journal article·2020-10-01Open access

A novel clustering-based filter for impulsive noise reduction in electromagnetic tomography (EMT)

Ziqi Chen, Jorge R. Salas-Avila, Yang Tao, Wuliang Yin, Zhijie Zhang

AIP Advances· Volume 10· Issue 10

Abstract

Demodulation is a crucial step in signal processing for electromagnetic tomography (EMT) systems. Impulse noise appears in EMT, in particular, when excitation current is switched from one coil to another. This is mainly a result of the fact that the discontinuity of current creates voltage spikes due to back electromotive force. This paper proposes a novel clustering-based method for reducing this impulsive noise on the basis of Kalman filter demodulation. The Kalman filter is capable of demodulating the multiplexing signal reclusively, but it introduces dynamic oscillations at the same time. The proposed clustering method is able to successfully separate the signal from the impulse noise and smoothen the dynamic oscillations after demodulation. Simulation and experimental results show that the proposed clustering method can improve the signal-to-noise ratio by more than 20 dB in both the real and imaginary parts of EMT measurements. This technique is also useful in multi-channel coil systems where coil switching is necessary.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrical and Bioimpedance Tomography · Geophysical and Geoelectrical Methods · Geophysical Methods and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electrical and Electronic Engineering, University of Manchester 1 , Manchester M13 9PL, United Kingdom

School of Instrument and Electronics, North University of China 2 , 3 Xueyuan Road, Taiyuan 030051, China

References (22)

Show source-provided references
1. Hardware and software design for an electromagnetic induction tomography (EMT) system for high contrast metal process applications10.1088/0957-0233/17/1/018 ↗
2. The design of a FPGA-based digital magnetic induction tomography (MIT) system for metallic object imaging
3. The design of a digital magnetic induction tomography (MIT) system for metallic object imaging based on half cycle demodulation10.1109/JSEN.2011.2128866 ↗
4. An overview of electromagnetic inductance tomography: Description of three different systems10.1088/0957-0233/7/3/006 ↗
5. 2001
6. A multifrequency magnetic induction tomography system using planar gradiometers: Data collection and calibration10.1088/0967-3334/27/5/S23 ↗
7. Combining magnetic induction tomography and electromagnetic velocity tomography for water continuous multiphase flows10.1109/JSEN.2017.2758601 ↗
8. Experimental evaluation of conductive flow imaging using magnetic induction tomography10.1016/j.ijmultiphaseflow.2015.02.013 ↗
9. Design of a magnetic induction tomography system by gradiometer coils for conductive fluid imaging10.1109/ACCESS.2019.2914377 ↗
10. Development of multiple frequency electromagnetic induction systems for steel flow visualization10.1088/0957-0233/19/9/094008 ↗
11. Combined electromagnetic tomography for determining two-phase flow characteristics in the submerged entry nozzle and in the mold of a continuous casting model10.1007/s11663-011-9553-y ↗
12. Measurement system for determining the magnetic polarizability tensor of small metal targets
13. Magnetic polarizability tensor spectroscopy for low metal anti-personnel mine surrogates10.1109/JSEN.2016.2535346 ↗
14. A digital switching demodulator for electrical capacitance tomography10.1109/tim.2012.2236731 ↗
15. A recursive demodulator for real-time measurement of multiple sinusoids10.1109/JSEN.2018.2844398 ↗
16. High-speed electromagnetic train wheel inspection using a Kalman-model-based demodulation algorithm10.1109/JSEN.2019.2912225 ↗
17. Digital recursive demodulator based on Kalman filter10.1109/TIM.2017.2735660 ↗
18. A complex programmable logic device-based high-precision electrical capacitance tomography system10.1088/0957-0233/24/7/074006 ↗
19. Signal demodulation methods for electrical tomography: A review10.1109/JSEN.2019.2924908 ↗
20. Impulsive noise reduction in digital phase-sensitive demodulation by nonlinear filtering10.1088/0957-0233/26/7/075401 ↗
21. 2-D median filter-based impulsive noise reduction in multifrequency phase-sensitive demodulation of electrical impedance tomography10.1109/TIM.2019.2894049 ↗
22. Automatic feature extraction method for crack detection in eddy current testing