Effect of Fe addition on the glass-forming ability, stability, and mechanical properties of Zr50Cu34-xFexAl8Ag8 metallic glasses
Source abstract
Abstract
Zr 50Cu 34-xFe xAl 8Ag 8 ( x = 0, 2, 4, 6, and 8) alloy bars of different diameters were prepared by copper mold suction casting and copper mold casting. The compressive mechanical properties of metallic glass samples with different Fe contents were determined by a universal testing machine. The microstructure and thermodynamics of the alloy samples were analyzed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and differential scanning calorimetry. According to the experimental results, Fe doping had a significant effect on the glass-forming ability, stability, and mechanical properties of these metallic glasses. The maximum diameter of the Zr 50Cu 32Fe 2Al 8Ag 8 metallic glass bar was 15 mm, and the cooling rate of the alloy sample was 7.7 K/s. The addition of Fe inhibited the formation of stable crystalline phases inside the alloy sample and improved the glass-forming ability of the metallic glass. With the addition of Fe, the DSC curve of the alloy sample moved to higher temperatures, and the characteristic temperatures and the stability of the metallic glass increased. The fracture strength ( σ max) and ultimate strain ( ε f) of the metallic glass samples reached their maximum values of 1917.6 MPa and 3.97 %, respectively, for Zr 50Cu 30Fe 4Al 8Ag 8. Compared with the Fe-free Zr 50Cu 34Al 8Ag 8 metallic glass, σ max and ε f increased by 51.4 MPa and 1.19 %, respectively. With the addition of Fe, the change in the distribution and content of free volume inside the metallic glass sample is the main reason for the improvement of its mechanical properties. This study shows that trace element doping has an important effect on the properties of metallic glasses.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. The case for bulk metallic glass10.1016/S1369-7021(04)00124-5 ↗
2. Superior corrosion resistance of high-temperature Ir–Ni–Ta–(B) amorphous alloy in sulfuric acid solution10.1016/j.corsci.2022.110227 ↗
3. Crack tip cavitation in metallic glasses10.1016/j.jnoncrysol.2022.121762 ↗
4. Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing10.1038/s41467-021-26858-9 ↗
5. Bulk metallic glasses for biomedical applications10.1007/s11837-009-0128-1 ↗
6. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
7. Ultra-high strength above 5000 MPa and soft magnetic properties of Co–Fe–Ta–B bulk glassy alloys10.1016/j.actamat.2003.12.008 ↗
8. Tensile elastic behavior of a Zr–Cu–Ag–Al bulk metallic glass10.1016/j.jmst.2013.12.020 ↗
9. Ni-free Zr-based bulk metallic glasses with critical diameter above 20 mm10.1016/j.jallcom.2007.04.188 ↗
10. In situ neutron scattering studies of a liquid–liquid phase transition in the supercooled liquid of a Zr–Cu–Al–Ag glass-forming alloy10.1063/5.0048486 ↗
11. High glass-forming ability and unusual deformation behavior of new Zr-Cu-Fe-Al bulk metallic glasses10.4028/www.scientific.net/MSF.654-656.1042 ↗
12. Enhanced glass forming ability and plasticity of a Ni-free Zr-based bulk metallic glass
13. Formation of a phase separated structure in the Zr–Cu–Fe–Al alloys by thermo-mechanical processing10.1016/j.intermet.2021.107224 ↗
14. A plastic Zr–Cu–Ag–Al bulk metallic glass10.1016/j.actamat.2010.10.034 ↗
15. Effect of applied stress on the mechanical properties of a Zr-Cu-Ag-Al bulk metallic glass with two different structure states10.3390/ma10070711 ↗
16. Bulk metallic glass formation in Zr–Cu–Fe–Al alloys10.1063/1.1948513 ↗
17. Deformation and strain rate sensitivity of a Zr–Cu–Fe–Al metallic glass10.1016/j.msea.2011.01.049 ↗
18. Enhanced glass forming ability and plasticity of Mg-based bulk metallic glass by minor addition of Cd10.1016/j.jallcom.2013.09.070 ↗
19. Understanding of micro-alloying on plasticity in Cu46Zr47−xAl7Dyx (0 ≤ x ≤ 8) bulk metallic glasses under compression: Based on mechanical relaxations and theoretical analysis10.1016/j.ijplas.2016.02.002 ↗
20. Enhanced plasticity by phase separation in CuZrAl bulk metallic glass with micro-addition of Fe10.1016/j.scriptamat.2009.01.032 ↗
21. Enhanced glass forming ability and plasticity of a Ni-free Zr-based bulk metallic glass
22. Effects of Ag substitution for Fe on glass-forming ability, crystallization kinetics, and mechanical properties of Ni-free Zr–Cu–Al–Fe bulk metallic glasses10.1016/j.jallcom.2020.154385 ↗
23. Effects of Sn addition on mechanical properties of Ti-based bulk metallic glass composites10.1016/j.matdes.2016.08.051 ↗
24. Co content effect on elastic strain limit in ZrCuNiAlCo bulk metallic glasses10.1016/j.scriptamat.2017.05.007 ↗
25. Effect of W addition on the glass forming ability and mechanical properties of Fe-based metallic glass10.1016/j.jallcom.2017.10.104 ↗
26. Effect of Nb and Ta addition on mechanical properties of Zr-based bulk metallic glasses and composites10.1016/j.jallcom.2022.165071 ↗
27. Zr–(Cu, Ag)–Al bulk metallic glasses10.1016/j.actamat.2007.12.030 ↗
28. , Cooling rate evaluation during solidification in the suction casting process10.1016/j.jmrt.2020.09.082 ↗
29. Experimental investigation of the effects of cooling with liquid nitrogen and air on the microstructure and mechanical properties of Zr50Cu34Al8Ag8 amorphous alloy10.1016/j.matlet.2022.132206 ↗
30. Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing10.1016/j.jnoncrysol.2020.120163 ↗
31. Crystallization-induced plasticity of Cu–Zr containing bulk amorphous alloys10.1016/j.actamat.2005.09.007 ↗
32. Effects of Cu addition on the glass forming ability and corrosion resistance of Ti-Zr-Be-Ni alloys10.1016/j.jallcom.2017.07.165 ↗
33. Effect of Hf substitution Cu on glass-forming ability, mechanical properties and corrosion resistance of Ni-free Zr–Ti–Cu–Al bulk metallic glasses10.1016/j.jallcom.2019.07.240 ↗
34. Review on the research and development of Ti-based bulk metallic glasses10.3390/met6110264 ↗
35. Effect of Ag substitution for Ti on glass-forming ability, thermal stability and mechanical properties of Zr-based bulk metallic glasses10.1016/j.msea.2018.12.123 ↗
36. Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses10.1016/j.msea.2016.06.081 ↗
37. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
38. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗
39. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
40. Effects of Ag addition on crystallization, microstructure and mechanical properties of Zr–Cu–Ni–Al–Ag bulk metallic glasses10.1016/j.jallcom.2012.10.101 ↗
41. Impact of micro-alloying on the plasticity of Pd-based bulk metallic glasses10.1016/j.scriptamat.2015.08.030 ↗
42. Extraordinary strength-ductility in gradient amorphous structured Zr-based alloy10.1016/j.jallcom.2021.161507 ↗
43. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
44. The glass transition as a free volume related kinetic phenomenon10.1016/0956-7151(90)90142-4 ↗
45. Bulk metallic glasses: Smaller is softer10.1063/1.2696502 ↗
46. Effect on microstructure and plastic deformation behavior of a Zr-based amorphous alloy by cooling rate control10.1016/j.jmst.2020.12.013 ↗
47. Effects of sample diameter, aspect ratio, and strain rate on compressive deformation and fracture behavior of Zr50Cu34Al8Ag8 metallic glass10.1016/j.jnoncrysol.2022.121583 ↗
48. Enhanced plastic strain in Zr-based bulk amorphous alloys10.1103/PhysRevB.64.180201 ↗
49. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
50. Effect of the substitution of Ag and Ni for Cu on the glass forming ability and plasticity of Cu60Zr30Ti10 alloy10.1016/j.scriptamat.2006.01.023 ↗
51. Phase separation and enhancement of plasticity in Cu–Zr–Al–Y bulk metallic glasses10.1016/j.actamat.2005.12.020 ↗
52. Role of minor addition of metallic alloying elements in formation and properties of Cu–Ti-rich bulk metallic glasses10.1557/JMR.2008.0246 ↗