journal article·2020-11

Nitrogen/chlorine-doped carbon nanodisk-encapsulated hematite nanoparticles for high-performance lithium-ion storage

Yajuan Li, Tianchen Xia, Tingting Yu, Yingchun Miao, Meng Yang, Xiangyu Zhao, Liqun Ma

Publisher page

Abstract

Abstract Iron oxide (Fe2O3) is an intriguing anode material of electrochemical energy storage systems such as rechargeable batteries. The rational design of its nanostructure at mild condition to cope with the issues of low reversible capacity and sluggish kinetics is required. Herein, an efficient, facile, and potentially large-scale synthesis approach using the precursor of laminated iron oxychloride@polyaniline heterostructure and mild annealing is developed, yielding unique Fe2O3@carbon nanocomposites with hematite nanoparticles (∼20 nm) that embedded in nitrogen/chlorine-doped carbon nanodisk (N/Cl–C). Given the benefit of abundant active sites, good chemical contact between carbon and Fe2O3, and robust composite structure, the as-prepared Fe2O3@N/Cl–C anode material delivers competent lithium-ion storage properties, including high reversible capacity of 1010 mAh g−1 (based on the mass of the as-prepared nanocomposite) at 0.1 A g−1, decent rate performance upon a rigorous current change, and superior cycling stability with 955 mAh g−1 after 180 cycles as well as a sustained Coulombic efficiency of about 99%. This structural design may provide a new avenue for achieving efficient iron oxide-based materials in chemical and electrochemical applications such as catalysis, lithium-ion batteries, and sodium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Effects of initial crystal structure of Fe2O3 and Mn promoter on effective active phase for syngas to light olefins10.1016/j.apcatb.2019.118219 ↗
2. Superparamagnetic graphene oxide–Fe3O4 nanoparticles hybrid for controlled targeted drug carriers10.1039/b821416f ↗
3. Visible-light-driven N-TiO2@SiO2@Fe3O4 magnetic nanophotocatalysts: synthesis, characterization, and photocatalytic degradation of PPCPs10.1016/j.jhazmat.2017.07.048 ↗
4. Fe2O3 nanotube coating micro-fiber interferometer for ammonia detection10.1016/j.snb.2019.127186 ↗
5. Rational design and controllable synthesis of multishelled Fe2O3@SnO2@C nanotubes as advanced anode material for lithium-/sodium-ion batteries10.1021/acsami.9b12012 ↗
6. α-Fe2O3 Nanoparticles decorated C@MoS2 nanosheet arrays with expanded spacing of (002) plane for ultrafast and high Li/Na-ion storage10.1002/smll.201901083 ↗
7. FeOx-based materials for electrochemical energy storage10.1002/advs.201700986 ↗
8. Conversion Reaction-based oxide nanomaterials for lithium ion battery anodes10.1002/smll.201502299 ↗
9. The critical role of carbon in marrying silicon and graphite anodes for high-energy lithium-ion batteries10.1002/cey2.2 ↗
10. Supersonically blown reduced graphene oxide loaded Fee Fe3C nanofibers for lithium ion battery anodes10.1016/j.jallcom.2017.07.306 ↗
11. Fe3C/nitrogen-doped carbon nanofibers as highly efficient biocatalyst with oxidase-mimicking activity for colorimetric sensing10.1021/acssuschemeng.8b04036 ↗
12. Fe3C-doped asymmetric porous carbon membrane binder-free integrated materials as high performance anodes of lithium-ion batteries10.1016/j.cej.2019.02.199 ↗
13. Boosted crystalline/amorphous Fe2O3-δ core/shell heterostructure for flexible solid-state pseudocapacitors in large scale10.1016/j.nanoen.2018.01.015 ↗
14. A New Strategy to Effectively Suppress the initial capacity fading of iron oxides by reacting with LiBH410.1002/adfm.201700342 ↗
15. Thermal induced strain relaxation of 1D iron oxide for solid electrolyte interphase control and lithium storage improvement10.1002/aenm.201601582 ↗
16. Hydrothermal synthesis and characterization of α-Fe2O3/C using acid-pickled iron oxide red for Li-ion batteries10.1016/j.jhazmat.2019.01.106 ↗
17. Robust erythrocyte-like Fe2O3@carbon with yolk-shell structures as high performance anode for lithium ion batteries10.1016/j.cej.2018.04.119 ↗
18. Porous Fe2O3 Nanoframeworks Encapsulated within three-dimensional graphene as high-performance flexible anode for lithium-ion battery10.1021/acsnano.7b02198 ↗
19. Highly efficient sodium storage in iron oxide nanotube arrays enabled by built-in electric field10.1002/adma.201902603 ↗
20. Dual-doped hematite nanorod arrays on carbon cloth as a robust and flexible sodium anode10.1002/adfm.201910043 ↗
21. Design and synthesis of bubble-nanorod-structured Fe2O3–carbon nanofibers as advanced anode material for Li-ion batteries10.1021/acsnano.5b00088 ↗
22. High performance columnar-like Fe2O3@carbon composite anode via yolk@shell structural design10.1016/j.jechem.2019.05.009 ↗
23. Metal oxychlorides as cathode materials for chloride ion batteries10.1002/anie.201307314 ↗
24. Nanoconfined iron oxychloride material as a high-performance cathode for rechargeable chloride ion batteries10.1021/acsenergylett.7b00699 ↗
25. Reaction of aniline with FeOCl. Formation and ordering of conducting polyaniline in a crystalline layered host10.1021/ja00141a015 ↗
26. Synthesis of polyaniline-intercalated layered materials via exchange reaction10.1039/b107436a ↗
27. In situ polymerization/intercalation of substituted anilines into iron (III) oxychloride10.1016/j.ssi.2010.05.015 ↗
28. Polyaniline-intercalated FeOCl cathode material for chloride-ion batteries10.1002/celc.201801803 ↗
29. Thermal analysis of conducting polymers part .I. Thermogravimetry of acid-doped polyanilines10.1007/BF02057231 ↗
30. Thermal decomposition of iron oxychloride as studied by thermal analysis, X-ray diffraction and Mössbauer spectroscopy10.1016/S0254-0584(02)00449-2 ↗
31. The carbonization of granular polyaniline to produce nitrogen-containing carbon10.1016/j.synthmet.2011.03.034 ↗
32. Surfactant carbonization to synthesize pseudocubic α-Fe2O3/C nanocomposite and its electrochemical performance in lithium-ion batteries10.1016/j.electacta.2011.04.002 ↗
33. Evolution of Polyaniline Nanotubes: the oxidation of aniline in water10.1021/jp057528g ↗
34. The carbonization of thin polyaniline films10.1016/j.tsf.2012.05.067 ↗
35. Twin carbons: the carbonization of cellulose or carbonized cellulose coated with a conducting polymer, polyaniline10.1016/j.carbon.2016.08.061 ↗
36. Chlorine-doped reduced graphene oxide nanosheets as an efficient and stable electrode for supercapacitor in acidic medium10.1016/j.jcis.2016.06.058 ↗
37. The generation of hydroxyl radicals by hydrogen peroxide decomposition on FeOCl/SBA-15 catalysts for phenol degradation10.1002/aic.14625 ↗
38. Self-stacked multilayer FeOCl supported on a cellulose-derived carbon aerogel: a new and high-performance anode material for Supercapacitors10.1039/C8TA12261J ↗
39. Peculiar porous α-Fe2O3, γ-Fe2O3 and Fe3O4 nanospheres: facile synthesis and electromagnetic properties10.1016/j.powtec.2014.09.045 ↗
40. Design and synthesis of carbon-coated α-Fe2O3@Fe3O4 heterostructured as anode materials for lithium ion batteries10.1016/j.apsusc.2019.143590 ↗
41. Use of Raman scattering to investigate disorder and crystallite formation in as-deposited and anriealed carbon films10.1103/PhysRevB.29.3482 ↗
42. Structure–conductivity relationships of iodine-doped polyaniline10.1002/(SICI)1099-0488(19970930)35:13<1993::AID-POLB1>3.0.CO;2-O ↗
43. Comparative XPS surface study of polyaniline thin films10.1016/j.ssi.2008.08.004 ↗
44. Hierarchical porous and N-doped carbon nanotubes derived from polyaniline for electrode materials in supercapacitors10.1039/C4TA01465K ↗
45. On the nature of surface acid sites of chlorinated activated carbons10.1016/S0008-6223(02)00353-6 ↗
46. Effects of graphene quality on lithium storage performances of Fe3O4/thermally reduced graphene oxide hybrid anodes10.1002/celc.201900015 ↗
47. Comparative XPS surface study of polyaniline thin films10.1016/j.ssi.2008.08.004 ↗
48. Ultrathin MoSe2@N-doped carbon composite nanospheres for stable Na-ion storage10.1088/1361-6528/aa8c55 ↗
49. Superior capacitive and electrocatalytic properties of carbonized nanostructured polyaniline upon a low-temperature hydrothermal treatment10.1016/j.carbon.2013.07.100 ↗
50. Structure and properties of polyaniline nanocomposite coatings containing gold nanoparticles formed by low-energy electron beam deposition10.1016/j.apsusc.2017.09.225 ↗
51. Conjugated conducting polymers PANI decorated Bi12O17Cl2 photocatalyst with extended light response range and enhanced photoactivity10.1016/j.apsusc.2018.09.103 ↗
52. An all-solid-state rechargeable chloride ion battery
53. Implanting niobium carbide into trichoderma spore carbon: a new advanced host for sulfur cathodes10.1002/adma.201900009 ↗
54. Edge-selectively halogenated graphene nanoplatelets (XGnPs, X = Cl, Br, or I) prepared by ball-milling and used as anode materials for lithium-ion batteries10.1002/adma.201402987 ↗
55. Edge-halogenated graphene nanoplatelets with F, Cl, or Br as electrocatalysts for all-vanadium redox flow batteries10.1016/j.nanoen.2016.05.027 ↗
56. Biomimetic spider-web-Like composites for enhanced rate capability and cycle life of lithium ion battery anodes10.1002/aenm.201700331 ↗
57. Controlling the valence state of Cu dopant in α-Fe2O3 anodes: effects on crystal structure and the conversion reactions with alkali ions10.1021/acs.chemmater.8b03977 ↗
58. Sulfur-doped amorphous NiMoO4 on crystalline Fe2O3 nanorods for enhanced lithium storage Performance10.1039/C8TA08938H ↗
59. Scalable dry production process of a superior 3D net-like carbon-based iron oxide anode material for lithium-ion batteries10.1002/anie.201707647 ↗
60. Rationally designed hierarchical TiO2@Fe2O3 hollow nanostructures for improved lithium ion storage10.1002/aenm.201200953 ↗
61. Electrospun Fe2O3–carbon composite nanofibers as durable anode materials for lithium ion batteries10.1039/c3ta15123a ↗