journal article·2023-12

Fluoride-samarium(III) doped hierarchically porous carbon nanofibers as thin separator coating layer with excellent adsorption and outstanding catalysis of lithium polysulfide for lithium-sulfur batteries

Nanping Deng, Qiang Zeng, Yarong Liu, Yanan Li, Yong Liu, Weimin Kang

Publisher page

Abstract

Lithium-sulfur (Li-S) batteries are promising for next-generation energy storage due to their high energy density and low cost. However, challenges such as the “shuttle effect,” slow reaction kinetics, and lithium dendrite growth hinder their performance. In this study, we developed fluoride-samarium(III) doped hierarchically porous carbon nanofibers (SmF 3 -PCNFs) and coated them onto separators. These three-dimensional porous carbon networks confined LiPSs, while polar SmF 3 nanoparticles acted as efficient chemical anchors and catalysts. Simultaneously, the polar fluoride interfaces between the SmF 3 -PCNFs and cathode also can accelerate the transport of lithium ions and enhance the adhesion between them, enabling them to accommodate the huge volume changes of the sulfur cathode during cycling and improve long-cycle stability. Moreover, the modified separator with excellent lithium affinity also enables uniform lithium deposition to reduce lithium dendrite growth. Combining these advantages, the assembled Li-S battery with SmF 3-PCNFs modified separator exhibits a high initial discharge specific capacity of 1068.2 mAh g −1 and retains a capacity of 655.3 mAh g −1 after 750 cycles (with a decay rate of only 0.05 % per cycle), and the Coulombic efficiency remains above 93 %. This work will pave a new design path for the preparation of modified separators in high-performance Li-S batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Advanced preparation and application of transition metal selenides in lithium-sulfur batteries: a review10.1039/D2TA05576G ↗
2. Transition metal phosphides: new generation cathode host/separator modifier for Li–S batteries10.1039/D0TA11919A ↗
3. Anionic metal-organic framework modified separator boosting efficient Li-ion transport
4. Effect of a compressed separator on the electrochemical performance of Li-ion battery10.1016/j.jpowsour.2023.232835 ↗
5. Understanding the advantageous features of bacterial cellulose‐based separator in Li–S battery10.1002/admi.202201730 ↗
6. A Janus MXene/MOF separator for the all-in-one enhancement of lithium-sulfur batteries10.1016/j.ensm.2022.12.028 ↗
7. Zwitterionic separator featured with superdesolvating properties for high performance lithium–sulfur batteries
8. Lithium sulfonate-rich MOF modified separator enables high performance lithium–sulfur batteries
9. A two-in-one design realized by metal-organic framework nanosheets for dendrite-free and durable lithium-sulfur batteries
10. Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries10.1002/sus2.42 ↗
11. Rationally design a sulfur cathode with solid‐phase conversion mechanism for high cycle‐stable Li–S batteries10.1002/aenm.202003690 ↗
12. Nickel-plated sulfur nanocomposites for electrochemically stable high-loading sulfur cathodes in a lean-electrolyte lithium-sulfur cell10.1016/j.cej.2021.132257 ↗
13. Insight into the fading mechanism of the solid‐conversion sulfur cathodes and designing long cycle lithium–sulfur batteries10.1002/aenm.202102774 ↗
14. Recent progress of flexible sulfur cathode based on carbon host for lithium-sulfur batteries10.1016/j.jmst.2019.09.037 ↗
15. Towards high performance Li–S batteries via sulfonate‐rich COF‐modified separator10.1002/adma.202105178 ↗
16. Ultra-lightweight Ti3C2Tx MXene modified separator for Li–S batteries: thickness regulation enabled polysulfide inhibition and lithium ion transportation10.1016/j.jechem.2019.06.014 ↗
17. Inhibition of polysulfide shuttles in Li–S batteries: modified separators and solid‐state electrolytes10.1002/aenm.202000779 ↗
18. An atomic-confined-space separator for high performance lithium–sulfur batteries10.1039/C9TA11250B ↗
19. 3D catalytic MOF-based nanocomposite as separator coatings for high-performance Li-S battery10.1016/j.cej.2019.122701 ↗
20. Separator engineering toward practical Li-S batteries: Targeted electrocatalytic sulfur conversion, lithium plating regulation, and thermal tolerance10.1016/j.nanoen.2022.106982 ↗
21. Stable cycling of Li–S batteries by simultaneously suppressing Li-dendrite growth and polysulfide shuttling enabled by a bioinspired separator10.1039/C9TA12921A ↗
22. Co-based and Cu-based MOFs modified separators to strengthen the kinetics of redox reaction and inhibit lithium-dendrite for long-life lithium-sulfur batteries10.1016/j.cej.2020.124241 ↗
23. Celgard-supported LiX zeolite membrane as ion-permselective separator in lithium sulfur battery10.1016/j.memsci.2020.118386 ↗
24. An anionic‐MOF‐based bifunctional separator for regulating lithium deposition and suppressing polysulfides shuttle in Li–S batteries10.1002/smtd.202000082 ↗
25. Enhancing performance of Li–S batteries by coating separator with MnO@ yeast-derived carbon spheres10.1016/j.jallcom.2019.152723 ↗
26. Spider-web-inspired nanocomposite-modified separator: structural and chemical cooperativity inhibiting the shuttle effect in Li–S batteries
27. Tin sulfide modified separator as an efficient polysulfide trapper for stable cycling performance in Li–S batteries10.1039/C8NH00172C ↗
28. MOF-derived conductive carbon nitrides for separator-modified Li–S batteries and flexible supercapacitors10.1039/C9TA11958B ↗
29. N-doped carbon-coated hollow carbon nanofibers with interspersed TiO2 for integrated separator of Li-S batteries10.1016/j.electacta.2018.12.009 ↗
30. Cationic-polymer-functionalized separator as a high-efficiency polysulfide shuttle barrier for long-life Li–S battery10.1021/acsaem.1c00281 ↗
31. In situ interfacial polymerization of lithiophilic COF@ PP and POP@ PP separators with lower shuttle effect and higher ion transport for high-performance Li–S batteries10.1016/j.cej.2022.136352 ↗
32. Rationally designed NiS2-MnS/MoS2 hybridized 3D hollow N-Gr microsphere framework-modified celgard separator for highly efficient Li-S batteries10.1016/j.apcatb.2022.121934 ↗
33. Boosting the electrochemical performance of lithium-sulfur batteries by using a carbon black/LiMn2O4-modified separator10.1016/j.jallcom.2020.155251 ↗
34. Hydroxylated multi‐walled carbon nanotubes covalently modified with tris (hydroxypropyl) phosphine as a functional interlayer for advanced lithium–sulfur batteries
35. Excimer ultraviolet-irradiated graphene separator for suppressing polysulfide shuttling in Li–S batteries10.1016/j.jallcom.2022.163932 ↗
36. A separator modified with rutile titania and three‐dimensional interconnected graphene‐like carbon for advanced Li− S batteries10.1002/celc.202200301 ↗
37. ZnF2 doped porous carbon nanofibers as separator coating for stable lithium-metal batteries10.1016/j.cej.2021.130346 ↗
38. Porous and heterostructured molybdenum-based phosphide and oxide nanobelts assisted by the structural engineering to enhance polysulfide anchoring and conversion for lithium–sulfur batteries
39. YF3/CoF3 co-doped 1D carbon nanofibers with dual functions of lithium polysulfudes adsorption and efficient catalytic activity as a cathode for high-performance Li-S batteries10.1016/j.jcis.2021.09.079 ↗
40. Glass fiber separator coated by porous carbon nanofiber derived from immiscible PAN/PMMA for high-performance lithium-sulfur batteries10.1016/j.memsci.2018.01.062 ↗
41. Bio-assisted engineering of hierarchical porous carbon nanofiber host in-situ embedded with iron carbide nanocatalysts toward high-performance Li–S batteries10.1016/j.carbon.2021.02.073 ↗
42. Three-dimensional P-doped carbon skeleton with built-in Ni2P nanospheres as efficient polysulfides barrier for high-performance lithium-sulfur batteries10.1016/j.electacta.2019.03.190 ↗
43. Designing thermotolerant and flame-resistant PAN-based separator via surface engineering with heteroatoms doped carbon framework encapsulated with CoS2 nanocatalysts towards safe lithium-sulfur batteries10.1016/j.compositesb.2022.109644 ↗
44. Constructing a catalytic reservoir using cobalt nanoparticles-MoS2@ nitrogen doped carbon nanotubes on the separator to immobilize polysulfides and accelerate their conversion for lithium-sulfur batteries10.1016/j.cej.2022.136943 ↗
45. Lithium–sulfur batteries meet electrospinning: recent advances and the key parameters for high gravimetric and volume energy density
46. Bifunctional fluorinated separator enabling polysulfide trapping and Li deposition for lithium–sulfur batteries10.1021/acsami.0c22190 ↗
47. Metal–organic framework-derived nanoconfinements of CoF2 and mixed-conducting wiring for high-performance metal fluoride-lithium battery10.1021/acsnano.0c08918 ↗
48. Lithiophilic NiF2 coating inducing LiF-rich solid electrolyte interphase by a novel NF3 plasma treatment for highly stable Li metal anode10.1016/j.electacta.2021.139561 ↗
49. Multifunctional LaF3 doped pomegranate-like porous carbon nanofibers with high-speed transfer channel and strong polar interface for high stability lithium sulfur battery10.1016/j.cej.2020.126449 ↗
50. CeF(3)-doped porous carbon nanofibers as sulfur immobilizers in cathode material for high-performance lithium-sulfur batteries10.1021/acsami.7b19746 ↗
51. Surface modification of Li1.20Mn0.54Ni0.13Co0.13O2 cathode materials with SmF3 and the improved electrochemical properties10.1007/s10854-018-0047-4 ↗
52. A porous mooncake-shaped Li(4) Ti(5) O(12) anode material modified by SmF(3) and its electrochemical performance in lithium ion batteries10.1002/chem.202002095 ↗
53. Improving the electrochemical properties of Li1.2Mn0.52Co0.08Ni0.2O2 cathode material by uniform surface nanocoating with samarium fluoride through depositional-hydrothermal route10.1016/j.jallcom.2015.02.056 ↗
54. Multimodal capturing of polysulfides by phosphorus‐doped carbon composites for flexible high‐energy‐density lithium–sulfur batteries
55. Solid-solid synthesis and structural phase transition process of SmF310.1016/j.ssc.2018.01.016 ↗
56. Asymmetric N-coordinated iron single-atom catalysts supported on graphitic carbon for polysulfide conversion in lithium-sulfur batteries10.1016/j.cej.2022.140202 ↗
57. Amorphous CoP nanoparticle composites with nitrogen-doped hollow carbon nanospheres for synergetic anchoring and catalytic conversion of polysulfides in Li-S batteries10.1016/j.jcis.2021.06.059 ↗
58. Enabling superior electrochemical properties for highly efficient potassium storage by impregnating ultrafine Sb nanocrystals within nanochannel‐containing carbon nanofibers10.1002/anie.201908918 ↗
59. High specific surface area bimodal porous carbon derived from biomass reed flowers for high performance lithium-sulfur batteries10.1016/j.jcis.2020.02.062 ↗
60. Mitigating the polysulfides “shuttling” with TiO2 nanowires/nanosheets hybrid modified separators for robust lithium-sulfur batteries10.1016/j.cej.2020.124080 ↗
61. Improving polysulfides adsorption and redox kinetics by the Co4N nanoparticle/N‐doped carbon composites for lithium‐sulfur batteries10.1002/smll.201901454 ↗
62. N-doped carbon-embedded TiN nanowires as a multifunctional separator for Li–S batteries with enhanced rate capability and cycle stability10.1016/j.jechem.2020.08.050 ↗
63. Oxygen-plasma-treated Fe–N–C catalysts with dual binding sites for enhanced electrocatalytic polysulfide conversion in lithium–sulfur batteries10.1021/acsenergylett.2c01132 ↗
64. Cooperative electronic structure modulator of Fe single-atom electrocatalyst for high energy and long cycle Li–S pouch cell10.1002/adma.202208999 ↗
65. Interface engineering toward expedited Li2S deposition in lithium–sulfur batteries: a critical review10.1002/adma.202211168 ↗
66. Ultralight layer‐by‐layer self‐assembled MoS2‐polymer modified separator for simultaneously trapping polysulfides and suppressing lithium dendrites10.1002/aenm.201802430 ↗
67. Confinement and electrocatalysis of cerium fluoride nanocages to boost the lithium–sulfur batteries performance10.1002/sstr.202200050 ↗
68. Mo2N quantum dots decorated N‐doped graphene nanosheets as dual‐functional interlayer for dendrite‐free and shuttle‐free lithium‐sulfur batteries10.1002/adfm.202206113 ↗
69. Phosphorus modulated porous CeO2 nanocrystallines for accelerated polysulfide catalysis in advanced Li-S batteries10.1016/j.jmst.2022.06.004 ↗
70. Insights into dendrite suppression by alloys and the fabrication of a flexible alloy-polymer protected lithium metal anode10.1016/j.ensm.2020.07.039 ↗
71. Preparation of Sm2Fe17 alloy and induced mechanism by calciothermic reduction10.1016/j.mseb.2021.115447 ↗
72. Nickel–platinum alloy nanocrystallites with high‐index facets as highly effective core catalyst for lithium–sulfur batteries
73. A multifunctional SnO2-nanowires/carbon composite interlayer for high-performance lithium-sulfur batteries10.1016/j.cej.2020.126042 ↗
74. Hollow molybdate microspheres as catalytic hosts for enhancing the electrochemical performance of sulfur cathode under high sulfur loading and lean electrolyte
75. A dual‐functional conductive framework embedded with TiN‐VN heterostructures for highly efficient polysulfide and lithium regulation toward stable Li–S full batteries10.1002/adma.201905658 ↗