Fatigue behavior of AISI 8620 steel exposed to magnetic field
Source abstract
Abstract
Abstract In this study, the effect of magnetic field on AISI 8620 steel, which is commonly used in essential machinery components, was investigated in microstructural and mechanical aspects, and fatigue lifetime was finally evaluated. To prepare the steel exposed to magnetic field, cryo-cooled superconducting magnet system that generates a 10-T magnetic field was used in this study. The samples were exposed to 10-T magnetic field for 0 d, 10 d, and 20 d. The magnetic exposure induced the additional nucleation of cementite and the reduction of the compressive residual stress in the steel. This exposure resulted in extension of the fatigue lifetime by increments in yield strength, tensile strength and elongation, and the reduction of elastic modulus. This could occur because of the changes in mechanical properties induced by the additional precipitation of cementite and the relief of the compressive residual stress under magnetic field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Surface Treatment and Residual Stress · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. New structure design for 126kV HV vacuum circuit breaker10.14257/ijca.2014.7.12.01 ↗
2. Mechanical reliability of a 126 kV single-break vacuum circuit breaker
3. International surveys on circuit-breaker reliability data for substation and system studies10.1109/TPWRD.2013.2274750 ↗
4. Effects of multiple laser shock processing (LSP) impacts on mechanical properties and wear behaviors of AISI 8620 steel10.1016/j.msea.2011.12.053 ↗
5. Abrasive wear behavior of boronized AISI 8620 steel10.1016/j.wear.2009.03.006 ↗
6. Effect of case depth on fatigue performance of AISI 8620 carburized steel10.1016/S0142-1123(98)00061-9 ↗
7. The Effect of A Strong magnetic field on age-hardening of iron-chromium alloys10.1016/0022-3115(85)90164-3 ↗
8. Mechanism of residual stress reduction in low alloy steel by a low frequency alternating magnetic treatment10.1016/S1005-0302(12)60134-0 ↗
9. Low temperature superconducting magnet connected to a cryocooler by conductive link10.1109/TASC.2013.2289296 ↗
10. Design and fabrication of vibration-free cryostat for cryocooler-cooled superconducting magnet in CPS10.1109/TASC.2016.2530085 ↗
11. Influences of strong magnetic field on interdiffusion behavior between Zn and Cu and dendrite growth10.1016/j.matlet.2013.05.069 ↗
12. Atomic interdiffusion in Ni–Cu system under high magnetic field10.1016/S1003-6326(13)62755-7 ↗
13. The effect of strong magnetic field treatment on microstructure and room temperature compressive properties of NiAl-Cr(Mo)-Hf eutectic alloy10.1016/j.msea.2008.09.020 ↗
14. Strong static magnetic field processing of metallic materials: a review10.1016/j.cossms.2012.08.001 ↗
15. Magnetic modification of diamagnetic agglomerate forming powder materials10.1016/j.partic.2016.05.002 ↗
16. Effects of thermal aging on microstructures of low alloy steel-Ni base alloy dissimilar metal weld interfaces10.1016/j.jnucmat.2013.07.003 ↗
17. Fusion boundary precipitation in thermally aged dissimilar metal welds studied by atom probe tomography and nanoindentation10.1016/j.jnucmat.2015.12.047 ↗
18. Relationship between microstructure and yield strength for plain carbon steel with ultrafine or fine (ferrite+cementite) structure10.1016/j.msea.2014.08.050 ↗
19. Elucidation of the effects of cementite morphology on damage formation during monotonic and cyclic tension in binary low carbon steels using in situ characterization10.1016/j.msea.2016.05.029 ↗
20. Micromechanism of residual stress reduction by low frequency alternating magnetic field treatment10.1016/S0921-5093(01)01682-3 ↗
21. Plastic deformation caused by pulsed magnetic treatment of mid-carbon steel10.1016/j.msea.2006.12.098 ↗
22. Effects of thermal aging on the microstructure of Type-II boundaries in dissimilar metal weld joints10.1016/j.jnucmat.2015.01.009 ↗
23. Effects of aging temperature on microstructural evolution at dissimilar metal weld interfaces10.1016/j.jnucmat.2015.03.044 ↗
24. Influence of carbide precipitation and rolling direction on10.5006/1.3280670 ↗
25. Effects of residual stress on the mechanical properties of plasma-sprayed thermal barrier coatings10.1016/j.engfracmech.2013.08.016 ↗
26. Evaluation of residual stresses and mechanical properties of if steel welded joints by laser and plasma processes10.1590/1980-5373-MR-2015-0558 ↗
27. General relation between tensile strength and fatigue strength of metallic materials10.1016/j.msea.2012.11.103 ↗
28. On the relationship between elongation and fatigue life in A206-T71 aluminum castings10.1016/j.msea.2014.02.033 ↗