Experimental verification of a novel hierarchical lattice material with superior buckling strength
Source abstract
Abstract
Recently, a systematic approach for the design of lattice materials with extreme buckling strength has led to optimized hierarchical lattice materials with unprecedented load carrying capacity. This is obtained at the cost of a small decrease in linear stiffness. However, the superior buckling resistance of such optimized hierarchical lattice materials has so far only been predicted numerically. In fact, concerns have been raised regarding the validity of the employed linear buckling analysis and potential risk of catastrophic failure due to the coalescence of multiple critical buckling modes. This work aims at refuting these concerns by designing and testing manufacturable novel hierarchical lattice materials with superior buckling strength. Thereby, the basis is provided for wide applications of these high-performing materials in mechanical design. A novel hierarchical material is generated for this work by combining the mentioned design procedure with a requirement on the minimum feature size to ensure manufacturability. For addressing the raised concerns, the optimized material design, together with a reference material, is realized with the help of additive manufacturing and experimentally tested in uniaxial compression. The obtained results are compared to numerical simulations considering geometrical and material nonlinearities, and an overall good agreement is found between experimental and numerical results. This confirms an increase in buckling resistance and post-buckling load carrying capacity by a factor of more than three compared to the regular reference lattice structure. Hence, the buckling superiority of this novel type of architected materials is clearly demonstrated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Structural Analysis and Optimization · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil and Mechanical Engineering, Technical University of Denmark , Nils Koppels Allé, Building 404, 2800 Kgs. Lyngby, Denmark
Funding
Villum Fonden · Danmarks Frie Forskningsfond
References (28)
Show source-provided references
1. The elastic moduli of heterogeneous materials10.1115/1.3636446 ↗
2. Materials with prescribed constitutive parameters: An inverse homogenization problem10.1016/0020-7683(94)90154-6 ↗
3. Tailoring materials with prescribed elastic properties10.1016/0167-6636(94)00069-7 ↗
4. Hybrid materials to expand the boundaries of material-property space10.1111/j.1551-2916.2011.04559.x ↗
5. Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness10.1038/nature21075 ↗
6. 3D architected isotropic materials with tunable stiffness and buckling strength10.1016/j.jmps.2021.104415 ↗
7. Using origami design principles to fold reprogrammable mechanical metamaterials10.1126/science.1252876 ↗
8. Multistable architected materials for trapping elastic strain energy10.1002/adma.201501708 ↗
9. Tailored buckling microlattices as reusable light-weight shock absorbers10.1002/adma.201600610 ↗
10. Materials with structural hierarchy10.1038/361511a0 ↗
11. Strong, lightweight, and recoverable three-dimensional ceramic nanolattices10.1126/science.1255908 ↗
12. Resilient 3D hierarchical architected metamaterials10.1073/pnas.1509120112 ↗
13. Deformation mechanisms in negative Poisson ratio materials: Structural aspects10.1007/bf01130170 ↗
14. 3D soft metamaterials with negative Poisson’s ratio10.1002/adma.201301986 ↗
15. Design of materials with prescribed nonlinear properties10.1016/j.jmps.2014.05.003 ↗
16. Systematic design of 3D auxetic lattice materials with programmable Poisson’s ratio for finite strains10.1016/j.jmps.2018.01.013 ↗
17. Snapping mechanical metamaterials under tension10.1002/adma.201502809 ↗
18. Soft network composite materials with deterministic and bio-inspired designs10.1038/ncomms7566 ↗
19. Exploiting microstructural instabilities in solids and structures: From metamaterials to structural transitions10.1115/1.4037966 ↗
20. Topology optimization of periodic microstructures with buckling criteria
21. Buckling strength topology optimization of 2D periodic materials based on linearized bifurcation analysis10.1016/j.cma.2018.04.031 ↗
22. Nonlinear compressive stability of hyperelastic 2D lattices at finite volume fractions10.1016/j.jmps.2019.103851 ↗
23. Numerical investigation of stiffness and buckling response of simple and optimized infill structures10.1007/s00158-020-02525-3 ↗
24. On projection methods, convergence and robust formulations in topology optimization10.1007/s00158-010-0602-y ↗
25. Large elastic deformations of isotropic materials. IV. Further developments of the general theory10.1098/rsta.1948.0024 ↗
26. GetFEM: Automated FE modeling of multiphysics problems based on a generic weak form language10.1145/3412849 ↗
27. Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities10.1002/nme.2579 ↗
28. Nonlinear correction to the Euler buckling formula for compressed cylinders with guided-guided end conditions10.1007/s10659-010-9265-6 ↗