Nitrogen, Oxygen and Cobalt multiple-doped graphitized mesoporous carbon as a cost-effective carbon host with high sulfur content for lithium-sulfur batteries
Source abstract
Abstract
Abstract The development of facile, inexpensive and large-scale methods to prepare carbon scaffolds with high sulfur content is crucial to the practical applications of Li-S Battery. Herein, Nitrogen, Oxygen and Cobalt multiple-doped graphitized mesoporous carbon sulfur composites (N-O-Co-C/S) with high sulfur content (90%) are developed via inexpensive carbonization methods. The composites exhibit superior performance with a capacity of 610 mAh g−1 at a current of 0.5 C after 200 cycles and 302 mAh g−1 at a current of 2 C after 1400 cycles. The superior performance of N-O-Co-C/S composites can be attributed to the enhanced electrical conductivity and ionic conductivity of Co-N-O-C/S composites, which can be supported by electrochemical impedance spectroscopy measurement. The polysulfide-trapping was mainly attributed to the strong O-S, N-S and Co-S interactions, thus improving the e electrochemical performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Directly coating a multifunctional interlayer on the cathode via electrospinning for advanced lithium-sulfur batteries10.1021/acsami.7b08804 ↗
2. Flexible and hierarchically structured sulfur composite cathode based on the carbonized textile for high-performance Li-S batteries10.1021/acsami.7b16174 ↗
3. A high-volumetric-capacity cathode based on interconnected close-packed N-doped porous carbon nanospheres for long-life Lithium-sulfur batteries10.1002/aenm.201701082 ↗
4. The fusion of imidazolium-based ionic polymer and carbon nanotubes: one type of new heteroatom-doped carbon precursors for high-performance lithium-sulfur batteries10.1002/adfm.201703936 ↗
5. A facile and scalable method to prepare carbon nanotube-grafted-graphene for high performance Li-S battery10.1016/j.jpowsour.2016.11.038 ↗
6. Ultra-microporous carbons encapsulate small sulfur molecules for high performance lithium-sulfur battery10.1016/j.nanoen.2017.01.060 ↗
7. A Mixed microporous/low-range mesoporous composite with high sulfur loading from hierarchically-structured carbon for lithium sulfur batteries10.1016/j.electacta.2017.01.174 ↗
8. A Flexible nanostructured paper of a reduced graphene oxide-sulfur composite for high-performance lithium-sulfur batteries with unconventional configurations10.1002/adma.201602262 ↗
9. Enhanced performances of Li/polysulfide batteries with 3D reduced graphene oxide/carbon nanotube hybrid aerogel as the polysulfide host10.1016/j.nanoen.2016.10.015 ↗
10. Wet Chemistry of multidimensional nanocarbon-sulfur hybrid materials with ultrahigh sulfur loading for lithium-sulfur batteries10.1021/acsami.5b07468 ↗
11. Fabricating three-dimensional hierarchical porous N-doped graphene by a tunable assembly method for interlayer assisted lithium-sulfur batteries10.1016/j.cej.2017.06.164 ↗
12. Coralline-like N-doped hierarchically porous carbon derived from enteromorpha as a host matrix for lithium-sulfur battery10.1002/chem.201703357 ↗
13. Sole chemical confinement of polysulfides on nonporous nitrogen/oxygen dual-doped carbon at the kilogram scale for lithium-sulfur batteries10.1002/adfm.201604265 ↗
14. From Metal-organic framework to Li2S@C-Co-N nanoporous Architecture: a high-capacity cathode for lithium-sulfur batteries10.1021/acsnano.6b05696 ↗
15. Copper-stabilized sulfur-microporous carbon cathodes for Li-S batteries10.1002/adfm.201304156 ↗
16. Ternary hybrid material for high-performance lithium-sulfur battery10.1021/jacs.5b07071 ↗
17. Chen · Nano energy · 2017 · 38 · 239
18. Catalytic graphitization in nanocast carbon monoliths by iron, cobalt and nickel nanoparticles10.1016/j.carbon.2018.04.002 ↗
19. Confined self-assembly in two-dimensional interlayer space: monolayered mesoporous carbon nanosheets with in-plane orderly arranged mesopores and a highly graphitized framework10.1002/anie.201712959 ↗
20. Reduced graphene oxide wrapped MOFs-derived cobalt-doped porous carbon polyhedrons as sulfur immobilizers as cathodes for high performance lithium sulfur batteries10.1016/j.nanoen.2016.02.049 ↗
21. A flexible nanostructured paper of a reduced graphene oxide-sulfur composite for high-performance lithium-sulfur batteries with unconventional configurations10.1002/adma.201602262 ↗
22. Heteroatom doped-carbon nanospheres as anodes in lithium ion batteries10.3390/ma9010035 ↗
23. Hierarchically porous carbon derived from banana peel for lithium sulfur battery with high areal and gravimetric sulfur loading10.1016/j.jpowsour.2017.07.038 ↗
24. Fabrication of N-doped graphene-carbon nanotube hybrids from Prussian blue for lithium-sulfur batteries10.1002/aenm.201602014 ↗
25. N-doped yolk-shell hollow carbon sphere wrapped with graphene as sulfur host for high-performance lithium-sulfur batteries10.1016/j.apsusc.2017.06.288 ↗
26. Hierarchical hollow microspheres grafted with Co nanoparticle-embedded bamboo-like N-doped carbon nanotube bundles as ultrahigh rate and long-life cathodes for rechargeable lithium-oxygen batteries10.1016/j.cej.2017.12.018 ↗
27. A honeycomb-like Co@N-C composite for ultrahigh sulfur loading Li-S batteries10.1021/acsnano.7b06061 ↗
28. Amorphous CoS nanoparticle/reduced graphene oxide composite as high-performance anode material for sodium-ion batteries10.1016/j.ceramint.2017.04.128 ↗
29. A thermally Decomposable template route to synthesize nitrogen-doped wrinkled carbon nanosheets as highly efficient and stable electrocatalysts for the oxygen reduction reaction10.1021/acssuschemeng.7b03370 ↗
30. Pyridinic-nitrogen-dominated graphene aerogels with Fe−N−C coordination for highly efficient oxygen reduction reaction10.1002/adfm.201601492 ↗
31. Graphene papers: smart architecture and specific functionalization for biomimetics, electrocatalytic sensing and energy storage10.1039/C6QM00145A ↗
32. A sulfur host based on cobalt-graphitic carbon nanocages for high performance lithium-sulfur batteries10.1039/C7TA08483H ↗
33. Enhanced performance of lithium-sulfur batteries with high sulfur loading utilizing ion selective MWCNT/SPANI modified separator10.1016/j.cej.2017.08.015 ↗
34. Scalable synthesis of honeycomb-like ordered mesoporous carbon nanosheets and their application in lithium-sulfur batteries10.1021/acsami.6b13370 ↗
35. Review on high-loading and high-energy lithium-sulfur batteries10.1002/aenm.201700260 ↗
36. Single-wall carbon nanotube network enabled ultrahigh sulfur-content electrodes for high-performance lithium-sulfur batteries10.1016/j.nanoen.2017.10.053 ↗
37. A sodium-ion battery with a low-cost cross-linked gel-polymer electrolyte10.1002/aenm.201600467 ↗
38. Cross-linked chitosan as a polymer network binder for an antimony anode in sodium-ion batteries10.1002/aenm.201502130 ↗
39. New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy10.1016/j.jpowsour.2008.10.033 ↗
40. A mixed microporous/Low-range mesoporous composite with high sulfur loading from hierarchically-structured carbon for lithium sulfur batteries10.1016/j.electacta.2017.01.174 ↗
41. Self-assembled graphene/sulfur composite as high current discharge cathode for lithium-sulfur batteries10.1016/j.electacta.2015.02.131 ↗
42. Sulfur impregnated N, P co-doped hierarchical porous carbon as cathode for high performance Li-S batteries10.1016/j.jpowsour.2016.12.008 ↗
43. Fabrication of boron-doped porous carbon with termite nest shape via natural macromolecule and borax to obtain lithium-sulfur/sodium-ion batteries with improved rate performance10.1016/j.electacta.2017.05.090 ↗
44. Highly efficient retention of polysulfide in “Sen Urchin”-Like carbon nanotube/nanopolyhedra superstructures as cathode material for ultralong-life lithium-sulfur batteries10.1021/acs.nanolett.6b04433 ↗
45. Synthesizing nitrogen-doped porous carbon@sulfur cathode for high-performance and stable cycling Li-S batteries10.1016/j.jallcom.2016.08.320 ↗
46. A plastic–crystal electrolyte interphase for all-solid-state sodium batteries10.1002/anie.201702003 ↗
47. Stabilizing a high-energy-density rechargeable sodium battery with a solid electrolyte10.1016/j.chempr.2018.01.007 ↗
48. Gao · 2018 · vol. 57 · 5449