136 ↗
18. Ab initio formation energies of Fe-Cr alloys10.1016/S0022-3115(03)00207-1 ↗
19. On the α-α′ miscibility gap of Fe-Cr alloys10.1016/j.scriptamat.2008.08.008 ↗
20. Phase equilibria and thermodynamic properties in the Fe-Cr system10.1080/10408431003788472 ↗
21. TEM study of PM 2000 steel10.1179/174329005X64171 ↗
22. Introduction to grains, phases, and interfaces-an interpretation of microstructure
23. Examination of the Zener relationship between grain size and particle dispersion10.2320/matertrans1989.38.950 ↗
24. Martion · 1976 · vol. 173