On real-time control of microstructure of TiAl specimens with varied cross-sections based on numerical calculation and machine learning
Source abstract
Abstract
In our previous study, TiAl alloys with varied cross-sections were prepared via the electromagnetic cold crucible zone melting (ECCZM) method. However, due to the unstable temperature field, the equiaxed grain region appeared in the columnar grain, disrupting the microstructure continuity. Herein, the processing method was redesigned based on numerical calculation and machine learning (ML). Real-time adjusted processing parameters were established to stabilize the temperature field. Firstly, the equation of absorbed heating power about withdrawing distance was calculated based on the magnetic field distribution in the cold crucible, and the input power was adjusted in real-time accordingly. Subsequently, a combination of real-time adjusted input power and withdrawing rate was established based on the balance of absorbed heating power and heat loss in the mushy zone. The specimen with real-time adjusted input power and withdrawing rate was also prepared. In addition, the matched input power and withdrawing rate were optimized by ML, and the TiAl alloy without equiaxed grain was obtained via the new processing method. Microstructure and mechanical properties of the directionally solidified TiAl alloy with the conventional ECCZM method (CM) and the real-time adjusted (RA) method were compared. It was found that equiaxed grains would induce intergranular fracture . The ML-optimized RA method can eliminate equiaxed grain and obviate the occurrence of intergranular fracture during tensile deformation, thus preventing early fracture and improving the tensile strength.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Development of TiAl alloys with excellent mechanical properties and oxidation resistance10.1016/j.matdes.2013.08.083 ↗
2. Microstructure control of Ti-45Al-8.5Nb-(W, B, Y) alloy during the solidification process10.1016/j.actamat.2016.04.021 ↗
3. Molecular dynamics simulation of tensile deformation and fracture of γ-TiAl with and without surface defects10.1016/j.jmst.2015.12.001 ↗
4. Study of microstructure evolution and preference growth direction in a fully laminated directional micro-columnar TiAl fabricated using laser additive manufacturing technique10.1016/j.matlet.2019.01.137 ↗
5. Microstructural control of TiAl–Nb alloys by directional solidification10.1016/j.actamat.2011.10.009 ↗
6. Microstructure, mechanical and tribological performances of a directionally solidified γ-TiAl alloy10.1016/j.matchar.2021.111393 ↗
7. Effects of multi-step heat treatment on the microstructure, segregation and property of a directional solidified Ti-45.5Al–3Nb-0.11C-0.3Si alloy produced by electromagnetic confinement10.1016/j.msea.2020.139962 ↗
8. The science, technology, and implementation of TiAl alloys in commercial aircraft engines10.1557/opl.2013.44 ↗
9. Lamellar orientation and growth direction of α phase in directionally solidified Ti-46Al-0.5W-0.5Si alloy10.1016/j.intermet.2012.01.010 ↗
10. Effects of solidification parameters on the growth direction of α phase in directionally solidified Ti-49Al alloy10.1016/j.intermet.2017.07.008 ↗
11. Microstructure control and mechanical properties of directionally solidified large size TiAl alloy by electromagnetic confinement10.1016/j.intermet.2021.107406 ↗
12. Y. Li, L. Liu, T. Huang, H. Wang, J. Zhang, H. Fu, Multi-scale characterization of stray grain in the platform of nickel-base single crystal turbine blade, 131, 2016, pp. 181–187.10.1016/j.vacuum.2016.06.016 ↗
13. A design of non-uniform thickness mould for controlling temperature gradient and S/L interface shape in directionally solidified superalloy blade10.1016/j.matdes.2016.12.071 ↗
14. Microstructure transition of γ-TiAl alloys with abrupt cross-sections in yttria ceramic moulds during directional solidification by electromagnetic cold crucible10.1016/j.jmrt.2022.05.056 ↗
15. Secondary dendrite arm migration caused by temperature gradient zone melting during peritectic solidification10.1016/j.actamat.2012.01.034 ↗
16. Accelerating materials discovery using machine learning10.1016/j.jmst.2020.12.010 ↗
17. Singh, Accelerated prediction of Vickers hardness of Co- and Ni-based superalloys from microstructure and composition using advanced image processing techniques and machine learning10.1016/j.actamat.2020.06.042 ↗
18. Machine learning assisted design of high entropy alloys with desired property10.1016/j.actamat.2019.03.010 ↗
19. Evolution analysis of γ' precipitate coarsening in Co-based superalloys using kinetic theory and machine learning10.1016/j.actamat.2022.118101 ↗
20. Accelerated design for magnetocaloric performance in Mn-Fe-P-Si compounds using machine learning10.1016/j.jmst.2021.03.082 ↗
21. Accelerated design of Fe-based soft magnetic materials using machine learning and stochastic optimization10.1016/j.actamat.2020.05.006 ↗
22. A data-driven framework to predict the morphology of interfacial Cu6Sn5 IMC in SAC/Cu system during laser soldering10.1016/j.jmst.2019.12.036 ↗
23. Predicting the geometric form of clad in laser cladding by powder using multiple regression analysis (MRA)10.1016/j.matdes.2007.01.023 ↗
24. Mechanism and evolution of heat transfer in mushy zone during cold crucible directionally solidifying TiAl alloys10.1016/j.ijheatmasstransfer.2013.03.081 ↗
25. Selection of microstructures in rapid solidification processing10.1016/0921-5093(94)90538-X ↗
26. Dendritic growth10.1179/imr.1994.39.2.49 ↗
27. Theory of microstructural development during rapid solidification10.1016/0001-6160(86)90056-8 ↗
28. Morphological stability of a planar interface under rapid solidification conditions10.1016/0001-6160(86)90112-4 ↗
29. A study of the cleavage fracture behavior of PST TiAl alloys10.1016/S0921-5093(97)00610-2 ↗
30. Microstructure manipulation and strengthening mechanism of TiAl composites reinforced by Cr solid solution and in-situ nanometer-sized TiB2 particles10.1016/j.msea.2022.143214 ↗
31. Failure of metals I: Brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
32. Microscale simulation of stray grain formation in investment cast turbine blades10.1016/S0921-5093(04)00914-1 ↗
33. Effects of extrusion deformation on microstructure, mechanical properties and hot workability of β containing TiAl alloy10.1016/j.msea.2013.02.005 ↗
34. Microstructure determined fracture behavior of a high Nb containing TiAl alloy10.1016/j.msea.2016.04.074 ↗