journal article·2022-12

Mechanical anisotropy of laser powder bed fusion fabricated Ti-41Nb alloy using pre-alloyed powder: Roles played by grain morphology and crystallographic orientation

Zhongjie Li, Hao Xu, Anping Dong, Xuecheng Cai, Lin He, Dafan Du, Hui Xing, Guoliang Zhu, Baode Sun

Publisher page

Abstract

This work investigated the influence of the grain morphology and crystallographic orientation on the mechanical anisotropy of a laser powder bed fusion produced ( L -PBFed) Ti-41 Nb alloy using pre-alloyed alloy for dental implants. The microstructure of L -PBFed Ti-41Nb alloy consists of columnar grains of a high aspect ratio with a strong< 001 > preferred orientation along the building direction (BD). To evaluate the mechanical anisotropy of L -PBFed Ti-41 Nb alloy, the external loading was compressed either perpendicular or parallel to BD (i.e., horizontal and vertical samples, respectively). Compression results show that the compressive yield strength (CYS) of horizontal samples is significantly higher than that of vertical samples. At the early stage of deformation, obvious {332}< 113 > mechanical twins are preferentially detected in the nearly< 001 > orientated grains along the compression axis. The dominant reasons for the lower CYS of vertical samples can be attributed to the easier activation of {332}〈113〉 mechanical twins in the typical columnar grains with strong< 001 > crystallographic orientation. It is suggested that the anisotropy of the L-PBFed alloy can be utilized through simple position control such as adjustment of the BD and reasonable structural design.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
2. Ti based biomaterials, the ultimate choice for orthopaedic implants - a review10.1016/j.pmatsci.2008.06.004 ↗
3. Improving stress shielding following total hip arthroplasty by using a femoral stem made of β type Ti-33.6Nb-4Sn with a Young’s modulus gradation10.1016/j.jbiomech.2017.08.017 ↗
4. Effects of Ti, Al and V concentrations on cell viability10.2320/matertrans1989.39.1053 ↗
5. A new look at biomedical Ti-based shape memory alloys10.1016/j.actbio.2012.01.018 ↗
6. Is there scientific evidence favoring the substitution of commercially pure titanium with titanium alloys for the manufacture of dental implants?10.1016/j.msec.2016.10.025 ↗
7. A review on alloy design, biological response, and strengthening of β-titanium alloys as biomaterials10.1016/j.msec.2020.111661 ↗
8. Recent development in beta titanium alloys for biomedical applications10.3390/met10091139 ↗
9. Characterization, corrosion behavior, cellular response and in vivo bone tissue compatibility of titanium-niobium alloy with low Young’s modulus10.1016/j.msec.2015.10.062 ↗
10. Reversion of a parent 310 α′′ martensitic twinning system at the origin of {332} 113 ©β twins observed in metastable β titanium alloys10.1103/PhysRevLett.117.245501 ↗
11. Metal powders in additive manufacturing: a review on reusability and recyclability of common titanium, nickel and aluminum alloys
12. Progress in materials science additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
13. Additive manufacturing of metals: microstructure evolution and multistage control10.4028/b-NdD003 ↗
14. Fracture behavior of laser powder bed fusion fabricated Ti41Nb via in-situ alloying10.1016/j.actamat.2021.117593 ↗
15. Selective laser melting of Ti–35Nb composite from elemental powder mixture: microstructure, mechanical behavior and corrosion behavior10.1016/j.msea.2019.06.001 ↗
16. Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture10.1016/j.jmst.2020.05.052 ↗
17. Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via laser powder bed fusion10.1016/j.actamat.2020.116522 ↗
18. Characteristics of β-type Ti-41Nb alloy produced by laser powder bed fusion: microstructure, mechanical properties and in vitro biocompatibility10.1016/j.jmst.2022.02.026 ↗
19. Comparison of microstructure and mechanical behavior of Ti-35Nb manufactured by laser powder bed fusion from elemental powder mixture and prealloyed powder
20. Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting10.1016/j.mtla.2019.100299 ↗
21. Enhancing work hardening and ductility in additively manufactured β Ti: roles played by grain orientation, morphology and substructure10.1016/j.jmst.2021.08.006 ↗
22. Controlling the Young’s modulus of a ß-type Ti-Nb alloy via strong texturing by LPBF10.1016/j.matdes.2022.110516 ↗
23. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
24. Relationship between texture development and deformation twinning activity in Ti-15Mo alloy10.1016/j.msea.2018.04.050 ↗
25. Role of grain size in tensile behavior in twinning-induced plasticity β Ti-20V–2Nb-2Zr alloy10.1016/j.matchar.2016.09.016 ↗
26. Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion10.1016/j.matchar.2021.110951 ↗
27. Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel10.1016/j.msea.2019.138152 ↗
28. Variant selection of α precipitation in a beta titanium alloy during selective laser melting and its influence on mechanical properties10.1016/j.msea.2020.139336 ↗
29. Microstructure tailoring of Ti–15Mo alloy fabricated by selective laser melting with high strength and ductility10.1016/j.msea.2021.141962 ↗
30. Selective laser melting enabled additive manufacturing of Ti–22Al–25Nb intermetallic: excellent combination of strength and ductility, and unique microstructural features associated10.1016/j.actamat.2019.05.008 ↗
31. On the role of melt flow into the surface structure and porosity development during selective laser melting10.1016/j.actamat.2015.06.004 ↗
32. Spatter formation in selective laser melting process using multi-laser technology10.1016/j.matdes.2017.06.040 ↗
33. Effect of surface morphology of ZnO electrodeposited on photocatalytic oxidation of methylene blue dye part I: Analytical Study10.1016/S1452-3981(23)18310-6 ↗
34. Effects of laser surface melting on crystallographic texture, microstructure, elastic modulus and hardness of Ti−30Nb−4Sn alloy10.1016/S1003-6326(20)65221-9 ↗
35. A high strength and low modulus metastable β Ti-12Mo-6Zr-2Fe alloy fabricated by laser powder bed fusion in-situ alloying
36. Study of superior strength in Ti15Mo alloy manufactured using selective laser melting10.1016/j.jallcom.2021.161186 ↗
37. Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young’s modulus10.1016/j.scriptamat.2016.12.038 ↗
38. Heat-treatment induced microstructural evolution and enhanced mechanical property of selective laser melted near β Ti-5Al-5Mo-5 V-3Cr-1Zr alloy10.1016/j.jallcom.2020.158351 ↗
39. Texture dependent strain hardening in additively manufactured stainless steel 316L10.1016/j.msea.2021.141483 ↗
40. Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel
41. Relation between negative temperature coefficient in electrical resistivity and athermal ω phase in Ti-xNb (26 ≤ x ≤ 29 at%) alloys10.1016/j.jallcom.2012.02.026 ↗
42. Composition of the nanosized orthorhombic O′ phase and its direct transformation to fine α during ageing in metastable β-Ti alloys10.1016/j.scriptamat.2019.06.008 ↗
43. Nano-scale structural non-uniformities in gum like Ti-24Nb-4Zr-8Sn metastable β-Ti alloy10.1016/j.scriptamat.2018.08.043 ↗
44. Factors influencing the elastic moduli, reversible strains and hysteresis loops in martensitic Ti-Nb alloys10.1016/j.msec.2014.12.048 ↗
45. Mechanical behaviour of Ti-Nb-Hf alloys10.1016/j.msea.2018.10.019 ↗
46. Dislocation glide and mechanical twinning in a ductile VNbTi medium entropy alloy10.1016/j.jmst.2021.09.016 ↗
47. {332}〈113〉 Twinning system selection in a β-type Ti-15Mo-5Zr polycrystalline alloy10.1016/j.msea.2013.04.119 ↗
48. Selective laser melting of biomedical Ti15Mo alloy: a proper combination of strength and ductility under the effects of multiple mechanisms10.1016/j.jallcom.2021.159686 ↗
49. {332}<113>Twinning transfer behavior and its effect on the twin shape in a beta-type Ti-23.1Nb-2.0Zr-1.0O alloy10.1016/j.jmst.2021.03.015 ↗
50. Evolution of deformation mechanisms of Ti-22.4Nb-0.73Ta-2Zr-1.34O alloy during straining10.1016/j.actamat.2010.01.015 ↗
51. Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis10.1016/j.scriptamat.2011.02.033 ↗
52. Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: microstructure, anisotropic mechanical response, and multiple strengthening mechanism10.1016/j.jallcom.2019.07.106 ↗
53. Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments10.1016/j.msea.2017.03.085 ↗
54. Anisotropic microstructure and mechanical properties of additively manufactured Co–Cr–Mo alloy using selective electron beam melting for orthopedic implants10.1016/j.msea.2019.138270 ↗
55. Strain rate and mechanical stability in determining deformation behavior of beta Ti alloys10.1016/j.msea.2020.140274 ↗
56. Critical stresses for twinning, slip, and transformation in Ti-based shape memory alloys10.1007/s40830-016-0061-4 ↗
57. On the nucleation mechanism of {112} 〈111〉 mechanical twins in as-quenched β metastable Ti-12 wt% Mo alloy10.1016/j.mtla.2019.100418 ↗
58. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
59. Ω Phase acts as a switch between dislocation channeling and joint twinning- and transformation-induced plasticity in a metastable β titanium alloy10.1016/j.actamat.2018.03.053 ↗
60. Selective laser melting (SLM) of CX stainless steel: theoretical calculation, process optimization and strengthening mechanism10.1016/j.jmst.2020.09.031 ↗
61. Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum10.1016/j.actamat.2013.04.036 ↗
62. Effect of grain boundary angle on {332}<113>twinning transfer behavior in β-type Ti–15Mo–5Zr alloy10.1007/s10853-018-2167-x ↗
63. Articles on the physics and metallography of magnesiums
64. Beta type Ti-Mo alloys with changeable Young’s modulus for spinal fixation applications10.1016/j.actbio.2012.02.004 ↗
65. Effect of the initial grain size and orientation on the formation of deformation twins in Ti-15Mo alloy10.1007/s10853-017-1314-0 ↗
66. Microstructural evolution and anisotropic mechanical properties of Inconel 625 superalloy fabricated by directed energy deposition10.1016/j.jallcom.2021.159426 ↗
67. Grain-boundary strengthening in nanocrystalline chromium and the Hall-Petch coefficient of body-centered cubic metals10.1016/j.scriptamat.2012.09.025 ↗