journal article·2018-01Open access

Phase separated characteristics and soft magnetic properties of [Cu0.6(FeCrC)0.4]100−xSix immiscible composites by laser induction hybrid cladding

Shengfeng Zhou, Xiaoqin Dai, Chunxia Wang, Min Xie, Jiaoxi Yang, Zhengyang Li

Abstract

Abstract The effect of Si addition on phase separation and soft magnetic properties of [Cu0.6(FeCrC)0.4]100-xSix (x = 3 and 8) immiscible composites produced by laser induction hybrid cladding (LIHC) has been investigated. The duplex structure of immiscible composites was composed of many Fe-rich particles dispersed within Cu-rich upper layer and large amounts of Cu-rich particles embedded within Fe-rich lower layer. However, the increasing Si addition not only induced the precipitation of intermetallic compound Cu6.69Si within Cu-rich upper layer, but also increased the area of Fe-rich layer, the size of Fe- and Cu-rich particles, as well as the solubility of Si in Fe- and Cu-rich phases. Moreover, the microhardness of Fe- and Cu-rich layers was increased to 747.3HV0.2 and 302.6HV0.2 in the Cu55.2(FeCrC)36.8Si8 immiscible composite, respectively, which was ∼1.6 and ∼1.8 times higher than that in the Cu58.2(FeCrC)38.8Si3 immiscible composite, due to solid-solution strengthening and dispersion strengthening. Compared to the Cu58.2(FeCrC)38.8Si3 immiscible composite, the Cu55.2(FeCrC)36.8Si8 immiscible composite presented a saturated magnetization of 13.7 emu/g, relatively lower coercivity of 24.9 Oe and higher Curie temperature of larger than 400 K due to appearance of ferromagnetic α-Fe(Si) phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu-Fe alloys10.1016/j.actamat.2005.12.023 ↗
2. Effect of supercooling and cooling rate on the microstructure of Cu-Co-Fe alloys10.1007/s10853-006-5598-8 ↗
3. Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immisicible alloys10.1016/j.actamat.2012.10.033 ↗
4. Microstructural evolution of alloy powder for electronic materials with liquid miscible gap10.1007/s11664-008-0537-x ↗
5. Microstructure and phase selection in supercooled cooper alloys exhibiting metastable liquid miscibility gaps10.1007/s10853-012-6354-x ↗
6. Behavior of Fe-rich phase during rapid solidification of Cu-Fe hypoperitectic alloy10.1016/j.msea.2005.05.045 ↗
7. Influence of Al addition on microstructure and properties of Cu-Fe-based coatings by laser induction hybrid rapid cladding10.1557/jmr.2014.64 ↗
8. Experimental investigation and thermodynamic reassessment of the Cu-Fe-Si system10.1007/s11661-009-9877-2 ↗
9. The microstructure of liquid immiscible Fe-Cu-based in situ formed amorphous/crystalline composite10.1016/j.scriptamat.2006.03.019 ↗
10. Formation of amorphous phase with crystalline globules in Fe-Cu-Nb-B immiscible alloys10.1016/j.jallcom.2014.08.229 ↗
11. Phase separation and subsequent solidification of peritectic Fe-Cu-Ge alloys subjected to substantial undercooling processing10.1016/j.jallcom.2017.04.220 ↗
12. Liquid phase separation and rapid dendritic growth of highly undercooled ternary Fe62.5Cu27.5Sn10 alloy10.1063/1.4907214 ↗
13. Surface tension of liquid ternary Fe-Cu-Mo alloys measured by electromagnetic levitation oscillating drop method
14. High-efficiency control of phase separation in Al-based immiscible alloys10.1016/j.jallcom.2015.03.194 ↗
15. Formation of immiscible alloy powders with egg-type microstructure10.1126/science.1073050 ↗
16. Microstructure and properties of the in situ formed amorphous-crystalline composites in the Fe-Cu-based immiscible alloys10.1016/j.jallcom.2011.01.203 ↗
17. Formation of nanoglobules with core-shell structure by liquid phase separation in Fe-Cu-Zr-B immiscible alloy10.1016/j.jallcom.2014.08.138 ↗
18. Combustion synthesis immiscible nanostructured Fe-Cu alloy10.1016/j.jallcom.2009.04.016 ↗
19. Carbon nanotube- and Fep-reinforced copper-matrix composites by laser induction hybrid rapid cladding10.1016/j.scriptamat.2013.12.006 ↗
20. Effect of substrate types on the microstructure and properties of Cu65Fe35 composite coatings by laser induction hybrid cladding10.1016/j.jallcom.2017.06.064 ↗
21. Microstructure evolution of phase separated Fe-Cu-Cr-C coatings by laser induction hybrid cladding10.1016/j.surfcoat.2017.06.032 ↗
22. Phase diagram of Fe-Cu-Si ternary system above 1523 K10.1361/105497199770335695 ↗
23. Effect of silicon on microstructure and mechanical properties of Cu-Fe alloys10.1016/j.jallcom.2016.12.352 ↗
24. Solute redistribution during phase separation of ternary Fe-Cu-Si alloy10.1007/s00339-015-9059-6 ↗
25. Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding10.1016/j.msea.2007.07.058 ↗
26. Liquid separation effects in Fe-Cu alloys solidified under different cooling rates10.1007/BF02654269 ↗
27. Rapid solidification of bulk undercooled hypoperitectic Fe-Cu alloy10.1016/j.jallcom.2006.03.012 ↗
28. Thermodynamic analysis of the iron-copper system I: the stable and metastable phase equilibria10.1007/BF02664905 ↗
29. Energy redistribution during CO2 laser cladding10.2351/1.1471565 ↗
30. Effects of processing parameters on structure of Ni-based WC composite coatings during laser induction hybrid rapid cladding10.1016/j.apsusc.2009.05.161 ↗
31. Theory of viscosity of liquids10.1080/14786443409462409 ↗
32. Effect of Ce addition on macroscopic core-shell10.1016/j.matlet.2010.01.018 ↗
33. A new coarsening mechanism of droplet spinodal decomposition10.1063/1.469658 ↗
34. Effect of disorder on the structural and magnetic properties of the Fe50Si50 nanostructured system10.1016/j.jallcom.2014.12.277 ↗
35. Slater-pauling curve of Fe-Cu solid solution alloys10.1103/PhysRevB.66.132407 ↗
36. Effect of isothermal treatments on the magnetic behavior of nanocrystalline Cu-Ni-Fe alloy prepared by mechanical alloying10.1016/j.jmmm.2006.07.011 ↗