A micro-structural distortion mechanism on the thermal degradation of Y3Al5O12:Ce3+ phosphor
Source abstract
Abstract
Abstract The thermal degradation is one of the key problems that restricting the working properties and lifetime of Y 3 Al 5 O 12 :Ce 3+ phosphor for white light-emitting diode (LED) application. To clarify its thermal degradation mechanism, a heat-treatment process was carried out, and the effects of heat-treatment temperature on the luminescent intensity and micro-structure changes were investigated. Based on the evidences about micro-structural distortion detected by XRD, IR, TL and XPS, the relationship between luminescent intensity and micro-structure change was founded, and a micro-structural distortion mechanism on the thermal degradation was proposed. The emission intensity decreased with the increasing heat-treatment temperature, which was an accelerated thermal degradation. The intensities of two thermoluminescence peaks at 112 °C and 248 °C also decreased with the increasing heat-treatment temperature and towards zero. This indicated that the corresponding defects levels were gradually eliminated and a micro-structural distortion occurred. X-ray photoelectric spectroscopy results showed small part of trivalent cerium ions were oxidized to tetravalent cerium ions, and alumina tetrahedral were gradually transformed into alumina octahedron. Therefore, the thermal degradation was jointly caused by the oxidation of Ce 3+ and the distortion of micro-structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Radiation Detection and Scintillator Technologies · Terahertz technology and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Recent development in rare earth doped phosphors for white light emitting diodes10.1016/S1002-0721(14)60375-6 ↗
2. Measurement and numerical studies of optical properties of YAG: Ce phosphor for white light-emitting diode packaging10.1364/AO.49.000247 ↗
3. Insight into the thermal quenching mechanism for Y3Al5O12:Ce3+ through thermoluminescence excitation spectroscopy10.1021/acs.jpcc.5b08828 ↗
4. Thermostability and photostability of Sr3SiO5:Eu2+ phosphors for white LED applications10.1016/j.jssc.2014.12.005 ↗
5. Moisture-induced degradation and its mechanism of (Sr,Ca)AlSiN3:Eu2+, a red-color-converter for solid state lighting10.1039/C4TC02824D ↗
6. Structural analysis of thermal degradation and regeneration in blue phosphor BaMgAl10O17:Eu2+ based upon cation diffusion10.1016/j.ssi.2013.08.024 ↗
7. Investigation of the degradation mechanisms in BaMgAl10O17:Eu2+ phosphor: on the influence of thermal process on operational durability10.1007/s00340-009-3779-2 ↗
8. Luminescence quenching in thermally-treated barium magnesium aluminate phosphor10.1063/1.1504866 ↗
9. Thermal treatment effects on degradation of BaMgAl10O17:Eu2+ phosphor for PDP10.1016/j.mseb.2008.04.005 ↗
10. Investigation of the degradation mechanisms in BaMgAl10O17:Eu2+ phosphor: on the influence of thermal process on operational durability10.1007/s00340-009-3779-2 ↗
11. Afterglow and thermoluminescence properties of Lu2SiO5:Ce scintillation crystals10.1088/0953-8984/6/22/016 ↗
12. Structural and optical properties of YAG: Ce3+ phosphors by sol–gel combustion method10.1016/j.jcrysgro.2005.01.072 ↗