Effect of testing temperature on the electrochemical properties of Li(Ni0.6Mn0.2Co0.2)O2 and its Ti3C2(OH)2 modification as cathode materials for lithium-ion batteries
Source abstract
Abstract
Abstract The effects of testing temperature on the electrochemical properties of Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 are investigated in detail. When the testing temperature is 40 °C, the Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 cathode material possesses the highest initial discharge capacity of 162.4 mAh·g −1 at 0.5C rate, but their cycling stability decreases markedly. When the test temperature rises up to 60 °C, the side reaction between electrolyte and cathode material becomes serious, and the Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 cannot work. When the testing temperature decreases, the electrochemical impedances like R ct values increase, and then the discharge capacity at 0 °C, −10 °C and −20 °C is only 80%, 53% and 23% of that at 25 °C. Based on the electrochemical impedance spectra at different temperatures, four kinds of equivalent circuit models are classified. The cycle and rate performance of Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 cathode material could be improved obviously through Ti 3 C 2 (OH) 2 modification in an extreme environment, and especially in sub-zero environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · MXene and MAX Phase Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Defect chemistry in layered LiMO2 (M = Co, Ni, Mn, and Li1/3Mn2/3) by first-principles calculations
2. Surface modification of cathode materials from nano-to microscale for rechargeable lithium-ion batteries10.1039/c0jm00508h ↗
3. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x =1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
4. Optimized temperature effect of Li-Ion diffusion with layer distance in Li(NixMnyCoz)O2 cathode materials for high performance Li-ion battery10.1002/aenm.201501309 ↗
5. Nissan
6. Thermal performance of cylindrical Lithium-ion battery thermal management system based on air distribution pipe10.1016/j.ijheatmasstransfer.2018.11.116 ↗
7. Thermal and electrical performance evaluations of series connected Li-ion batteries in a pack with liquid cooling10.1016/j.applthermaleng.2017.10.029 ↗
8. Experimental examination of large capacity LiFePO4 battery pack at high temperature and rapid discharge using novel liquid cooling strategy10.1002/er.3916 ↗
9. Influence of low-temperature charge on the mechanical integrity behavior of 18650 lithium-ion battery cells subject to lateral compression10.3390/en12050797 ↗
10. Understanding the exceptional performance of lithium-ion battery cathodes in aqueous electrolytes at subzero temperatures10.1002/aenm.201802624 ↗
11. Study on LiFe1- xSmxPO4/C used as cathode materials for lithium-ion batteries with low Sm component10.1007/s11581-015-1397-z ↗
12. Temperature effects on the behavior of lithium iron phosphate electrodes10.1134/S1023193519020149 ↗
13. Degradation studies on lithium iron phosphate-graphite cells. The effect of dissimilar charging - discharging temperatures10.1016/j.electacta.2017.03.126 ↗
14. A new charging mode of Li-ion batteries with LiFePO4/C composites under low temperature10.1007/s10973-010-1038-8 ↗
15. A study on time-dependent low temperature power performance of a lithium-ion battery10.1016/j.jpowsour.2011.09.111 ↗
16. Influence of operational condition on lithium plating for commercial lithium-ion batteries-electrochemical experiments and post-mortem-analysis10.1016/j.apenergy.2017.08.034 ↗
17. Electrochemical performance and kinetics of Li1+x(Co1/3Ni1/3Mn1/3)1-xO2 cathodes and graphite anodes in low-temperature electrolytes10.1016/j.jpowsour.2006.10.106 ↗
18. The effect of charging and discharging lithium iron phosphate-graphite cells at different temperatures on degradation
19. Accelerated evolution of surface chemistry determined by temperature and cycling history in nickel-rich layered cathode materials10.1021/acsami.8b06399 ↗
20. The high-temperature and high-humidity storage behaviors and electrochemical degradation mechanism of LiNi0.6Co0.2Mn0.2O2 cathode material for lithium-ion batteries10.1016/j.jpowsour.2017.07.087 ↗
21. Structure and electrochemical properties of Yb-doped lithium iron phosphate cathode materials
22. Capacity fade of LiNi(1-x-y)CoxAlyO2 cathode for lithium-ion batteries during accelerated calendar and cycle life test. I. Comparison analysis between LiNi(1-x-y)CoxAlyO2 and LiCoO2 cathodes in cylindrical lithium-ion cells during long term storage test10.1016/j.jpowsour.2013.08.079 ↗
23. Capacity fading of Ni-rich Li[NixCoyMn1–x–y]O2 (0.6≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation10.1021/acs.chemmater.7b05269 ↗
24. Ternary-material lithium-ion battery SOC estimation under various ambient temperature10.1007/s11581-018-2444-3 ↗
25. A layered lithium-rich Li(Li0.2Ni0.15Mn0.55Co0.1)O2 cathode material: surface phase modification and enhanced electrochemical properties for lithium-ion batteries
26. A novel strategy to suppress capacity and voltage fading of Li- and Mn-rich layered oxide cathode material for lithium-ion batteries10.1002/aenm.201601066 ↗
27. Surface modification of Li-rich cathode materials for lithium-ion batteries with a PEDOT: PSS conducting polymer10.1021/acsami.6b07431 ↗
28. Constructing unique heterogeneous cobalt-manganese oxideporous microspheres as anode for long-cycle and high-rate lithium-ion batteries10.1039/C8TA09028A ↗
29. A novel strategy to significantly enhance the initial voltage and suppress voltage fading of a Li- and Mn-rich layered oxide cathode material for lithium-ion batteries10.1039/C7TA10887G ↗
30. Enhanced electrochemical performance of Li-rich cathode Li1.2Ni0.2Mn0.6O2 by surface modification with WO3 for lithium-ion batteries10.1016/j.electacta.2018.04.027 ↗
31. LATP ionic conductor and in-situ graphene hybrid-layer coating on LiFePO4 cathode material at different temperatures10.1016/j.jallcom.2018.06.289 ↗
32. Room temperature, liquid-phase Al2O3 surface coating approach for Ni-rich layered oxide cathode material10.1039/C8CC09618J ↗
33. Synthesis of Li(Ni0.6Co0.2Mn0.2)O2 with sodium DL-lactate as an eco-friendly chelating agent and its electrochemical performances for lithium-ion batteries10.1007/s11581-017-2363-8 ↗
34. Ti3C2(OH)2 coated Li(Ni0.6Co0.2Mn0.2)O2 cathode material with enhanced electrochemical properties for lithium-ion batteries10.1016/j.electacta.2018.08.085 ↗
35. Pseudo capacitive electrodes produced by oxidant-free polymerization of pyrrole between the layers of 2D titanium carbide (MXene)10.1002/adma.201504705 ↗
36. Titania nanowires functionalized polyester fabrics with enhanced photo catalytic and antibacterial performances10.1016/j.jhazmat.2017.09.044 ↗
37. The multi-substituted LiNi0.475Al0.01Cr0.04Mn1.475O3.95F0.05 cathode material with excellent rate capability and cycle life10.1016/j.electacta.2012.05.096 ↗
38. A new high power LiNi0.81Co0.1Al0.09O2 cathode material for lithium-ion batteries10.1002/aenm.201301583 ↗
39. Electrochemical performance and surface properties of bare and TiO2-coated cathode materials in lithium-ion batteries10.1021/jp046980h ↗
40. Effect of electrolyte additives on high-temperature cycling performance of spinel LiMn2O4 cathode10.1007/s10800-018-1244-9 ↗
41. Electrochemical impedance study on the low temperature of Li-ion batteries10.1016/j.electacta.2003.10.016 ↗
42. Cyclic deterioration and its improvement for Li-rich layered cathode material Li[Ni0.17Li0.2Co0.07Mn0.56]O210.1016/j.jpowsour.2009.07.052 ↗
43. Kinetic study of low temperature capacity fading in Li-ion cells10.1016/j.est.2017.07.002 ↗
44. Enhanced electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material by ultrathin ZrO2 coating10.1016/j.jallcom.2015.10.187 ↗
45. Fundamental insight into Zr modification of Li and Mn-rich cathodes: combined transmission electron microscopy and electrochemical impedance spectroscopy study10.1021/acs.chemmater.7b04861 ↗
46. Preparation and electrochemical performance of ball-like LiMn0.4Ni0.4Co0.2O2 cathode materials10.1016/j.electacta.2012.05.110 ↗
47. Enhanced electrochemical performance of dual-conductive layers coated Ni-rich Li Ni0.6Co0.2Mn0.2O2 cathode for Li-ion batteries at high cut-off voltage10.1016/j.electacta.2018.08.091 ↗
48. Low-temperature characterization of lithium-ion carbon anodes via microperturbation measurement10.1149/1.1474427 ↗
49. The low temperature performance of Li-ion batteries10.1016/S0378-7753(02)00618-3 ↗
50. Synthesis of porous Co3O4 nano flake array and its temperature behavior as pseudo-capacitor electrode10.1016/j.jpowsour.2014.01.073 ↗
51. Thermal stability of solid electrolyte interphase of lithium-ion batteries10.1016/j.apsusc.2018.05.136 ↗
52. AC impedance and dielectric relaxation study on the effects of the excess Pb introduced in La2Mo2O9 oxide-ion conductors10.1002/pssa.200306654 ↗
53. Electrochemical investigation of the chemical diffusion, partial ionic conductivities, and other kinetic parameters in Li3Sb and Li3Bi10.1016/0022-4596(77)90006-8 ↗
54. Combustion synthesis and electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 with improved rate capability10.1016/j.jpowsour.2012.11.091 ↗
55. Low temperature performance of LiFePO4/C cathode in a quaternary carbonate-based electrolyte10.1016/j.elecom.2008.02.017 ↗
56. Low temperature performance of graphite and LiNi0.6Co0.2Mn0.2O2 electrodes in Li-ion batteries10.1007/s10853-014-8479-6 ↗
57. High-capacitance mechanism for Ti3C2Tx MXene by in situ electrochemical Raman spectroscopy investigation10.1021/acsnano.6b06597 ↗
58. Inherent electrochemistry and charge transfer properties of few-layer two dimensional Ti3C2Tx MXene10.1039/C8NR01883A ↗