journal article·2016-08

Effects of heating rate and metal binder on the microstructure and mechanical properties of self-diffusion gradient cermet composite tool materials

Wenbin Ji, Bin Zou, Chuanzhen Huang, Jun Wang, Kaitao Xu, Yanan Liu, Changming Huang

Publisher page

Abstract

Abstract Self-diffusion gradient cermet composite tool materials with different metal binder contents and Ni/(Co + Ni) mass ratios were fabricated to improve the mechanical properties. The effects of heating rate and metal binder on the microstructure and mechanical properties of self-diffusion gradient composite were investigated. For the heating rates considered, it was revealed that the heating rate of 30 °C / min was in the vicinity of optimum to yield the desired mechanical properties and fine microstructure. It was found that the flexural strength increased and the hardness decreased with increasing Ni binder content, while the addition of Co binder led to an excessively thick rim phase which was detrimental to the flexural strength. Applying a proper amount of Ni binder appeared to be beneficial for fabricating gradient composites with desired self-diffusion process during sintering. For the experimental conditions considered in this study, the best mechanical properties can be obtained when 6 mass% Ni in the surface and 12 mass% Ni in the substrate were used, which gave flexural strength, substrate hardness and surface hardness at 1488 ± 190 MPa, 20.96 ± 0.30 GPa and 25.12 ± 0.48 GPa, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Effect of the green state on the sintering of Ti(C,N)-based cermets10.1016/0924-0136(95)01914-6 ↗
2. Development of a graded TiCN coating for cemented carbide cutting tools—a design approach10.1016/0043-1648(95)06635-7 ↗
3. Ti(C,N) cermets—metallurgy and properties10.1016/0263-4368(95)00027-G ↗
4. Development of TiCN-based cermets: mechanical properties and wear mechanism10.1016/j.ijrmhm.2012.07.001 ↗
5. Ultrafine (Ti, M)(C, N)-based cermets with optimal mechanical properties10.1016/j.ijrmhm.2010.08.007 ↗
6. Effects of sintering processes on mechanical properties and microstructure of TiB2–TiC+8wt% nano-Ni composite ceramic cutting tool material10.1016/j.msea.2012.02.002 ↗
7. Fabrication and characterization of TiB2/TiC composites10.1016/j.ijrmhm.2014.03.004 ↗
8. Effects of superfine refractory carbide additives on microstructure and mechanical properties of TiB2–TiC+Al2O3 composite ceramic cutting tool materials10.1016/j.jallcom.2013.09.119 ↗
9. Microstructure–mechanical properties relations in SiC–TiB2 composite10.1016/j.matchemphys.2012.01.007 ↗
10. TiC–TiB2 composites: a review of phase relationships, processing and properties10.1016/j.jeurceramsoc.2007.11.011 ↗
11. Effect of binder content on relative density, microstructure and properties of complex cemented carbides obtained by thermal explosion-pressing10.1016/j.jallcom.2009.07.105 ↗
12. Effect of (Ni, Mo) and TiN on the microstructure and mechanical properties of TiB2 ceramic tool materials10.1016/j.msea.2006.07.012 ↗
13. In situ production of ultra-fine Ti(C,N)–TiB2–Co cermets by reactive hot processing from the Co–Ti–C–BN system10.1016/j.ijrmhm.2015.11.003 ↗
14. Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2/TiN tool material10.1016/j.msea.2012.03.002 ↗
15. Characterisation of composite of TiC+TiB2 bonded with nickel based binder alloy: mechanical and microstructural properties10.1179/pom.1995.38.1.39 ↗
16. The role of molybdenum in the hard-phase grains of (Ti, Mo)(C, N)-Co cermets10.1080/14786430310001659516 ↗
17. Effect of molybdenum content on the microstructure and mechanical properties of ultra-fine Ti(C,N) based cermets10.1016/j.matchar.2008.03.008 ↗
18. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet – a review10.1016/j.matdes.2014.10.081 ↗
19. Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2 ceramics10.1016/S0955-2219(01)00424-1 ↗
20. Effects of sintering processes on mechanical properties and microstructure of Ti(C,N)–TiB2–Ni composite ceramic cutting tool material10.1016/j.ceramint.2014.08.003 ↗
21. Shaw · 2005
22. Study on microstructure and its formation mechanism, and mechanical properties of TiB2–TiC laminated Ti(C5N5) composite ceramic cutting tool material10.1016/j.ijrmhm.2013.09.002 ↗
23. Effects of metal phases and carbides on the microstructure and mechanical properties of Ti(C,N)-based cermets cutting tool materials10.1016/j.msea.2014.09.052 ↗
24. Study of a hot-pressed sintering preparation of Ti(C7N3)-based composite cermets materials and their performance as cutting tools10.1016/j.jallcom.2014.05.150 ↗
25. Effects of sintering processes on the mechanical properties and microstructure of Ti(C,N)-based cermet cutting tool materials10.1016/j.ijrmhm.2014.06.023 ↗
26. A comparative study of titanium nitrides, TiN, TiNbN and TiCN, as coatings for biomedical applications10.1016/j.surfcoat.2009.06.010 ↗
27. Study on the formation of core–rim structure in Ti(CN)-based cermets10.1016/j.ijrmhm.2012.03.012 ↗
28. Formation of core/rim structures in Ti(C,N)-WC-Ni cermets via a dissolution and precipitation process10.1111/j.1151-2916.2000.tb01415.x ↗
29. Laminar ceramic composites10.1016/0955-2219(95)93055-8 ↗
30. Functionally graded hardmetals10.1016/S0925-8388(02)00232-3 ↗
31. Effect of large thicknesses on the characteristics of laminated ZrO–Zr2CN/Si3N4 ceramics by reactive hot pressing10.1016/j.jallcom.2015.10.012 ↗