journal article·2021-01

Study on microstructure and properties of TiBw/Ti-V-Al light weight high temperature shape memory composite

Kuishan Sun, Xiaoyang Yi, Bin Sun, Xianglong Meng, Zhiyong Gao, Wei Cai

Publisher page

Abstract

Abstract This study investigated a novel light weight high temperature shape memory composite with a quasi-continuous network microstructure, which greatly promoted to the application of shape memory alloy in aerospace. In-situ TiB whisker was introduced and mainly distributed along the large Ti-V-Al matrix, which contributed to the breakthrough of the mechanical properties. No obvious influence on the martensite structure, and the spear-like martensite variants still exhibited the typical self-accommodation morphology with {011} type I twin relationship. The XRD results showed that the phase constitution gradually evolved from sole α″ phase to the coexistence of the α″ phase and β phase with the increasing of TiB2 contents. The reverse martensitic transformation peak temperature increased firstly and then decreased with the increasing of TiB2 contents, owing to the influence of composition variation and stress field. It was noteworthy that the TiBw/Ti-V-Al composite with 2.0 wt% TiB2 addition exhibited a higher strength, accompanied by the superior elongation (15.7%) and high martensitic transformation temperature. The yield strength and fracture strength were 692 MPa and 932 MPa, respectively. In addition, the shape memory effect increased firstly and then decreased with the increasing of the TiB2 contents. The maximum recoverable strain of 4.4% with 6% pre-strain can be gained in 0.3 wt%TiB2 added Ti-V-Al composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
2. Porous NiTi for bone implants: a review10.1016/j.actbio.2008.02.009 ↗
3. High temperature shape memory alloys10.1179/095066010X12646898728363 ↗
4. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
5. NiTiHf-based shape memory alloys10.1179/1743284714Y.0000000598 ↗
6. Deformation twinning in the full-α martensitic Ti-25Ta-20Nb shape memory alloy10.1016/j.actamat.2015.12.001 ↗
7. Study on the deformation mechanism of the martensitic Ti–16Nb high temperature shape memory alloy
8. Role of Microstructure on the actuation fatigue performance of Ni-Rich NiTiHf high temperature shape memory alloys10.1016/j.actamat.2019.05.051 ↗
9. TEM study of structural and microstructural characteristics of a precipitate phase in Ni-rich Ni–Ti–Hf and Ni–Ti–Zr shape memory alloys10.1016/j.actamat.2013.06.057 ↗
10. Mechanical and functional behavior of high-temperature Ni-Ti-Pt shape memory alloys10.1007/s11661-016-3324-y ↗
11. The investigation of the mechanical properties of graded high-temperature shape memory Ti-Ni-Pd alloy10.1016/j.jallcom.2019.02.142 ↗
12. Microstructural evolution of martensite during deformation in Zr 50 Cu 50 shape memory alloy10.1016/j.actamat.2017.04.045 ↗
13. Combinatorial synthesis of Ni–Mn–Ga-(Fe,Co,Cu) high temperature ferromagnetic shape memory alloys thin films10.1016/j.scriptamat.2019.10.043 ↗
14. Martensitic transformation and shape memory effects in Co-V-Al alloys at high temperatures10.1016/j.jallcom.2019.01.216 ↗
15. Martensitic transformation and shape memory effect of Ti-V-Al lightweight high-temperature shape memory alloys10.1016/j.scriptamat.2014.11.038 ↗
16. Shape memory behavior of Ti-V-Al alloys
17. Wayman C.M., Microstructures of athermal and stress-induced martensites of Ti-V-Al shape memory alloys
18. Martensitic transformation and shape memory behavior of Ti-V-Al-Fe lightweight shape memory alloys10.1016/j.jallcom.2016.04.151 ↗
19. Microstructure and mechanical properties of Ti-V-Al-Cu shape memory alloy by tailoring Cu content10.1016/j.msea.2019.138641 ↗
20. The microstructural characteristics and high temperature mechanical properties of quaternary Ti–V–Al–Co shape memory alloys10.1016/j.jallcom.2020.155416 ↗
21. Effects of thermomechanical treatment on microstructure and shape memory effect of Ti–13V–3Al lightweight shape memory alloy10.1016/j.msea.2015.12.049 ↗
22. Review and perspectives: shape memory alloy composite systems10.1007/s00707-015-1433-0 ↗
23. In situ synchrotron high-energy X-ray diffraction study of microscopic deformation behavior of a hard-soft dual phase composite containing phase transforming matrix10.1016/j.actamat.2017.03.052 ↗
24. On the effect of TiC particles on the tensile properties and on the intrinsic two way effect of NiTi shape memory alloys produced by powder metallurgy10.1016/S0921-5093(99)00308-1 ↗
25. Materials science. The future of metals,10.1126/science.1185866 ↗
26. Larger strain recovery characteristics of Ti-Ni-Hf shape memory alloy composite under compression10.1016/j.scriptamat.2018.05.006 ↗
27. Fabrication, characterization and potential application of larger bulk Ti-Ni-Hf high temperature shape memory alloy composite reinforced by hybrid particles10.1016/j.jallcom.2018.06.084 ↗
28. Microstructure design of the excellent shape recovery properties in (Ti,Hf)2Ni/Ti-Ni-Hf high temperature shape memory alloy composite10.1016/j.jallcom.2017.09.242 ↗
29. Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix composites10.1016/j.compscitech.2007.07.016 ↗
30. Tailoring a novel network reinforcement architecture exploiting superior tensile properties of in situ TiBw/Ti composites10.1016/j.msea.2012.03.019 ↗
31. Fabrication of NiTi and NiTi-nano Al2O3 composites by powder metallurgy methods: comparison of hot isostatic pressing and spark plasma sintering techniques10.1016/j.ceramint.2018.06.025 ↗
32. Nano-sized SiC particle reinforced NiTi alloy matrix shape memory composite10.1016/j.matlet.2013.02.113 ↗
33. Fabrication of Ti–Nb alloys by powder metallurgy process and their shape memory characteristics10.1016/j.jallcom.2011.12.166 ↗
34. In situ technique for synthesizing (TiB + TiC)/Ti composites10.1016/S1359-6462(99)00087-1 ↗
35. Microstructure and tensile properties of in situ synthesized (TiBw + TiCp)/Ti6242 composites10.1023/A:1017917631855 ↗
36. Effect of cold work and partial annealing on thermomechanical behaviour of Ti-50.5at%Ni10.1007/s40830-017-0103-6 ↗
37. Microstructural characterization of HIP consolidated NiTi–nano Al2O3 composites10.1016/j.jallcom.2014.03.184 ↗
38. Effects of Nb and Zr on structural stabilities of Ti-Mo-Sn-based alloys with low modulus10.1016/j.msea.2017.01.047 ↗
39. Strengthening behavior of in situ -synthesized (TiC-TiB)/Ti composites by powder metallurgy and hot extrusion10.1016/j.matdes.2016.01.092 ↗
40. Shulin, X. Duan, P. An, Preparation of in-situ 5 vol% TiB2, particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process10.1016/j.matdes.2016.01.023 ↗