journal article·2025-03-01Open access

Magnetic anisotropy investigation of grain-oriented electrical steels for a wide range of temperatures

Zhiye Li, Yuxiao Li, Yiwei Qin, Xiaodong Hu, Xiaoyu Liu, Ruilin Pei, Lubin Zeng

AIP Advances· Volume 15· Issue 3

Abstract

Grain oriented electrical steel (GOES) has the advantages of high permeability, low iron loss and high saturation flux density in the rolling direction (RD). In practical, the magnetic field is not ideally in the direction of RD when the GOES is really operating. Therefore, a comprehensive insight into the magnetic anisotropy of GOES can help researchers to better utilize GOES. In addition, energy losses in electrical equipment and ambient temperatures can cause GOES to operate over a variable temperature. In order to design electrical equipment precisely, it is necessary to investigate the effect of temperature on the magnetic anisotropy of GOES. In this paper, the magnetic properties of GOES such as magnetic flux density, specific core loss, permeability, etc. are investigated at different temperatures and magnetization angles by experimental and theoretical analysis. The results show that the temperature has a significant effect on the magnetic anisotropy of GOES. The increase of temperature will increase the magnetic flux density and permeability in the unsaturated state, which is the most obvious in the range of easy magnetization angle. In the saturated state, an increase in temperature causes a decrease in flux density and permeability at the easy magnetization angle, i.e., in the range of 0°–30°, and the opposite law occurs at the difficult magnetization angle, i.e., in the range of 50°–70°. Similar to the properties of non-grain oriented electrical steel, an increase in temperature causes a decrease in iron loss, and their pattern of change is minor in relation to the magnetic anisotropy, and the reason for the decrease is the hysteresis loss and eddy current loss reduction. This paper reveals the relationship between magnetic anisotropy and temperature, and proves that the sensitivity of magnetic flux density and permeability to temperature is related to magnetization. The research content is not only of great significance to the cognition of material properties, but also can guide the design and performance prediction of electrical equipment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electric Engineering, Shenyang University of Technology 1 , Shenyang 110870,

College of Mechanical and Aerospace Engineering, Jilin University 2 , Changchun 130025, Jilin,

Xuzhou Heavy Machinery Co., Ltd. 3 , Xuzhou 221 004, Jiangsu,

Suzhou Inn-Mag New Energy Ltd. 4 , Suzhou 215021,

Funding

Ministry of Industry and Information Technology of the People’s Republic of China · Major Science and Technology Projects in Anhui Province · Department of Education of Liaoning Province

References (8)

Show source-provided references
1. Design of innovative radial flux permanent magnet motor alternatives with non-oriented and grain-oriented electrical steel for servo applications10.1109/tmag.2021.3078090 ↗
2. Shape design optimization and comparative analysis of a novel synchronous reluctance machine with grain-oriented silicon steel10.1109/tmag.2024.3408809 ↗
3. Measurement and modeling of anisotropic magnetostriction characteristic of grain-oriented silicon steel sheet under DC bias10.1109/tmag.2013.2281599 ↗
4. Temperature dependence of powder cores magnetic properties for medium-frequency applications10.1109/tmag.2021.3092013 ↗
5. Magnetic property measurement and analysis of high-frequency soft magnetic materials under non-sinusoidal excitation considering temperature effect10.1063/9.0000469 ↗
6. Magnetic characterization of soft magnetic cores at cryogenic temperatures10.1109/tasc.2019.2901371 ↗
7. Analysis of magnetomechanical properties at the tooth–yoke embedding position in grain-oriented electrical steel electric motors10.1109/tmag.2024.3401141 ↗
8. Design and analysis of permanent magnet synchronous machine with stator tooth splicing structure using grain oriented electrical steel10.1109/TEC.2024.3477578 ↗