journal article·2022-07

3D interconnected nanoporous FeCo soft magnetic materials synthesized by liquid metal dealloying

S.-H. Joo, H. Kato

Publisher page

Abstract

FeCo alloys are important soft magnetic materials with the highest saturation magnetizations, high Curie temperature, high permeability, and low losses. In this study, 3D interconnected nanoporous (3DNP) FeCo soft magnetic materials were produced by liquid metal dealloying (LMD). Ni atoms were selectively dissolved from (FeCo) xNi 100−x precursor alloys into Mg metallic melt, and Fe and Co atoms self-organized 3DNP structures. Morphology and grain boundary characteristics depended on the LMD processing temperature and Ni concentration in precursor alloy. Developed 3DNP FeCo materials demonstrated soft magnetic properties with high saturation magnetization over 220 emu/g. Although 3DNP structure increases hysteresis loss due to its porosity, it leads to lower eddy current loss than bulk FeCo at high frequencies. The LMD process has advantages for synthesizing nanostructured FeCo with high magnetization and low coercivity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanoporous metals and alloys · Supercapacitor Materials and Fabrication · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Soft magnetic FeCo alloys: alloy development, processing, and properties10.1179/174328005X14339 ↗
2. Magnetic domains and coercivity in FeCo soft magnetic alloys10.1063/1.369073 ↗
3. Near equiatomic FeCo alloys: constitution, mechanical and magnetic properties10.1016/j.pmatsci.2005.04.001 ↗
4. Design parameters for magneto-elastic soft actuators10.1088/0964-1726/19/5/055017 ↗
5. Electromagnetic-wave-absorption properties of wire-like structures self-assembled by FeCo nanocapsules10.1088/0022-3727/41/17/175001 ↗
6. Applications beyond data storage10.1038/nmat1494 ↗
7. FeCo/graphitic-shell nanocrystals as advanced magnetic-resonance-imaging and near-infrared agents10.1038/nmat1775 ↗
8. Synthesis of air stable FeCo alloy nanocrystallite by proteic sol–gel method using a rotary oven10.1016/j.jallcom.2014.10.074 ↗
9. Synthesis of nano-sized Fe–Co alloy powders by chemical solution mixing of metal salts and hydrogen reduction (CSM-HR)10.1016/j.matlet.2005.05.027 ↗
10. Synthesis of air stable FeCo nanoparticles10.1063/1.3540387 ↗
11. Synthesis and stabilization of FeCo nanoparticles10.1021/ja0708969 ↗
12. Tailoring the magnetic properties of FexCo(1−x) nanopowders prepared by a polyol process10.1039/C7DT01691C ↗
13. Cubic silica-coated and amine-functionalized FeCo nanoparticles with high saturation magnetization10.1021/cm304111z ↗
14. Dealloying by metallic melt10.1016/j.matlet.2011.01.054 ↗
15. Novel hierarchical nanoporous graphene nanoplatelets with excellent rate capabilities produced via self-templating liquid metal dealloying10.1016/j.mtcomm.2020.101120 ↗
16. Three-dimensional bicontinuous porous graphite generated in low temperature metallic liquid10.1016/j.carbon.2015.09.093 ↗
17. Bulk-nanoporous-silicon negative electrode with extremely high cyclability for lithium-ion batteries prepared using a top-down process10.1021/nl501500g ↗
18. Three-dimensional open-cell macroporous iron, chromium and ferritic stainless steel10.1016/j.scriptamat.2013.01.011 ↗
19. Development of porous FeCo by liquid metal dealloying: evolution of porous morphology and effect of interaction between ligaments and melt10.1016/j.matdes.2019.107908 ↗
20. Ordering kinetics of nanoporous FeCo during liquid metal dealloying and the development of nanofacets10.1016/j.scriptamat.2019.10.007 ↗
21. Kinetics of formation and coarsening of nanoporous α-titanium dealloyed with Mg melt10.1063/1.4821066 ↗
22. Nano- to submicro-porous β-Ti alloy prepared from dealloying in a metallic melt10.1016/j.scriptamat.2011.06.019 ↗
23. Open porous dealloying-based biomaterials as a novel biomaterial platform10.1016/j.msec.2018.03.008 ↗
24. Tuning microstructure and mechanical properties of open porous TiNb and TiFe alloys by optimization of dealloying parameters10.1016/j.scriptamat.2018.05.029 ↗
25. Dealloying-based interpenetrating-phase nanocomposites matching the elastic behavior of human bone10.1038/s41598-017-00048-4 ↗
26. Optimizing niobium dealloying with metallic melt to fabricate porous structure for electrolytic capacitors10.1016/j.actamat.2014.11.002 ↗
27. Nanoporous magnesium10.1007/s12274-018-2167-9 ↗
28. Beating thermal coarsening in nanoporous materials via high-entropy design
29. Nanoporous high-entropy alloy by liquid metal dealloying10.3390/met10101396 ↗
30. Evolution of 3D interconnected composites of high-entropy TiVNbMoTa alloys and Mg during liquid metal dealloying10.1016/j.compositesb.2021.109044 ↗
31. Topology-generating interfacial pattern formation during liquid metal dealloying10.1038/ncomms9887 ↗
32. Effects of porosity and grain size on the magnetic properties of NiZn ferrite10.1111/j.1151-2916.1977.tb16092.x ↗
33. Hysteresis properties of titanomagnetites: grain-size and compositional dependence10.1016/0031-9201(77)90108-X ↗
34. Grain size effects in selective laser melted Fe-Co-2V10.3390/app9183701 ↗
35. Matching P/M and the physics of magnetic materials
36. High permeability and low core loss Fe-based soft magnetic composites with Co-Ba composite ferrite insulation layer obtained by sol-gel method10.1016/j.jallcom.2021.162107 ↗
37. Characterization of as-synthesized FeCo magnetic nanoparticles by coprecipitation method10.1063/1.4795321 ↗
38. Synthesis and magnetic properties of flower-like FeCo particles through a one pot polyol process10.1016/j.jcis.2013.04.041 ↗
39. Synthesis of variously shaped magnetic FeCo nanoparticles and the growth mechanism of FeCo nanocubes10.1039/C7CE01353A ↗
40. Large-scale controlled synthesis of FeCo nanocubes and microcages by wet chemistry10.1021/cm800518x ↗
41. Self-nanoscaling in FeCo alloys prepared via severe plastic deformation10.1016/j.jallcom.2012.01.026 ↗
42. Structural and magnetic properties of mechanically alloyed Fe50Co50 nanoparticles10.1016/j.jallcom.2015.04.022 ↗
43. Mechanical alloying of FeCo nanocrystalline magnetic powders10.1007/s11664-004-0155-1 ↗
44. Formation of nanocrystalline Fe–Co powders produced by mechanical alloying10.1016/S0921-5093(00)00982-5 ↗