journal article·2020-05

Facile preparation of Fe3O4/MoS4 for ultra fast and highly selective uptake towards Hg2+, Pb2+ and Ag+

Jian Li, Linxia Xie, Rong Guo, Hui Wang, Zupei Liang, Huiqin Yao, Shulan Ma

Publisher page

Abstract

Abstract We demonstrate the newly prepared magnetite/molybdenum sulfide (Fe3O4/MoS4) composite reacted from protonated Fe3O4 and MoS42– and its highly selective and ultra rapid uptake for Ag+, Pb2+ and Hg2+. The Fe3O4/MoS4 can separate Hg2+, Ag+ and Pb2+ from complex metal mixtures with high selectivity (order is Hg2+>Ag+>Pb2+>>Co2+/Ni2+/Cu2+/Zn2+/Cd2+), which is extremely difficult to do with other materials. The maximum adsorption capacities (qm) for Ag+ and Pb2+ reach up to 546.6 and 101.6 mg/g, respectively, determining an obvious advantage over most known sorbents. Fast sorption kinetics of Pb2+, Hg2+ and Ag+ is found, achieving nearly complete uptake (>99.99%) and very large Kd (106–107 mL/g) within 1–5 min. Sharply reduced concentrations ( 99.9%) over a wide pH range (2.5–7.0 for Ag+, 4.5–6.0 for Pb2+). High loading of MoS42- upon Fe3O4 (MoS4:Fe3O4 molar ratio is 1:2) and strong affinity between material interfaces and metal ions endow the appealing trapping capability and ultrahigh selectivity. Thanks to the ultra fast and outstanding selectivity, the Fe3O4/MoS4 is expected to be one of top materials for removing heavy metals in wastewater.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adsorption and biosorption for pollutant removal · Advanced Photocatalysis Techniques · Analytical chemistry methods development

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Removal of heavy metal ions from wastewaters: a review
2. Facile self-assembly synthesis of titanate/Fe3O4 nanocomposites for the efficient removal of Pb2+ from aqueous systems10.1039/C2TA00099G ↗
3. Functionalized novel mesoporous adsorbent for selective lead(II) ions monitoring and removal from wastewater10.1016/j.snb.2014.07.063 ↗
4. Adsorption of Pb(II) and Cd(II) from aqueous solutions using titanate nanotubes prepared via hydrothermal method10.1016/j.jhazmat.2011.03.006 ↗
5. Removal of Pb(II) ions from aqueous solution by adsorption using bael leaves (Aegle marmelos)10.1016/j.jhazmat.2009.08.113 ↗
6. Highly selective and efficient removal of heavy metals by layered double hydroxide intercalated with the MoS42– ion10.1021/jacs.6b00110 ↗
7. Highly selective adsorption of Hg2+ by a polypyrrole–reduced graphene oxide composite10.1039/c1cc00005e ↗
8. Removal of heavy metal ions by magnetic chitosan nanoparticles prepared continuously via high-gravity reactive precipitation method, Carbohyd
9. Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: adsorption behavior and process study10.1016/j.cej.2016.07.003 ↗
10. Quantitative assessment of worldwide contamination of air, water and soils by trace-metals10.1038/333134a0 ↗
11. Process development for the removal of lead and chromium from aqueous solutions using red mud-an aluminium industry waste10.1016/S0043-1354(00)00389-4 ↗
12. Immobilization of mercury by carboxymethyl cellulose stabilized iron sulfide nanoparticles: reaction mechanisms and effects of stabilizer and water chemistry10.1021/es404418a ↗
13. Adsorption of mercury(II) from aqueous solutions using FeS and pyrite: a comparative study10.1016/j.chemosphere.2017.07.047 ↗
14. USEPA
15. Adsorption of Ag+ by a surface molecular-imprinted biosorbent10.1016/j.cej.2008.12.014 ↗
16. Fast and selective removal of silver(I) from aqueous media by modified chitosan resins10.1016/j.minpro.2013.02.007 ↗
17. Sources of silver in the environment10.1002/etc.5620170404 ↗
18. Recovery of silver from X-ray film processing effluents using trimercapto-s-triazine (TMT)10.1080/01496395.2011.595032 ↗
19. Removal of noble metal ions (Ag+) by mercapto group-containing polypyrrole matrix and reusability of its waste material in environmental applications10.1021/acssuschemeng.6b03008 ↗
20. Adsorption of Ag+ ions on hydrolyzed lignocellulosic materials based on willow, paulownia, wheat straw and maize stalks10.1007/s13762-016-0970-y ↗
21. Novel lignin–poly(n-methylaniline) composite sorbent for silver ion removal and recovery10.1021/sc400475r ↗
22. Adsorption of Cu(II), Pb(II) and humic acid on natural zeolite tuff in single and binary systems10.1016/j.seppur.2008.01.004 ↗
23. Magnetic Fe3O4-FeS nanocomposites with promoted Cr(VI) removal performance10.1016/j.cej.2015.09.053 ↗
24. Comparative studies of removal of Cr(VI) and Ni(II) from aqueous solutions by magnetic nanoparticles10.1021/je100428z ↗
25. Water-dispersible magnetic nanoparticle-graphene oxide composites for selenium removal10.1016/j.carbon.2014.05.076 ↗
26. Recyclable naturally derived magnetic pyrrhotite for elemental mercury recovery from flue gas10.1021/acs.est.6b03288 ↗
27. Coating Fe3O4 magnetic nanoparticles with humic acid for high efficient removal of heavy metals in water10.1021/es800924c ↗
28. The effect of humic acid adsorption on pH-dependent surface charging and aggregation of magnetite nanoparticles10.1016/j.jcis.2005.08.003 ↗
29. Recent progress and future challenges on the use of high performance magnetic nano-adsorbents in environmental applications10.1016/j.cej.2014.06.119 ↗
30. Chemical states in XPS and Raman analysis during removal of Cr(VI) from contaminated water by mixed maghemite–magnetite nanoparticles10.1016/j.jhazmat.2012.07.054 ↗
31. Intercalation of macrocyclic crown ether into well-crystallized LDH: formation of staging structure and secondary host-guest reaction10.1021/cm9007393 ↗
32. Nanocage structure derived from sulfonated β-cyclodextrin intercalated layered double hydroxides and selective adsorption for phenol compounds10.1021/ic402494m ↗
33. A new, low-cost adsorbent: preparation, characterization, and adsorption behavior of Pb(II) and Cu(II)10.1016/j.jcis.2014.12.099 ↗
34. Intercalation of thiacalix[4]arene anion via calcined/restored reaction into LDH and efficient heavy metal capture10.1016/j.molliq.2016.04.103 ↗
35. Water-n-BuOH solvothermal synthesis of ZnAl-LDHs with different morphologies and its calcined product in efficient dyes removal10.1016/j.jcis.2017.01.079 ↗
36. Highly selective and efficient heavy metal capture with polysulfide intercalated layered double hydroxides10.1039/C4TA01203H ↗
37. Efficient Hg vapor capture with polysulfide intercalated layered double hydroxides10.1021/cm5020477 ↗
38. Highly efficient iodine capture by layered double hydroxides intercalated with polysulfides10.1021/cm5036997 ↗
39. Efficient uranium capture by polysulfide/layered double hydroxide composites10.1021/jacs.5b00762 ↗
40. Selective and efficient removal of toxic oxoanions of As(III), As(V), and Cr(VI) by layered double hydroxide intercalated with MoS42–10.1021/acs.chemmater.7b00618 ↗
41. Rapid simultaneous removal of toxic anions [HSeO3]−, [SeO3]2–, and [SeO4]2–, and metals Hg2+, Cu2+, and Cd2+ by MoS42– intercalated layered double hydroxide10.1021/jacs.7b07123 ↗
42. Remarkable acid stability of polypyrrole-MoS4: a highly selective and efficient scavenger of heavy metals over a wide pH range10.1002/adfm.201800502 ↗
43. Synthesis and application of TiO2/SiO2/Fe3O4 nanoparticles as novel adsorbent for removal of Cd(II), Hg(II) and Ni(II) ions from water samples10.1007/s10098-017-1374-5 ↗
44. Fe3O4–graphene nanocomposites with improved lithium storage and magnetism properties10.1021/jp201666s ↗
45. Synthesis of nearly monodisperse iron oxide and oxyhydroxide nanocrystals10.1002/adfm.200500884 ↗
46. Dispersedly embedded loading of Fe3O4 nanoparticles into graphene nanosheets for highly efficient and recyclable removal of heavy metal ions10.1039/C5NJ00897B ↗
47. Modifying Fe3O4 microspheres with rhodamine hydrazide for selective detection and removal of Hg2+ ion in water10.1016/j.jhazmat.2012.10.050 ↗
48. Nanoscale zerovalent iron decorated on graphene nanosheets for Cr(VI) removal from aqueous solution: surface corrosion retard induced the enhanced performance10.1016/j.cej.2015.12.022 ↗
49. Effect of synthesis parameters on the characteristics of Fe-B nanoalloys for dehydrogenation of ethanol10.1021/ie061552e ↗
50. Synthesis of reduced graphene oxide-iron nanoparticles with superior enzyme-mimetic activity for biosensing application10.1016/j.jallcom.2015.03.176 ↗
51. 3D graphene/delta-MnO2 aerogels for highly efficient and reversible removal of heavy metal ions10.1039/C5TA08106H ↗
52. Catalytic activities of sulfur atoms in amorphous molybdenum sulfide for the electrochemical hydrogen evolution reaction10.1021/acscatal.5b02369 ↗
53. MoS42- cluster bridges in Co-Fe layered double hydroxides for mercury uptake from S-Hg mixed flue gas10.1021/acs.est.7b02537 ↗
54. High-temperature desulfurization of hot coal gas on Mo modified Mn/KIT-1 sorbents10.1016/j.cej.2015.02.091 ↗
55. Hydrodeoxygenation of benzofuran over sulfided and reduced Ni-Mo/gamma-Al2O3 catalysts: effect of H2S10.1016/j.molcata.2007.02.006 ↗
56. XPS and XAS study of the sorption of Hg(II) onto pyrite10.1021/la0014510 ↗
57. XPS study of the sorption of Hg(II) onto pyrite FeS210.1002/1096-9918(200008)30:1<269::AID-SIA758>3.0.CO;2-N ↗
58. Reactivity and kinetic studies of (NH4)2MoS4 in acidic aqueous solution: possible relevance to the angiostatic function of the MoS42- ligand10.1016/j.jinorgbio.2008.09.015 ↗
59. 3D graphene-encapsulated hierarchical urchin-like Fe3O4 porous particles with enhanced lithium storage properties10.1016/j.cej.2017.06.147 ↗
60. Superparamagnetic Fe3O4@EDTA nanoparticles as an efficient adsorbent for simultaneous removal of Ag(I), Hg(II), Mn(II), Zn(II), Pb(II) and Cd(II) from water and soil environmental samples10.1016/j.microc.2016.11.011 ↗
61. Synthesis, characterization, and silver adsorption property of magnetic cellulose xanthate from acidic solution: prepared by one step and biogenic approach10.1021/ie501989q ↗
62. Direct Eextraction of Ag+ and Hg2+ from cyanide complexes and mode of binding by the layered K2MgSn2S6 (KMS-2)10.1021/acs.chemmater.5b00374 ↗
63. High efficient removal of Pb (II) by amino-functionalized Fe3O4 magnetic nano-particles10.1016/j.cej.2012.02.075 ↗
64. Magnetic chitosan nanocomposites: a useful recyclable tool for heavy metal ion removal10.1021/la802754t ↗
65. Fe3O4/cyclodextrin polymer nanocomposites for selective heavy metals removal from industrial wastewater10.1016/j.carbpol.2012.08.030 ↗
66. Gum kondagogu modified magnetic nano-adsorbent: an efficient protocol for removal of various toxic metal ions10.1016/j.msec.2011.12.015 ↗
67. The adsorption of gases on plane surfaces of glass, mica and platinum10.1021/ja02242a004 ↗
68. Pore and solid diffusion models for fixed-bed adsorbers10.1002/aic.690200204 ↗
69. Kinetic models of sorption: a theoretical analysis10.1016/j.jcis.2004.03.048 ↗
70. Prediction strategy of adsorption equilibrium time based on equilibrium and kinetic results to isolate taxifolin10.1021/ie201197r ↗
71. The pH-dependent surface charging and points of zero charge: V. Update10.1016/j.jcis.2010.08.023 ↗
72. Novel mesoporous Fe3O4/SiO2/CTAB-SiO2 as an effective adsorbent for the removal of amoxicillin and tetracycline from water10.1007/s10098-018-1507-5 ↗
73. Cerium dioxide nanoparticles decorated on CuFe2O4 nanofibers as an effective adsorbent for removal of estrogenic contaminants (bisphenol A and 17-alpha ethinylestradiol) from water10.1080/01496395.2018.1457053 ↗
74. Synthesis and application of nanocomposite Fe3O4@SiO2@CTAB–SiO2 as a novel adsorbent for removal of cyclophosphamide from water samples10.1080/01496395.2019.1566262 ↗
75. An efficient nanostructured Ag2S-ZnO for degradation of Acid Black 1 dye under day light illumination10.1016/j.seppur.2012.06.002 ↗
76. AgBr-ZnO-An efficient nano-photocatalyst for the mineralization of Acid Black 1 with UV light10.1016/j.seppur.2011.09.037 ↗