journal article·2021-11

Impact-induced twinning and phase transition in a medium carbon steel

K. Yang, C. Li, X.J. Zhao, Y.X. Liang, S.N. Luo, Y. Cai

Publisher page

Abstract

Abstract Deformation twinning in a medium carbon steel containing ferrite and pearlite under shock compression is investigated below and above the α–e phase transition stress (σT), within a peak stress range of 10–20 GPa. Free surface velocity histories are measured to obtain the Hugoniot elastic limit (2.7 GPa), σT (13.3 GPa) and bulk plastic strain. Postmortem samples are characterized with electron backscatter diffraction and transmission electron microscopy. Below σT, all the {112}〈111〉 twinning activation in ferrite and pearlite follows the Schmid law, while above σT, approximately 1/6 of the activation deviates from the law. Propagation of the {112}〈111〉 twins in pearlite depends on the orientation of the activated twinning plane relative to cementite lamellae. With increasing peak stress, the {112}〈111〉 twin area fraction in ferrite/pearlite increases greatly/slightly; the {112}〈111〉 twin area fraction in ferrite is about 7 times that of pearlite. The {332}〈113〉 twins can only form above σT, favoring ferrite over pearlite, and are likely to be the secondary twins originated at the {112}〈111〉 twin boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Meyers · 1994
2. Davison · 1997
3. Twin nucleation in cold rolled low carbon steel subjected to plate impacts10.1016/j.msea.2016.12.086 ↗
4. Analysis of the variation in nanohardness of pearlitic steel: influence of the interplay between ferrite crystal orientation and cementite morphology10.1016/j.msea.2014.08.019 ↗
5. Analysis of the deformation and damage mechanisms of pearlitic steel by EBSD and “in-situ” SEM tensile tests10.1007/s11665-015-1537-7 ↗
6. Relationship between microstructure and strength in eutectoid steels10.1016/j.msea.2004.01.084 ↗
7. Microtwinning as a common mechanism for the martensitic and pearlitic transformations10.1016/j.jallcom.2011.10.102 ↗
8. Microstructural characterization and formation mechanism of abnormal segregation band of hot rolled ferrite/pearlite steel10.1016/j.jallcom.2015.05.128 ↗
9. Meyers · 2012
10. Callister · 2012
11. Microstructure-property relationships in pearlitic eutectoid and hypereutectoid carbon steels10.1007/BF02700982 ↗
12. Influence of ferrite and pearlite content on mechanical properties of ductile cast irons10.1016/j.msea.2012.12.089 ↗
13. Influence of deformation substructure on flow and fracture of fully pearlitic steel10.1016/0001-6160(88)90008-9 ↗
14. The effect of interlamellar spacing on strength of pearlite in annealed eutectoid and hypoeutectoid plain carbon steels10.1016/0956-7151(91)90002-I ↗
15. Local cementite cracking induced by heterogeneous plastic deformation in lamellar pearlite10.1016/j.msea.2016.10.018 ↗
16. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
17. Transformation of structure in carbon steel specimen under loading by Mach stem, formed in preliminary compressed high explosive charge TG-4010.4028/www.scientific.net/MSF.673.89 ↗
18. Deformation twinning in shock-loaded pearlite10.1016/0001-6160(67)90158-7 ↗
19. Phase transitions under shock-wave loading10.1103/RevModPhys.49.523 ↗
20. Shock wave study of the α ⇄ ϵ phase transition in iron10.1063/1.1663148 ↗
21. Dynamic polymorphism of some binary iron alloys10.1063/1.1708625 ↗
22. Shock-induced phase transition and spalling characteristic in pure iron and FeMnNi alloy
23. An estimate of the nucleation time in the martensitic transformation10.1007/BF02811707 ↗
24. The impact of peak shock stress on the microstructure and shear behavior of 1018 steel10.1016/j.actamat.2007.07.051 ↗
25. Effects of initial microstructure and shock method on the shock-induced transformation strengthening of carbon steels10.1007/BF02917530 ↗
26. Rare twin linked to high-pressure phase transition in iron10.1016/j.scriptamat.2009.01.014 ↗
27. Interactions of plasticity and phase transformation under shock in iron bicrystals10.1063/1.5080227 ↗
28. Microstructural fingerprints of phase transitions in shock-loaded iron10.1038/srep01086 ↗
29. Ferrite: cementite crystallography in pearlite10.1007/BF02665057 ↗
30. Computer-aided three-dimensional visualization of twisted cementite lamellae in eutectoid steel10.1016/j.actamat.2008.08.017 ↗
31. Veroyatnue mechanezm raspada martenseeta
32. Shock and spall behaviors of a high specific strength steel: Effects of impact stress and microstructure10.1063/1.4979346 ↗
33. Spall damage of a mild carbon steel: effects of peak stress, strain rate and pulse duration10.1016/j.msea.2016.02.080 ↗
34. Design of uniaxial strain shock recovery experiments
35. Structure-property relationships under extreme dynamic environments: Shock recovery experiments10.1007/978-3-031-79725-5 ↗
36. Influence of shock-wave deformation on the structure/property behavior of materials
37. Hugoniot and strength behavior of silicon carbide10.1063/1.2159084 ↗
38. Dynamic compression of an Fe-Cr-Ni alloy to 80 GPa10.1063/1.366233 ↗
39. Dynamic strength properties and alpha-phase shock Hugoniot of iron and steel10.1063/1.5019484 ↗
40. Spall strength of a mild carbon steel: effects of tensile stress history and shock-induced microstructure10.1016/j.msea.2019.03.019 ↗
41. Valence electron structure model of spall strength in middle carbon steel10.1016/j.jallcom.2017.01.270 ↗
42. J.M. De’Ath, W. Proud, J. Millett, G.J. Appleby-Thomas, Phase change in 080M40 plain carbon steel, in: AIP Conference Proceedings, American Institute of Physics, 2012, pp. 1537–1540.10.1063/1.3686576 ↗
43. Does the pressure-induced α -ϵ phase transition occur for all low-alloy steels?10.1098/rspa.2004.1314 ↗
44. Effects of strain rate on mechanical properties and fracture mechanisms in a dual phase steel
45. Yield stress, polymorphic transformation, and spall fracture of shock-loaded iron in various structural states and at various temperatures10.1063/1.4921356 ↗
46. Dynamic propagation of deformation twins in iron single crystals10.1143/JPSJ.21.2616 ↗
47. Applying the grain orientation dependence of deformation twinning to improve the deformation properties of an Fe-6.5wt% Si alloy10.1016/j.jallcom.2016.07.319 ↗
48. Deformation twinning in explosively-driven tantalum10.1016/j.msea.2012.06.071 ↗
49. Grain neighbour effects on twin transmission in hexagonal close-packed materials
50. Shock-induced twinning and texture in a mild carbon steel10.1016/j.msea.2019.138832 ↗
51. Deformation analysis of ferrite/pearlite banded structure under uniaxial tension using digital image correlation10.1016/j.optlaseng.2016.04.019 ↗
52. Capture deformation twinning in Mg during shock compression with ultrafast synchrotron x-ray diffraction10.1103/PhysRevLett.123.255501 ↗
53. {112}〈111〉 twinning during ω to body-centered cubic transition10.1016/j.actamat.2013.09.040 ↗
54. Omega transitional structure associated with {112}〈111〉 deformation twinning in a metastable beta Ti-Nb alloy, revealed by atomic resolution high-angle annular dark-field scanning transmission electron microscopy10.1016/j.jallcom.2018.06.281 ↗
55. Lath formation mechanisms and twinning as lath martensite substructures in an ultra low-carbon iron alloy10.1038/s41598-018-32679-6 ↗
56. A popular metastable omega phase in body-centered cubic steels10.1016/j.matchemphys.2013.02.040 ↗
57. Deformation twinning: Time dependence and associated strengthening effects in shock-loaded Cu-8.7at% Ge10.1016/0025-5416(82)90061-1 ↗
58. Chawla · 1999
59. Analysis of shock temperature data for iron, Int10.1080/08957959008201035 ↗
60. Dynamic yield behavior of shock-loaded iron from 76 to 573 K10.1016/0001-6160(69)90075-3 ↗
61. Dynamic deformation twinning in shock-loaded iron10.1063/1.1659750 ↗
62. Deformation twinning
63. Study on formation mechanism of {332}〈113〉 deformation twinning in metastable β -type Ti alloy focusing on stress-induced α″ martensite phase10.1016/j.scriptamat.2019.10.011 ↗
64. Reversion of a parent {130}〈310〉α″ martensitic twinning system at the origin of {332}〈113〉β twins observed in metastable β titanium alloys10.1103/PhysRevLett.117.245501 ↗
65. Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects10.1016/j.jallcom.2016.12.394 ↗
66. Effects of existing substructure on shock-twinning behaviour of iron10.1002/pssa.19700020205 ↗