journal article·2015-09

Synthesis and characterisation of (Fe,Co)2–3B microcrystalline alloys

Wolfgang Wallisch, Josef Fidler, Peter Toson, Herbert Sassik, Robert Svagera, Johannes Bernardi

Publisher page

Abstract

Abstract The promising high magnetocrystalline anisotropy of about K 1 > 0.4 MJ/m 3 has been derived for (Fe,Co) 2–3 B melt-spun ribbons leading to a potential candidate for novel hard magnetic applications. We present the microstructural and magnetic analysis of the phase relations in various microcrystalline alloys with a nominal composition of (Fe 1− x Co x ) 71 B 29 (0 ⩽ x ⩽ 1) by means of SEM and TEM investigations. The melt-spun ribbons were prepared at different wheel speeds (18–38 m/s) and annealed at 500 °C for one hour. The optimum hard magnetic properties were obtained for (Fe 0.7 Co 0.3 ) 71 B 29 at 26.7 m/s. The crystal anisotropy and saturation polarisation have been confirmed by DFT calculations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Metallic Glasses and Amorphous Alloys · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
2. Magnetocrystalline anisotropy in (Fe1−xCox)2B system10.1143/JJAP.9.415 ↗
3. Mossbauer study of the intermetallic compounds (Fe1−xCox)2B and (Fe1−xCox)B10.1088/0305-4608/5/4/021 ↗
4. Magnetocrystalline anisotropy of Fe3B, Fe2B and Fe1.4Co0.6B as studied by Lorentz electron microscopy, singular point detection and magnetization measurements10.1016/0304-8853(91)90627-M ↗
5. Towards high-performance permanent magnets without rare earths10.1088/0953-8984/26/6/064205 ↗
6. Magnetic properties of (Fe,Co)2B alloys with easy-axis anisotropy10.1109/TMAG.2014.2321458 ↗
7. K.D. Belashchenko, L. Ke, M. Däne, L.X. Benedict, T.N. Lamichhane, V. Taufour, A. Jesche, S.L. Bud’ko, P.C. Canfield, V.P. Antropov, Origin of magnetocrystalline anisotropy in (Fe1−xCox)2B alloys, arXiv:1501.03483, 2015.
8. A. Edström, M. Werwiński, J. Rusz, O. Eriksson, K. Skokov, I. Radulov, S. Ener, M. Kuz’min, J. Hong, M. Fries, D. Yu. Karpenkov, O. Gutfleisch, P. Toson, J. Fidler, Effect of doping by 5d elements on magnetic properties of (Fe1-xCox)2B alloys, 2015, arXiv:1502.05916.
9. Thermodynamic optimization of the boron–cobalt–iron system10.1016/j.jallcom.2011.01.170 ↗
10. B–Co–Fe (Boron–Cobalt–Iron)
11. Villars · 1991
12. Structure and embrittlement of metallic glasses10.1016/S0921-5093(97)80087-1 ↗
13. Magnetic properties of amorphous alloys10.1146/annurev.ms.08.080178.002231 ↗
14. Influence of processing on the ductile-to-brittle transition temperature of an Fe–B–Si metallic glass10.1016/S1359-6454(96)00160-7 ↗
15. The effect of the melt-spinning processing parameters on the rate of cooling10.1016/S0921-5093(01)01346-6 ↗
16. Quantum density oscillations in an inhomogeneous electron gas10.1103/PhysRev.137.A1697 ↗
17. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
18. Solid state calculations using WIEN2k10.1016/S0927-0256(03)00112-5 ↗
19. Pair-distribution function and its coupling-constant average for the spin-polarized electron gas10.1103/PhysRevB.46.12947 ↗