journal article·2022-11-01Open access

Microstructure and mechanical property of gas tungsten arc and friction stir welds of L12 precipitate FCC high-entropy alloy

Poying Hsieh, Chihhsien Liao, Hungchih Liu, Poting Lin, Paikeng Shen, Shaowei Hunag, Yutaka S. Sato, Chewei Tsai

APL Materials· Volume 10· Issue 11

Abstract

The welding technology is significant for application of high-entropy alloys (HEAs) in the industry. In this study, the mechanical properties and microstructures of Al0.2Co1.5CrFeNi1.5Ti0.3 after welding by gas tungsten arc (GTA) welding and friction stir welding (FSW) are discussed, respectively. GTA welding of precipitated HEAs resulted in the formation of dendrites in the fusion zone; the hardness and tensile strength of the GTA weld decreased to 68% and 51% compared to the base metal, respectively. However, FSW exhibited excellent mechanical properties, which were still over 94% of the hardness value and tensile strength of the base metal. The microstructure was characterized by discontinuous dynamic recrystallization and the grain refinement effect in the stir zone. The microstructure of the two welds resulted in different mechanical properties. The weld after FSW was strengthened by the grain refinement strengthening, which almost compensates the decrease in hardness caused by the re-dissolution of all precipitates in the stir zone, while the dendritic structure strongly affected the mechanical properties and softened the fusion zone after the GTA process. During the tensile test, the digital image correlation was conducted simultaneously. It shows that the GTA weld had lower strength with nonuniform deformation in the fusion zone, while the FSW weld showed higher strength with uniform deformation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, National Tsing Hua University 1 , Hsinchu, Taiwan

Department of Materials Processing, Tohoku University 2 , Sendai, Japan

High Entropy Materials Center, National Tsing Hua University 3 , Hsinchu, Taiwan

Funding

Ministry of Science and Technology, Taiwan

References (47)

Show source-provided references
1. Adv. Eng. Mater. · 2004 · 6 · 29910.1002/adem.200300567 ↗
2. Acta Mater. · 2017 · 122 · 44810.1016/j.actamat.2016.08.081 ↗
3. Scr. Mater. · 2016 · 113 · 10610.1016/j.scriptamat.2015.10.025 ↗
4. Mater. Chem. Phys. · 2007 · 103 · 4110.1016/j.matchemphys.2007.01.003 ↗
5. Acta Mater. · 2017 · 122 · 1110.1016/j.actamat.2016.09.032 ↗
6. J. Alloys Compd. · 2016 · 688 · 99410.1016/j.jallcom.2016.07.239 ↗
7. Acta Mater. · 2013 · 61 · 488710.1016/j.actamat.2013.04.058 ↗
8. Wear · 2006 · 261 · 51310.1016/j.wear.2005.12.008 ↗
9. Wear · 2010 · 268 · 65310.1016/j.wear.2009.10.013 ↗
10. Mater. Sci. Eng.: A · 2010 · 527 · 581810.1016/j.msea.2010.05.052 ↗
11. Acta Mater. · 2011 · 59 · 630810.1016/j.actamat.2011.06.041 ↗
12. Mater. Chem. Phys. · 2005 · 92 · 11210.1016/j.matchemphys.2005.01.001 ↗
13. Corros. Sci. · 2017 · 119 · 3310.1016/j.corsci.2017.02.019 ↗
14. Corros. Sci. · 2008 · 50 · 205310.1016/j.corsci.2008.04.011 ↗
15. J. Alloys Compd. · 2013 · 549 · 19510.1016/j.jallcom.2012.09.091 ↗
16. Corros. Sci. · 2018 · 133 · 12010.1016/j.corsci.2018.01.030 ↗
17. Adv. Powder Technol. · 2021 · 32 · 37810.1016/j.apt.2020.12.019 ↗
18. Surf. Coat. Technol. · 2010 · 204 · 198910.1016/j.surfcoat.2009.12.006 ↗
19. J. Alloys Compd. · 2019 · 774 · 85610.1016/j.jallcom.2018.09.342 ↗
20. J. Alloys Compd. · 2021 · 885 · 16103810.1016/j.jallcom.2021.161038 ↗
21. Acta Mater. · 2016 · 109 · 31410.1016/j.actamat.2016.02.049 ↗
22. Sci. Rep. · 2017 · 7 · 1265810.1038/s41598-017-13026-7 ↗
23. Appl. Mater. Today · 2019 · 15 · 52510.1016/j.apmt.2019.04.001 ↗
24. Nat. Commun. · 2016 · 7 · 1060210.1038/ncomms10602 ↗
25. Science · 2014 · 345 · 115310.1126/science.1254581 ↗
26. Intermetallics · 2017 · 88 · 6510.1016/j.intermet.2017.05.009 ↗
27. J. Alloys Compd. · 2010 · 490 · 16010.1016/j.jallcom.2009.10.088 ↗
28. 2016
29. Metall. Mater. Trans. A · 1999 · 30 · 242910.1007/s11661-999-0251-1 ↗
30. Metall. Mater. Trans. A · 2001 · 32 · 118910.1007/s11661-001-0128-4 ↗
31. Sci. Technol. Weld. Joining · 2016 · 21 · 37410.1080/13621718.2015.1119967 ↗
32. Mater. Des. · 2021 · 197 · 10923810.1016/j.matdes.2020.109238 ↗
33. J. Alloys Compd. · 2015 · 653 · 37910.1016/j.jallcom.2015.09.042 ↗
34. Mater. Sci. Eng.: A · 2021 · 805 · 14055110.1016/j.msea.2020.140551 ↗
35. Adv. Eng. Mater. · 2021 · 23 · 210056410.1002/adem.202100564 ↗
36. Intermetallics · 2019 · 110 · 10647610.1016/j.intermet.2019.106476 ↗
37. Mater. Chem. Phys. · 2018 · 210 · 10310.1016/j.matchemphys.2017.10.064 ↗
38. Int. J. Plast. · 2018 · 100 · 17710.1016/j.ijplas.2017.10.005 ↗
39. Superalloys · 2000 · 5 · 22910.7449/2000/Superalloys_2000_229_238 ↗
40. J. Mater. Sci. · 1981 · 16 · 70710.1007/bf02402788 ↗
41. Acta Metall. · 1980 · 28 · 4110.1016/0001-6160(80)90039-5 ↗
42. J. Iron Steel Res. Int. · 2009 · 16 · 7510.1016/s1006-706x(10)60031-3 ↗
43. Mater. Sci. Eng. · 1983 · 59 · 6910.1016/0025-5416(83)90089-7 ↗
44. Int. Mater. Rev. · 2001 · 46 · 5310.1179/095066001101528402 ↗
45. Metall. Mater. Trans. B · 1972 · 3 · 271710.1007/bf02652839 ↗
46. J. Mater. Sci. Lett. · 1998 · 17 · 7910.1023/A:1006510228181 ↗
47. Mater. Res. Lett. · 2016 · 4 · 14510.1080/21663831.2016.1153004 ↗