journal article·2022-09Open access

Exploiting different morphologies of non-ferromagnetic interacting precursor’s for preparation of hexaferrite magnets

Harikrishnan Vijayan, Amalie Povlsen, Jack Thomas-Hunt, Mathias Ibsen Mørch, Mogens Christensen

Abstract

Sintered cold compacted hexaferrite magnets with appreciable magnetic properties and crystallite alignment were made from non-magnetic precursors without applying an external magnetic field. This work presents a novel approach employing non-ferromagnetic interacting precursors comprising of platelet shaped six-line ferrihydrite and needle shaped goethite nanoparticles. A hydrothermal synthesis route was employed to produce platelet shaped six-line ferrihydrite of ~5 nm thickness. Needle shaped goethite nanoparticles were likewise prepared by hydrothermal synthesis with apparent dimensions of ~10 × 27 × 10 nm3 extracted from X-ray powder diffraction data. The powder diffraction Rietveld modelling also revealed the presence of an amorphous phase in the six-line ferrihydrite and a SrCO3 impurity. The presence of needle shaped goethite nanoparticles improves the alignment of magnets, while retaining the coercivity (Hc), in contrast to hexaferrite magnets prepared from six-line ferrihydrite by spark plasma sintering (SPS). The non-ferromagnetically interacting precursors were directly converted to the SrFe12O19 magnets by pressing them with conventional compaction technique followed by subsequent sintering of the pellets. Decoupling the pressing and sintering step is interesting for industrial production of magnets. The hexaferrite magnets prepared displayed good combination of saturation magnetization Ms = 70 Am2/kg and coercivity Hc = 297 kA/m with some degree of alignment of the crystallites Mr/Ms = 0.71. This procedure exploits the anisotropic shape of the crystallites and compaction using uniaxial pressure followed by sintering into aligned bulk magnets. Two sets of hexaferrite bulk magnets were prepared by sintering at 900 °C and held for 2 h and 1050 °C with a holding time 0 min. The hexaferrite magnets sintered at 1050 °C were subjected to transmission pole figure analysis. The texture index for each pellet were extracted from the pole figure analysis. Employing needle shaped goethite nanoparticles actually enhanced the alignment of the hexaferrite magnets. The magnet obtained from only six-line ferrihydrite displayed only a slightly improved texture index when compared with mixture of six-line ferrihydrite and goethite nanoparticles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Magnetic Properties of Alloys · Multiferroics and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Nanoengineered high-performance hexaferrite magnets by morphology-induced alignment of tailored nanoplatelets10.1021/acsanm.8b01748 ↗
2. Improved performance of SrFe12O19 bulk magnets through bottom-up nanostructuring10.1039/C5NR07854G ↗
3. Enhancement of magnetic properties by spark plasma sintering of hydrothermally synthesised SrFe12O1910.1039/C6CE02275H ↗
4. Texturing degree boosts thermoelectric performance of silver-doped polycrystalline SnSe10.1038/am.2017.147 ↗
5. Improving piezoelectric properties by controlling phase structure and crystal orientation10.1039/C7RA07711D ↗
6. Comparison of growth texture in round Bi2212 and flat Bi2223 wires and its relation to high critical current density development10.1038/srep08285 ↗
7. Hexagonal ferrites: a review of the synthesis, properties and applications of hexaferrite ceramics10.1016/j.pmatsci.2012.04.001 ↗
8. The pull of stronger magents10.1038/472022a ↗
9. Low-temperature wet chemistry synthetic approaches towards ferrites10.1039/D0QI00294A ↗
10. Effect of Ti-Zn substitution on structural, magnetic and microwave absorption characteristics of strontium hexaferrite10.1016/j.jallcom.2013.08.188 ↗
11. Magnetic and electromagnetic properties of Pr doped strontium ferrite / polyaniline composite film10.1016/j.jmmm.2014.05.030 ↗
12. A novel ‘one-pot’ synthetic method for preparation of (Ni0.65Zn0.35Fe2O4)x–(BaFe12O19)1−x nanocomposites and study of their microwave absorption and magnetic properties10.1016/j.powtec.2015.03.046 ↗
13. Sintered SrFe12O19/FeB composites: precipitation of a -Fe and magnetic properties10.1016/j.jallcom.2015.07.134 ↗
14. Anisotropic magnetic nanoparticles: a review of their properties, syntheses and potential applications10.1016/j.pmatsci.2018.03.003 ↗
15. Anisotropic characteristics and improved magnetic performance of Ca–La–Co-substituted strontium hexaferrite nanomagnets
16. Structure and magnetic performance of Gd substituted Sr-based hexaferrites10.1016/j.jallcom.2019.153180 ↗
17. A study on the spectral, microstructural, and magnetic properties of Eu–Nd double-substituted Ba0.5Sr0.5Fe12O19 hexaferrites synthesized by an ultrasonic-assisted approach10.1016/j.ultsonch.2019.104847 ↗
18. Tb3+ substituted strontium hexaferrites: structural, magnetic and optical investigation and cation distribution10.1016/j.jre.2019.06.007 ↗
19. First-order magnetic transition induced by structural transition in hexagonal structure10.1016/j.jmmm.2019.165821 ↗
20. Influence of Tm–Tb substitution on magnetic and optical properties of Ba–Sr hexaferrites prepared by ultrasonic assisted citrate sol-gel approach10.1016/j.matchemphys.2020.123324 ↗
21. Research on La3+-Co2+-substituted strontium ferrite magnets for high intrinsic coercive force10.1016/j.jmmm.2006.02.096 ↗
22. Influences of rare earth La3+ substitution on structure and magnetic properties of M-type strontium ferrites
23. Microstructure, magnetic and optical properties of Nb3+ and Y3+ ions co-substituted Sr hexaferrites10.1016/j.ceramint.2019.10.191 ↗
24. A mechanism of magnetic hysteresis in heterogenous alloys, Philos. Trans. R. Soc. London. Ser. A
25. Progress and prospects of hard hexaferrites for permanent magnet applications
26. Hexaferrite-based permanent magnets with upper magnetic properties by cold sintering process via a non-aqueous solvent10.1016/j.actamat.2021.117262 ↗
27. Hexagonal SrFe12O19 ferrite with high saturation magnetization10.1016/j.ceramint.2018.04.187 ↗
28. Preparation and magnetic properties of different morphology nano-SrFe12O19 particles prepared by sol-gel method10.1016/j.jallcom.2007.12.037 ↗
29. Effect of pH value on the structural and magnetic properties of nanocrystalline strontium hexaferrite thin films10.1016/j.jmmm.2011.05.055 ↗
30. Ultrathin nanoplatelets of six-line ferrihydrite enhances the magnetic properties of hexaferrite10.1039/D1QM00224D ↗
31. Alignment of strontium hexaferrite, by cold compaction of anisotropic non-magnetically interacting crystallites10.1039/D2DT00062H ↗
32. The nature of x-ray scattering from geo-nanoparticles: practical considerations of the use of the Debye equation and the pair distribution function for structure analysis10.1016/j.chemgeo.2011.06.010 ↗
33. Occurrence and constitution of natural and synthetic ferrihydrite, a widespread iron oxyhydroxide10.1021/cr970105t ↗
34. M-SrFe12O19 and ferrihydrite-like ultrathin nanoplatelets as building blocks for permanent magnets: HAADF-STEM study and magnetic properties10.1016/j.jssc.2018.05.015 ↗
35. Microwave-assisted synthesis and magnetic properties of M-SrFe12O19 nanoparticles10.1016/j.jmmm.2017.10.002 ↗
36. E. Di Mauro, Weak ferromagnetic component in goethite (α-FeOOH) and its relation with microstructural characteristics10.1016/j.matchemphys.2020.122851 ↗
37. Synthesis of submicron-sized acicular goethite and platelet-like hematite particles and dependence of magnetic properties of α-Fe particles on their shape and size10.1016/j.matchemphys.2016.01.002 ↗
38. Goethite (α-FeOOH) nanopowders synthesized via a surfactant-assisted hydrothermal method: Morphology, magnetic properties and conversion to rice-like α-Fe2O3 after annealing10.1039/C5RA02532J ↗
39. E. Di Mauro, Goethite (α-FeOOH) magnetic transition by ESR, Magnetometry and Mössbauer10.1016/j.matchemphys.2016.01.067 ↗
40. L. Lutterotti, S. Matthies, H.R. Wenk, MAUD: afriendly Java program for material analysis using diffraction, IUCr Newsl. Th CPD. (1999) 14–15. doi:10.1038/162838a0.10.1038/162838a0 ↗
41. Rod-on-flake α-FeOOH/BiOI nanocomposite: facile synthesis, characterization and enhanced photocatalytic performance10.1016/j.colsurfa.2017.10.036 ↗
42. Rietveld Refinement of Debye-Scherrer Synchrotron X-ray Data from A1203
43. Correction of intensities of preferred orientation in powder diffractometry: application of the march model10.1107/S0021889886089458 ↗
44. Rietveld texture analysis from diffraction images10.1524/zksu.2007.2007.suppl_26.125 ↗
45. On the reproduction of the orientation distribution function of textured samples from reduced pole figures using the concept of a conditional ghost correction10.1002/pssb.2221120254 ↗
46. Recent advances in magentic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
47. Structural model for ferrihydrite10.1180/claymin.1993.028.2.02 ↗
48. Unraveling structural and magnetic information during growth of nanocrystalline SrFe12O1910.1039/C6TC03803D ↗
49. A structural study of size-dependent lattice variation: In situ X-ray diffraction of the growth of goethite nanoparticles from 2-line ferrihydrite10.2138/am-2020-7217 ↗
50. C.B. Carter, D.B. Willams, Transmission Electron Microscopy, 1994. doi:10.1295/kobunshi.43.94.10.1295/kobunshi.43.94 ↗
51. Nanoengineered high-performance hexaferrite magnets by morphology-induced alignment of tailored nanoplatelets10.1021/acsanm.8b01748 ↗
52. Optimization of magnetic properties in fast consolidated SrFe12O19 nanocrystallites10.1039/C9RA02440A ↗
53. Exploring the magnetic properties of cobalt-ferrite nanoparticles for the development of a rare-earth-free permanent magnet10.1021/acs.chemmater.5b01034 ↗
54. Coercivity enhancement of strontium hexaferrite nano-crystallites through morphology controlled annealing10.1016/j.mtla.2018.09.017 ↗