Realizing an enhanced Seebeck coefficient and extremely low thermal conductivity in anharmonic Sb-substituted SnSe nanostructures
Source abstract
Abstract
Tin selenide (SnSe), an important thermoelectric material in the IV-VI chalcogenide family, has attracted significant attention for Thermoelectric power generation in the mid to high temperature (600–900 K) region. Herein, we report extremely low thermal conductivity and improved thermoelectric performance of polycrystalline SnSe through Sb substitution. Polycrystalline Sn 1−xSb x Se (x = 0.01–0.05) was synthesized through a hydrothermal method followed through cold pressing technique. The existence of lone pair electrons induced the high lattice anharmonicity in Sb substituted SnSe, which reduced the thermal conductivity from enhanced the phonon scattering. Increasing Sb concentration drastically decreases the thermal conductivity to 0.23 W/mK at 640 K. Moreover, Sb substitution simultaneously enhanced the Seebeck coefficient 400 µV/K and the electrical conductivity value of 660 S/m at 550 K for X = 0.05 sample. It is observed that the aliovalent Sb substitution in the polycrystalline SnSe matrix exhibits an extreme reduction in thermal conductivity, which leads to high thermoelectric performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Ultralow thermal conductivity, enhanced mechanical stability, and high thermoelectric performance in (GeTe)1-2 x(SnSe)x(SnS)x10.1021/jacs.0c11015 ↗
2. Complex thermoelectric materials
3. Thermoelectric materials, phenomena, and applications: a bird’s eye view10.1557/mrs2006.44 ↗
4. Cu-based thermoelectric materials10.1016/j.ensm.2016.01.009 ↗
5. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states10.1126/science.1159725 ↗
6. Convergence of electronic bands for high performance bulk thermoelectrics10.1038/nature09996 ↗
7. Enhanced thermoelectric properties through minority carriers blocking in nanocomposites10.1063/1.5118981 ↗
8. Energy filtering of charge carriers: current trends, challenges, and prospects for thermoelectric materials10.1002/adfm.201901789 ↗
9. High-performance SnSe thermoelectric materials: progress and future challenge10.1016/j.pmatsci.2018.04.005 ↗
10. New directions for low-dimensional thermoelectric materials10.1002/adma.200600527 ↗
11. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
12. Towards higher thermoelectric performance of Bi2Te3 via defect engineering10.1016/j.scriptamat.2015.06.031 ↗
13. Germanium chalcogenide thermoelectrics: electronic structure modulation and low lattice thermal conductivity10.1021/acs.chemmater.8b02676 ↗
14. Thermoelectric enhancements in PbTe alloys due to dislocation-induced strains and converged bands10.1002/advs.201902628 ↗
15. High thermoelectric performance in SnTe nanocomposites with all-scale hierarchical structures10.1021/acsami.0c03349 ↗
16. Highly converged valence bands and ultralow lattice thermal conductivity for high‐performance SnTe thermoelectrics10.1002/ange.202003946 ↗
17. Flexible ternary carbon black/Bi2Te3 based alloy/polylactic acid thermoelectric composites fabricated by additive manufacturing
18. Achieving a high average zT value in Sb2Te3-based segmented thermoelectric materials10.1021/acsami.9b19798 ↗
19. Upper crustal abundances of trace elements: a revision and update10.1016/j.chemgeo.2008.05.010 ↗
20. Liquid exfoliation few-layer SnSe nanosheets with tunable band gap10.1021/acs.jpcc.7b06096 ↗
21. High-performance thermoelectric SnSe: aqueous synthesis, innovations, and challenges10.1002/advs.201902923 ↗
22. Thermoelectric properties of p-type sb-doped Cu2SnSe3 near room and mid temperature applications10.1007/s00339-017-1540-y ↗
23. Ultrahigh average ZT realized in p-Type SnSe crystalline thermoelectrics through producing extrinsic vacancies10.1021/jacs.0c01726 ↗
24. Ternary CuSbSe2 chalcostibite: facile synthesis, electronic-structure and thermoelectric performance enhancement10.1039/C6TA00039H ↗
25. Synergistic effect of grain boundaries and phonon engineering in Sb substituted Bi2Se3nanostructures for thermoelectric applications10.1016/j.jcis.2021.12.027 ↗
26. Nanostructuring, carrier engineering and bond anharmonicity synergistically boost the thermoelectric performance of p-type AgSbSe2-ZnSe10.1039/c3ta14901c ↗
27. Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal10.1038/s41563-021-01064-6 ↗
28. Synthesis of colloidal SnSe quantum dots by electron beam irradiation10.1016/j.radphyschem.2011.04.017 ↗
29. Thermoelectric SnS and SnS-SnSe solid solutions prepared by mechanical alloying and spark plasma sintering: Anisotropic thermoelectric properties10.1038/srep43262 ↗
30. Hydrothermal processing of materials: past, present and future10.1007/s10853-007-1853-x ↗
31. Investigating the thermoelectric performance of n-type SnSe: The synergistic effect of NbCl5doping and dislocation engineering10.1039/D0TC02959A ↗
32. Realizing high thermoelectric performance in n-type highly distorted Sb-Doped SnSe microplates via tuning high electron concentration and inducing intensive crystal defects10.1002/aenm.201800775 ↗
33. Synergistic effect of indium nano-inclusions to enhance interface phonon scattering in polycrystalline SnSe for thermoelectric applications10.1016/j.jallcom.2020.157358 ↗
34. X-ray photoelectron spectra and electronic structure of quasi-one-dimensional SbSel crystals10.5488/CMP.10.1.101 ↗
35. Cation disorder and bond anharmonicity synergistically boosts the thermoelectric performance of p-type AgSbSe 210.1039/D1CE00599E ↗
36. Contributions of chemical potential to the diffusive Seebeck coefficient for bulk semiconductor materials
37. Estimation of the thermal band gap of a semiconductor from Seebeck measurements10.1007/s11664-999-0211-y ↗
38. Studies on nanocrystalline Ag2Se10.1080/10426910600611805 ↗
39. Anharmonicity in the high-temperature cmcm phase of SnSe: soft modes and three-phonon interactions10.1103/PhysRevLett.117.075502 ↗
40. Orbitally driven giant phonon anharmonicity in SnSe10.1038/nphys3492 ↗
41. The anharmonicity blacksmith10.1038/nphys3542 ↗
42. Low thermal conductivity and optimized thermoelectric properties of p-Type Te-Sb2Se3: synergistic effect of doping and defect engineering10.1021/acsami.9b07313 ↗
43. Strategies for engineering phonon transport in thermoelectrics10.1039/C5TC01670C ↗
44. Advanced thermoelectric design: From materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
45. Dislocation analysis in sige heterostructures by large-angle convergent beam electron diffraction
46. Giant Seebeck effect in Ge-doped SnSe10.1038/srep26774 ↗
47. A. Das, M. Talukdar, A. Kumar, K.J. Sarkar, P. Dhama, P. Banerji, Thermoelectric study of Ag doped SnSe-Sb2Se3 based alloy, AIP Conf. Proc. 1953, 2018. 〈https://doi.org/10.1063/1.5032678〉.10.1063/1.5032678 ↗
48. Boosting the thermoelectric performance of p-type heavily Cu-doped polycrystalline SnSe: Via inducing intensive crystal imperfections and defect phonon scattering10.1039/C8SC02397B ↗
49. Lone pair electrons minimize lattice thermal conductivity10.1039/C2EE23391F ↗
50. Manipulation of phonon transport in thermoelectrics